Search

Nanovaccines have shown to be effective, and this is the reason they are preferred than conventional vaccines. The scope of this review is to describe the role, mechanisms, and advantages of nano vaccines based on lipids, and present the most important types, their physicochemical characteristics, as well as their challenges. The most important categories of lipid nano-vaccines are liposomal nano vaccines and (virus-lipid nanoparticles (NPs)/virosomes. Examples of vaccine formulations from each category are presented and analyzed below, focusing on their structure and physicochemical characteristics. In all cases, a nanoscale platform is used, enriched with adjuvants, antigens, and other helping agents to trigger immune response process and achieve cell targeting, and eventually immunity against the desired disease. The exact mechanism of action of each vaccine is not always completely known or understood. Physicochemical characteristics, such as particle size, morphology/shape, and zeta potential are also mentioned as they seem to affect the properties and mechanism of action of the vaccine formulation.

At the dawn of a new nanotechnological era in the pharmaceutical field, it is very important to examine and understand all the aspects that influence in vivo behaviour of nanoparticles. In this point of view, the interactions between serum proteins and liposomes with incorporated anionic, cationic, and/or PEGylated lipids were investigated to elucidate the role of surface charge and bilayer fluidity in protein corona's formation. 1,2-dipalmitoyl-sn-glycero-3- phosphocholine (DPPC), hydrogenated soybean phosphatidylcholine (HSPC), and 1,2-dioctadecanoyl-sn-glycero-3-phosphocholine (DSPC) liposomes with the presence or absence of 1,2-dipalmitoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (sodium salt) (DPPG), 1,2-di-(9Z-octadecenoyl)-3-trimethylammonium-propane (chloride salt) (DOTAP), and/or 1,2-dipalmitoylsn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-5000] (DPPE-PEG 5000) lipids were prepared by the thin-film hydration method. The evaluation of their biophysical characteristics was enabled by differential scanning calorimetry and dynamic and electrophoretic light scattering. The physicochemical characteristics of mixed liposomes were compared before and after exposure to foetal bovine serum (FBS) and were correlated to calorimetric data. Our results indicate protein binding to all liposomal formulations. However, it is highlighted the importance of surface charge and fluidisation effect to the extent of protein adsorption. Additionally, considering the extensive use of cationic lipids for innovative delivery platforms, we deem PEGylation a key parameter, because even in a small proportion can reduce protein binding, and thus fast clearance and extreme toxicity without affecting positive charge. This study is a continuation of our previous work about protein-liposome interactions and fraction of stealthiness (Fs) parameter, and hopefully a design road map for drug and gene delivery.

The aim of the present study is the development and evaluation of the physicochemical properties of chimeric hydrogenated soya phosphatidylcholine (HSPC) and egg phosphatidylcholine (EggPC) liposomes with incorporated triblock copolymer Poloxamer P407 (P407). The physicochemical assay was held in water HPLC-grade and Foetal Bovine Serum (FBS), in order to determine whether these systems can be used as drug or antigen delivery nanosystems. Dynamic and electrophoretic light scattering (DLS/ELS) techniques were used for the measurement of the hydrodynamic diameter, the polydispersity index, and the ζ-potential of the prepared nanosystems. The incorporation of the P407 resulted in a size reduction of all systems. A decrease in the hydrodynamic diameter and polydispersity index were also found as a result of increasing the storage temperature from 4 °C to 25 °C, attributed to P407. The experiments that were carried out in FBS, showed that the addition of P407 improved systems stealth properties. Concluding, we propose P407 as a promising alternative to PEG in the development of lipid nanoparticles with optimized bio- and shelf-stability.

