Search

We investigated velocity and anisotropic structure of the crust beneath the eastern margin of the Tibetan Plateau to better understand its deformation and evolution mechanism. We performed H‐κand Pmsanisotropy analyses to obtain crustal thickness, Vp/Vsratio, fast polarization direction, and splitting time from 711 stations, and further conducted quality control using slowness, harmonic and statistical analyses. The Songpan‐Ganzi Block has a large splitting time and a fast polarization direction roughly parallel to the GPS motion and SKS fast direction. It also shows an overall high but complex distribution of Vp/Vsratio, and large variations in crustal thickness, indicating that crustal deformation is likely caused by crustal shortening and lower crustal flow. The northern Sichuan‐Yunnan Rhombic Block (SYRB) is featured by a thick crust and high Vp/Vsratio, suggesting that the crust is likely inflated by partial melting lower crustal rocks. The subblock also exhibits a strong azimuthal anisotropy with a splitting time greater than 0.6 s. The fast polarization direction aligns with the nearly N‐S extended direction and rotates clockwise in front of the Emeishan Large Igneous Province (ELIP). The observed anisotropy agrees with aligned amphibole minerals under a simple shear condition, supporting a southward lower crust flow being diverted by the ELIP. Anisotropy measurements on the southern SYRB are less robust and widely scattered, suggesting a deformation mechanism different from the northern SYRB. In addition, the southeastern margin of the Sichuan Basin shows a systematic pattern of crustal anisotropy consistent with a pure shear deformation mechanism. We studied the crustal structure and deformation beneath the eastern edge of the Tibetan Plateau. By analyzing teleseismic data from 727 stations, we measured crust thickness, Vp/Vs ratio, and azimuthal anisotropy using receiver functions. Our findings show a complex crustal behavior pattern in the eastern Tibet margin. In the Songpan‐Ganzi Block, crustal shortening and lower crust flow seem to be causing deformation. The northern Sichuan‐Yunnan Rhombic Block, with its thick crust and high Vp/Vsratio, appears to be influenced by partial melting of lower crust rocks. And a southward lower crust flow being diverted by the Emeishan Large Igneous Province. The eastern and southern part of this block shows a different pattern, indicating a unique deformation mechanism. Additionally, the southeastern margin of the Sichuan Basin appears to undergo a distinct type of crustal deformation. A new crustal model with much more reliable and denser Pmsanisotropic measurements is built in the eastern Tibetan MarginSongpan‐Ganzi Block is likely deformed by crustal shortening and lower crustal flowChannel flow may exist in the west low velocity zone (LVZ) while absent at the east LVZ A new crustal model with much more reliable and denser Pmsanisotropic measurements is built in the eastern Tibetan Margin Songpan‐Ganzi Block is likely deformed by crustal shortening and lower crustal flow Channel flow may exist in the west low velocity zone (LVZ) while absent at the east LVZ

The Fenhe‐Weihe Rift (FWR) system is one of the most active rift zones in east China, and plays an important role in the reactivation of the North China Craton. In this work, a high‐resolution 3‐D lithospheric Swave velocity model of the FWR is built by joint inversion of receiver functions and ambient noise. Strong correlation between topography and tectonic features is observed at shallow depths. At great depths, strong heterogeneities are observed along the FWR: (1) high‐velocity anomalies emerge beneath the Weihe and Taiyuan basins in the lower crust; (2) two high‐velocity anomalies are imaged in the uppermost mantle beneath the south to central FWR; and (3) two strong large‐scale, low‐velocity zones are observed beneath the north Trans‐North China Oregon: one is at ~60 km and the other one is much larger with a deeper source. Based on the petrologic properties, geochemical analyses, and seismic images obtained in this work, we propose that the rifting mechanisms between the south and north FWR are different. In the south, the rifting could be mainly caused by the passive effects from the uplift of the Tibetan Plateau, while in the north the rifting is due to the combined effects of the asthenosphere upwelling and the counterclockwise rotation of the Ordos block. The uppermost mantle high‐velocity anomalies underneath the south to central part of the FWR could be the remnants of strong ancient cratonic root, and act as mechanical barriers to block the rifting processes between the south and north FWR. A high‐resolution 3‐D crustal and uppermost mantle model of Swave velocity of the Fenhe‐Weihe Rift (FWR) is based on joint inversions of receiver functions and ambient noise. Two high‐velocity bodies are imaged in the uppermost mantle beneath the south to central FWR, while a large‐scale, low‐velocity zone was located beneath the north Trans‐North China Oregon. Passive rifting in the southern FWR is due to the uplift of the Tibetan Plateau, while rifting in the northern FWR is ascribed to the joint effects of the asthenosphere upwelling and propagation of the rifting from the south. A high‐resolution 3‐D lithospheric Swave model of the FWR based on joint inversions of receiver functions and ambient noiseTwo high‐velocity bodies in the uppermost mantle beneath south to central FWR and a large‐scale, low‐velocity zone beneath the north TNCODifferent rifting mechanisms between the south and north FWR deciphered by the 3‐D seismic images in this work and previous evidences