The purpose of this study is to prepare stimuli-responsive chimeric liposomes (i.e. hybrid polymer-lipid liposomes) containing functional copolymers and conduct aqueous solution studies in order to determine their properties and potential as drug-delivery nanocarriers. Two random copolymers, composed of the hydrophilic, pH and thermo-responsive 2-(dimethyl amino) ethyl methacrylate (DMAEMA) monomer and the hydrophobic stearyl methacrylate (SMA) monomer, were synthesized via free-radical polymerization and molecularly characterized using SEC, FTIR, and 1H-NMR. The synthesis was followed by aqueous solution studies, utilising dynamic light scattering (DLS) in order to determine their stimuli responsive self-assembly properties. The preparation of chimeric liposomes was mediated by thin film deposition and hydration, followed by aqueous solution studies via DLS, ζ-potential and fluorescence spectroscopy. The drug-loading studies include curcumin loading via a thin film deposition and hydration technique, while aqueous solution properties of the drug-loaded chimeric liposomes were determined utilizing DLS, and UV-Vis spectroscopy.

Elastic liposomes consist of phospholipids and of surfactants, could be considered as promising nanotechnological platforms for skin drug delivery. The aim of the present study was the formation of elastic liposomes by thin film hydration method, using different phospholipids and surfactants, in order to determine the effect of the components on their physical characteristics and on their physical stability. Physical properties of elastic liposomes were evaluated using dynamic light scattering (DLS)method. The particle size at the day of their preparation, was ranged between small and large unilamellar vesicles (SUVs and LUVs), dependent on the hydrophilicity of the surfactant used, while their PDI (Poly Dispersity Index) value was close to zero, indicating monodispersed systems. Physical stability study involved the measure of particle size, as a quantifiable physical property, at selected times over a 30-days period, at storage conditions: (i) 4 °C, (ii) 25 °C, iii) 45 °C, suggested that refrigerated conditions promote physical stability, while high temperatures induce aggregation. According to the physical stability study elastic liposomes composed ofTween80 were found to bemore stable than those composed of Span80, at ambient conditions. The goal of our investigation was centred to the development and evaluation of a well know liposomal category i.e. elastic liposomes, by modified their composition with common surfactants (i.e. Span and/or Tween), creating, a new liposomal class namely, elastic lipo-niosomes. To the best of knowledge this the first time that these hybrid vesicles appeared in the literature exhibiting the aforementioned category lipid/surfactants and molar ratios.

Liposomes have been on the market as drug delivery systems for over 25 years. Their success comes from the ability to carry toxic drug molecules to the appropriate site of action through passive accumulation, thus reducing their severe side effects. However, the need for enhanced circulation time and site and time-specific drug delivery turned research focus on other systems, such as polymers. In this context, novel composites that combine the flexibility of polymeric nanosystems with the properties of liposomes gained a lot of interest. In the present work a mixed/chimeric liposomal system, composed of phospholipids and block copolymers, was developed and evaluated in regards with its feasibility as a drug delivery system. These innovative nano-platforms combine advantages from both classes of biomaterials. Thermal analysis was performed in order to offers an insight into the interactions between these materials and consequently into their physicochemical characteristics. In addition, colloidal stability was assessed by monitoring z-potential and size distribution over time. Finally, their suitability as carriers for biomedical applications was evaluated by carrying out in vitro toxicity studies.

The aim of the present study is to investigate the interactions between liposomes and proteins and to evaluate the role of liposomal lipid composition and concentration in the formation of protein corona. Liposomes composed of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) or hydrogenated soybean phosphatidylcholine (HSPC) with 1,2-dipalmitoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (sodium salt) (DPPG), 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-3000] (DPPE-PEG 3000), cholesterol (CH) or mixtures of these lipids, were prepared at different concentrations by the thin-film hydration method. After liposomes were dispersed in HPLC-grade water and foetal bovine serum (FBS), their physicochemical characteristics, such as size, size distribution, and ζ -potential, were determined using dynamic and electrophoretic light scattering. Aggregation of DPPC, HSPC, DPPC:CH (9:1 molar ratio), and HSPC:CH (9:1 molar ratio) in FBS was observed. On the contrary, liposomes incorporating DPPG lipids and CH both in a molar ratio of 11% were found to be stable over time, while their size did not alter dramatically in biological medium. Liposomes containing CH and PEGylated lipids retain their size in the presence of serum as well as their physical stability. In addition, our results indicate that the protein binding depends on the presence of polyethylene glycol (PEG), CH, concentration and surface charge. In this paper, we introduce a new parameter, fraction of stealthiness ( F s ), for investigating the extent of protein binding to liposomes. This parameter depends on the changes in size of liposomes after serum incubation, while liposomes have stealth properties when F s is close to 1. Thus, we conclude that lipid composition and concentration affect the adsorption of proteins and the liposomal stabilization.

Liposomes are considered to be one of the most extensively investigated drug delivery nanosystems. Each drug can be loaded either in the liposomal hydrophilic core or within the lipidic bilayer and delivered eventually to the proper site into the organism. There are already many marketed approved liposomal products. The development of a liposomal product is a quite complicated process, while many critical parameters have to be investigated during the preparation process. The present study deals with the drug-to-lipid ratio (D/L ratio), which is a critical process parameter, expresses the actual capacity of the liposome to accommodate the drug and can play a key role at the optimization of every liposomal formulation. D/L ratio is affected by the composition, the different biomaterials and the loading method being used, so the improvement of D/L ratio can optimize the liposomal formulation. D/L ratio can be used as an index of the effectiveness of the preparation method too. Furthermore, D/L ratio influences the therapeutic efficacy of the liposomal product, expressing the actual dose of the drug being administrated. There is a variety of analytical methods, quantifying the drug and the lipids and estimating eventually the D/L ratio. According to the regulatory framework of nanomedicine, about the development of nanosimilars, D/L ratio is a necessary element for the nanosimilar product description and the statement of product comparability.

The application of stimuli-responsive medical practices has emerged, in which pH-sensitive liposomes figure prominently. This study investigates the impact of the incorporation of different amounts of pH-sensitive polymer, C 12 H 25 -PAA (poly(acrylic acid) with a hydrophobic end group) in l-α-phosphatidylcholine, hydrogenated (Soy) (HSPC) phospholipidic bilayers, with respect to biomimicry and functionality. PAA is a poly(carboxylic acid) molecule, classified as a pH-sensitive polymer, whose pH-sensitivity is attributed to its regulative -COOH groups, which are protonated under acidic pH (pKa ∼4.2). Our concern was to fully characterize, in a biophysical and thermodynamical manner, the mixed nanoassemblies arising from the combination of the two biomaterials. At first, we quantified the physicochemical characteristics and physical stability of the prepared chimeric nanosystems. Then, we studied their thermotropic behavior, through measurement of thermodynamical parameters, using Differential Scanning Calorimetry (DSC). Finally, the loading and release of indomethacin (IND) were evaluated, as well as the physicochemical properties and stability of the nanocarriers incorporating it. As expected, thermodynamical findings are in line with physicochemical results and also explain the loading and release profiles of IND. The novelty of this investigation is the utilization of these pH-sensitive chimeric advanced Drug Delivery nano Systems (aDDnSs) in targeted drug delivery which relies entirely on the biophysics and thermodynamics between such designs and the physiological membranes and environment of living organisms.

This study is focused on chimeric advanced drug delivery nanosystems and specifically on pH-sensitive liposomes, combining lipids and pH-responsive amphiphilic block copolymers. Chimeric liposomes composed of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and two different forms of block copolymers, i.e. poly(n-butylacrylate)-b-poly(acrylic acid) (PnBA-b-PAA) at 70 and 85% content of PAA at six different molar ratios, each form respectively. PAA block exhibits pH-responsiveness, because of the regulative group of -COOH. -COOH is protonated under acidic pH (pKa ca. 4.2), while remains ionized under basic or neutral pH, leading to liposomes repulse and eventually stability. Lipid bilayers were prepared composed of DPPC and PnBA-b-PAA. Experiments were carried out using differential scanning calorimetry (DSC) in order to investigate their thermotropic properties. DSC indicated disappearance of pre-transition at all chimeric lipid bilayers and slight thermotropic changes of the main transition temperature. Chimeric liposomes have been prepared and their physicochemical characteristics have been explored by measuring the size, size distribution and ζ-potential, owned to the presence of pH-responsive polymer. At percentages containing medium to high amounts of the polymer, chimeric liposomes were found to retain their size during the stability studies. These results were well correlated with those indicated in the DSC measurements of lipid bilayers incorporating polymers in order to explain their physicochemical behavior. The incorporation of the appropriate amount of these novel pH-responsive block copolymers affects thus the cooperativity, the liposomal stabilization and imparts pH-responsiveness.