The formation of a new ocean basin provides a unique observational window into the structure and deformation of the oceanic lithosphere. This study offers a detailed 1‐D vertically polarized shear‐wave velocity model of the young Japan Basin by interpreting S receiver functions, seafloor Rayleigh wave ellipticities and phase velocities in a Bayesian trans‐dimensional framework. The models suggest a distinct discontinuity in the mid‐lithosphere. Additional analyses indicate that the upper layer is characterized by strong positive radial anisotropy, while the lower layer is more isotropic. We interpret that the upper layer was formed during the back‐arc opening at 20–15 Ma, where the olivine lattice‐preferred orientation (LPO) fabric induced by passive upwelling contributes to the positive radial anisotropy. The lower, less anisotropic layer may be solidified after the sudden cessation of the opening. Small‐scale convection (SSC) from such a major tectonic event could randomize the LPO enough to weaken radial anisotropy before cooling down the asthenosphere, leaving a radially anisotropic discontinuity in the present‐day mid‐lithosphere. The proposed layered evolution history of the lithosphere beneath the Japan Basin illuminates an important role of the small‐scale convection in modifying the structural fabrics of the asthenosphere in terms of radial anisotropy. Such an SSC‐induced radial anisotropy drop could also occur at the base of the lithosphere in regions with ongoing seafloor spreading and enhance the velocity drop of horizontally polarized shear waves. Thus, the role of SSC is non‐negligible in explaining the sharpness of the Gutenberg discontinuity detected by SS precursors beneath the oceanic lithosphere. The formation of the oceanic lithosphere is associated with a relatively simple mantle convection process called seafloor spreading, but may also be affected by more complex, localized processes such as small‐scale mantle convection. To decipher the evolution history of the lithosphere of the Japan Basin, the Sea of Japan, this study collects earthquake waveforms from broadband ocean‐bottom seismometers and offers a detailed 1‐D seismic structural model beneath the Japan Basin by interpreting the multiple seismological observables in a trans‐dimensional Bayesian framework. Our seismic velocity model and associated analysis reveal that the oceanic lithosphere of the Japan Basin is seismically more complex than expected. The upper and lower parts of the lithosphere show distinct seismic anisotropy properties. We propose a layered evolution model for the lithosphere of the Japan Basin, in which small‐scale convection followed a normal seafloor spreading, and resulted in a structural discontinuity in the present‐day mid‐lithosphere. The proposed model highlights the role of the small‐scale convection in modifying the structural fabrics of the asthenosphere in terms of radial anisotropy. We construct detailed 1‐D Vsv models of the Japan Basin by trans‐dimensional inversion of multiple observables extracted from ocean‐bottom seismometers recordsOur analysis reveals a mid‐lithosphere discontinuity arising from strong positive radial anisotropy in the upper lithosphereA layered evolution mode associated with small‐scale convection is proposed for the lithosphere of the Japan Basin We construct detailed 1‐D Vsv models of the Japan Basin by trans‐dimensional inversion of multiple observables extracted from ocean‐bottom seismometers records Our analysis reveals a mid‐lithosphere discontinuity arising from strong positive radial anisotropy in the upper lithosphere A layered evolution mode associated with small‐scale convection is proposed for the lithosphere of the Japan Basin

Situated in a transition zone between the western and eastern North China Craton (NCC), the central NCC exhibits complex dynamics features. Significant lithosphere thinning is observed beneath the eastern NCC and the northern segment of the central NCC. To study how the crust responses to the distinct lateral variations of the lithospheric mantle, we develop a method for joint inversion of Rayleigh and Love dispersion curves based on a transverse‐isotropic (or radial anisotropy) medium and obtain a 3‐D crustal radial anisotropy model. The results reveal significant heterogeneities along the Cenozoic Fenhe‐Weihe Rift (FWR). In the northern FWR, the discretely distributed lower crust positive anisotropy and upper crust negative anisotropy suggest the rifting is mainly dominated by the active mantle upwelling resulting in the Datong volcanoes. Similarly, the northern segment of the Taihang Mountain is also strongly affected by the magmatic activities and exhibits different anisotropy properties compared to its central‐to‐southern counterpart. Based on the negative anisotropy observed in the middle‐to‐lower crust beneath most parts of the Taihang Mountain, we speculate that a lower‐crust compression model can be applied to the Taihang Mountain, which is totally different to that of the adjacent Bohai Bay Basin. Possibly, the root of the Taihang Mountain is pushed by the westward moving lower crust coupled with the lateral escaping mantle flow beneath the Bohai Bay Basin. The Taihang Mountain and the Bohai Bay Basin are formed in similar tectonic environments, but are deformed in different ways. A 3‐D crustal radial anisotropy model of the central North China Craton is builtMantle upwelling dominates the northern Fenhe‐Weihe Rift and northern Taihang MountainCrustal radial anisotropy evidences the lower‐crust compression beneath the southern the Taihang Mountain