Liposomes are well-known cell simulators and are currently studied as drug delivery systems, for a targeted delivery of higher drug concentrations, in specific cells. Novel biophotonic techniques for manipulation and characterization of liposomes have been developed; among which are optical tweezers. In our work, we demonstrate a novel use of line optical tweezers to manipulate and cause liposome deformations. Optical forces induce tension on liposomes, which are stretched along the line optical trap. The method of dielectrophoresis, combined with optical tweezers, was used to measure the exerted optical forces. As a consequence, in the case of reversible liposome deformations, the value of the shear and bending moduli of liposomes was calculated. We anticipate that the selective manipulation of liposomes will help us toward a better understanding of the cellular-liposome interactions. Studying the biomechanical properties of liposomes will provide an insight into the mechanical behavior of individual living cells, which have recently been implicated in many aspects of human physiology and patho-physiology. The biomechanical properties of cells (i.e. deformability, stiffness and elasticity) can be useful biomarkers for various disease processes and changes of the cell state.

Liposomes are widely used as delivery systems of cytotoxic drugs. The encapsulation into liposomes improves pharmacological properties and as a result therapeutic index and outcomes. To date, liposomal vincristine and cytarabine are approved and marketed for intravenous and intrathecal administration, respectively. The main goal of this review is to examine the clinical use and pharmacological properties, as well as the safety of liposomal forms of less widely used liposomal forms of anticancer agents compared to their conventional forms and to present data regarding clinical development of other liposomal agents. Liposomal forms of cytarabine and vincristine are less widely used and unknown compared to liposomal anthracyclines, because they are approved only for specific indications and only in the United States.

The major advance of mixed liposomes (the so-called chimeric systems) is to control the size, structure, and morphology of these nanoassemblies, and therefore, system colloidal properties, with the aid of a large variety of parameters, such as chemical architecture and composition. The goal of this study is to investigate the alterations of the physicochemical and morphological characteristics of chimeric dipalmitoylphosphatidylcholine (DPPC) liposomes, caused by the incorporation of block and gradient copolymers (different macromolecular architecture) with different chemical compositions (different amounts of hydrophobic component). Light scattering techniques were utilized in order to characterize physicochemically and to delineate the fractal morphology of chimeric liposomes. In this study, we also investigated the structural differences between the prepared chimeric liposomes as are visualized by scanning electron microscopy (SEM). It could be concluded that all the chimeric liposomes have regular structure, as SEM images revealed, while their fractal dimensionality was found to be dependent on the macromolecular architecture of the polymeric guest.

Dimethoxycurcumin (DMC) is a lipophilic analog of curcumin found in Curcuma longa Linn., which is known to possess significant activity against various cancer cell lines. The purpose of this study was to develop suitable liposomal formulations in order to overcome DMC's poor water solubility and to study the aggregation kinetic profile using the fractal analysis. DMC was incorporated into liposomal formulations composed of DPPC, DPPC:DPPG:chol (9:1:1 molar ratio) and DPPC:DODAP:chol (9:1:1 molar ratio) liposomes. Light scattering techniques were used to elucidate the physicochemical parameters of the liposomal formulations with and without DMC. The structural characteristics of the incorporated molecule were found to be crucial and promote the aggregation mechanism depending also on the liposomes' composition. The results of our study contribute to the overall scientific efforts to prepare efficient carriers for DMC and could be a useful tool in order to study more efficiently the kinetics of the aggregation process of the liposomal carriers.

Classical Newtonian Physics and Euclidean Geometry are currently used to describe biological phenomena and the processes of drug formulation, which are characterized by homogeneity and linearity. On the other hand, at the mesoscopic level, the principles and the laws of physics are quite different from the Classical Newtonian Physics and Euclidean approach especially at nanoscale dimension. The investigation of the aggregation process of liposomes is of paramount importance due to their applications in pharmaceutical nanotechnology as drug delivery systems and as membrane models, in biosciences. The physical stability and the aggregation process of colloidal systems as well as the surface phenomena are described using the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. The elucidation of the dimensionality of liposome aggregates obeys the fractal approach because the aggregation phenomena are irreversible. This approach can be correlated with the extended DLVO theory, which includes the hydration energy, too.

Current efforts toward improving the effectiveness of drug therapy are increasingly relying on drug-targeting strategies to effectively deliver bioactive molecules to their molecular targets. Pharmaceutical nanocarriers represent a major tool toward this aim, and our efforts have been directed toward achieving nanocarrier-mediated subcellular delivery of drug molecules with mitochondria as the primary subcellular target. Meeting the need for specific subcellular delivery is essential to realizing the full potential of many poorly soluble anticancer drugs. In this article, we report that mitochondria-targeted liposomes significantly improve the apoptotic and cytotoxic action of sclareol, a poorly soluble potential anticancer drug. The results support the broad applicability of our nanocarrier-mediated subcellular targeting approach as a means to improve the effectiveness of certain anticancer therapeutics.

Liposomes are ideal drug-delivery systems because they can alter the pharmacokinetic characteristics and biodistribution profile of the incorporated bioactive molecule. The effect of the aminoglycoside antibiotics, gentamicin (GN), tobramycin (TOB), and amikacin (AMI), on the thermodynamic properties of multilamellar vesicles composed of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) was studied by using differential scanning calorimetry (DSC), electron paramagnetic resonance (EPR), and (31)P nuclear magnetic resonance (NMR) spectroscopy. The relationship between the structure of aminoglycoside antibiotics and their effect on the physical properties of the liposomal bilayers was investigated. The incorporation of the drugs was achieved and an osmotic gradient created by controlling the mole ratio of the drug inside to that outside of the DPPC vesicles so that [drug(inside DPPC)]/[drug(outside DPPC)] was 1:0, 1:0.2, 1:1, or 1:2.5. Incorporation of the drugs into liposomes caused the T(m) to shift to a higher temperature and the delta H(m) and delta T(1/2) values to decrease. The 2A(max) and the order parameter (S), obtained from the EPR spectra, indicated that the fluidity of the liposomal membrane was affected by the type of drug and by the concentration used; GN and TOB decreased the fluidity and disturbed chain packing at mole ratios of [drug(inside DPPC)]/[drug(outside DPPC)] ranging from 1:0 to 1:0.2, while AMI increased the fluidity and disrupted chain packing at an osmotic gradient of 1:2.5. In conclusion, the molecular organization and thermotropic properties of the multilamellar DPPC vesicles were dependent on the osmotic gradient and structure of the aminoglycoside.

Nanoemulsions (NEs) and solid lipid nanoparticles (SLNs) are widely used colloidal carriers for bioactive compounds. They are used in therapeutic, diagnostic, and cosmetic formulations. Ceramides are main components of the stratum corneum and are essential for the efficient barrier function. Their very high lipophilicity renders them difficult to incorporate in an acceptable formulation. The aim of this work was to investigate the possibility of using the benefits of nanotechnology in the efficient topical delivery of ceramides formulated as NEs or SLNs. The physicochemical characteristics of such carriers incorporating ceramides were investigated and their stability over time was assessed. Their morphology was examined under a scanning electron microscope and the interactions of their components were studied by differential scanning calorimetry. The results showed that the nanoemulsions can incorporate a high percentage (48.4% of total lipids by weight) of ceramides giving more homogeneous particle distributions of spherical-shaped nanoparticles and they maintained their characteristics over time. On the contrary, SLNs' incorporation of ceramide higher than 10.8% of total lipids by weight led to the formation of rod-like nanoparticles deteriorating the homogeneity of the particle distribution, as depicted on the high polydispersity indexes of the corresponding formulations. The results demonstrate that NEs may be the more suitable carrier, compared to SLNs.

Food nanotechnology involves the utilization of nanocarrier systems to stabilize the bioactive materials against a range of environmental and chemical changes as well as to improve their bioavailability. Nanoliposome technology presents exciting opportunities for food technologists in areas such as encapsulation and controlled release of food materials, as well as the enhanced bioavailability, stability, and shelf-life of sensitive ingredients. Liposomes and nanoliposomes have been used in the food industry to deliver flavors and nutrients and, more recently, have been investigated for their abilityto incorporate antimicrobials that could aid in the protection of food products against microbial contamination. In this paper, the main physicochemical properties of liposomes and nanoliposomes are described and some of the industrially applicable methods for their manufacture are reviewed. A summary of the application of nanoliposomes as carrier vehicles of nutrients, nutraceuticals, enzymes, food additives, and food antimicrobials is also presented.

Thermodynamical techniques are applied for determining the thermal stress of medicinal compounds of the excipients as well as their interactions during the formulation process. The physicochemical properties and the stability of the medicinal products could be measured as a function of temperature or time using thermal analysis. Differential Scanning Calorimetry (DSC) is a suitable thermal analysis technique for determining the purity, the polymorphic forms and the melting point of a sample in the Pharmaceutical Industry. It is also considered as a tool to study the thermal behavior of lipid bilayers and of lipidic drug delivery systems, like liposomes by measuring thermodynamic parameters (i.e. DeltaH and Tm), which affect the stability of the liposomal suspension under given storage conditions.

Functionalized manoyl oxide derivatives have been proved over the years to evoke several biological responses. Among them, 3beta-hydroxy-manoyl oxide (1) and 3beta-acetoxy-manoyl oxide (2) have been shown to exhibit in vitro antimicrobial and cytotoxic activity, while N-imidazole-3 beta-thiocarbonyl ester of manoyl oxide (3) was found to exhibit potent cytotoxic effect. Their partitioning into phospholipid bilayers may lead to membrane structure modifications that are crucial in liposome development as they may influence their maintenance and integrity. DSC was used to study the modifications induced in DPPC bilayers by incorporating increasing concentrations of the three manoyl oxide derivatives. All derivatives were found to strongly affect the bilayer structural organization in terms of a decrease of the cooperativity, the fluidization and partially destabilization of the gel phase and the induction of a lateral phase separation in clustering domains. Derivatives 1 and 3 were incorporated into DPPC liposomes and their physicochemical stability was monitored at 4 degrees C. The stability of liposomes was strongly influenced by the presence of 1 and 3 at any molar ratio studied. DPPC/1 liposomes were found to retain its stability for 48 h at low concentration of 10% mol, while at higher concentrations up to 30% mol they collapsed into aggregated material. In all cases DPPC/3 liposomes were found unstable and sticky aggregated structures precipitated from the bulk suspension.

Liposomes composed of egg-phosphatidylcholine (EPC) incorporating quercetin (QR) were prepared by the thin-film hydration method (TFHM) and the monophase solution method (MSM). A rapid and slow freeze-drying process was applied for both laboratory and industrial scales. The purpose of this study was to compare the two methods of liposome preparation, and further determine whether the lyophilization process affects the liposome physicochemical characteristics (size, polydispersity index, and ?-potential) and incorporation of quercetin.

Liposomes are widely used vehicles for the delivery of bioactive molecules. They are composed mainly from acyl-phosphatidylcholines, cholesterol, and charged lipids (e.g., stearylamine, dipalmitoylphosphatidylglycerol (DPPG), phosphatidylethanolamine). The incorporation efficiencies of the bioactive molecule and the drug to lipid molar ratio are important factors for the assessment of the liposomal formulation. In order to successfully characterize a liposomal formulation, it is necessary to be able to accurately measure the lipids and the encapsulated molecule, using the smallest possible sample. The present work describes an analytical methodology on qualitative and quantitative determination of all the lipid ingredients that are involved in the liposome formulation, as well as the drug incorporation and the drug-lipid ratio, by a simultaneous measurement of all the liposomal ingredients using thin-layer chromatography coupled with a flame ionization detector (HPTLC/FID). The procedure requires only one measurement per sample, and it can be applied even in very small or much diluted samples. The proposed analytical method can be applied in general on all steps of the development of liposomal formulations. The purity and stability of the raw materials can also be easily evaluated. In addition the preparation procedure can be tracked in order to locate possible losses of raw material and errors of the preparation method resulting in the amelioration of the method.