Search

To efficiently recycle the GH78 thermostable rhamnosidase (TpeRha) and easily separate it from reaction mixture and furtherly improve the enzyme properties, the magnetic particle Fe3O4-SiO2-NH2-Cellu-ZIF8 (FSNcZ8) was prepared through modifying Fe3O4-NH2 with tetraethyl silicate (TEOS), microcrystalline cellulose and zinc nitrate hexahydrate. The FSNcZ8 displayed better magnetic stability and higher-temperature stability than unmodified Fe3O4-NH2 (FN), and it was used to adsorb and immobilize the GH78 thermostable rhamnosidase (TpeRha) from the Thermotoga petrophilea 13995. The properties of FSNcZ8-TpeRha were as follows: The optimal reaction temperature and pH were 90°C and 5.0; the highest activity of FSNcZ8-TpeRha approached 714 U/g; In addition, FSNcZ8-TpeRha had better higher-temperature stability than FN, after incubation at 80°C for 3 h, the residual enzyme activities of FSNcZ8-TpeRha, FN-TpeRha and free enzyme were 93.5%, 63.32% and 62.77%, respectively. The organic solvent tolerance and the monosaccharides tolerance of FSNcZ8-TpeRha, compared with free TpeRha, were greatly improved. Using Naringin (1 mmol/L) as the substrate, the optimal converting conditions were as follows: FSNcZ8-TpeRha concentration is 6 U/mL; induction temperature is 80°C; the pH is 5.5; induction time is 30 min, and the yield of products was same as free enzymes. After 10 times of repeated reaction, the conversion of Naringin remained above 80%, which showed a great improvement of the catalytic efficiency and repeated utilization at the immobilized α-L-rhamnosidase.

Notoginsenoside R1 and ginsenoside Rg1 are the main active ingredients of

β-Glucosidases and β-xylosidases are two categories of enzymes that could cleave out nonreducing, terminal β-D-glucosyl and β-D-xylosyl residues with release of D-glucose and Dxylose, respectively. In this paper, two functional β-glucosidase Dth3 and β-xylosidase Xln-DT from Dictyoglomus thermophilum were heterologously expressed in E.coli BL21 (DE3). Dth3 and Xln-DT were relatively stable at 75°C and were tolerant or even stimulated by glucose and xylose. Dth3 was highly tolerant to glucose with a Ki value of approximately 3 M. Meanwhile, it was not affected by xylose in high concentration. The activity of Xln-DT was stimulated 2.13- fold by 1 M glucose and 1.29-fold by 0.3 M xylose, respectively. Furthermore, the β- glucosidase Dth3 and β-xylosidase Xln-DT showed excellent selectivity to cleave the outer C-6 and C-3 sugar moieties of ASI, which established an effective and green method to produce the more pharmacologically active CAG, an exclusive telomerase activator. We measured temperature, pH and dosage of enzyme using a single-factor experiment in ASI biotransformation. After optimization, the optimal reaction conditions were as follows: 75°C, pH 5.5, 1 U of Dth3 and 0.2 U of Xln-DT, respectively. Under the optimized conditions, 1 g/l ASI was transformed into 0.63 g/l CAG with a corresponding molar conversion of 94.5% within 3 h. This is the first report to use the purified thermostable and sugar-tolerant enzymes from Dictyoglomus thermophilum to hydrolyze ASI synergistically, which provides a specific, environment-friendly and cost-effective way to produce CAG.

To efficiently recycle GH78 thermostable rhamnosidase (TpeRha) and easily separate it from the reaction mixture and furtherly improve the enzyme properties, the magnetic particle Fe

β-Glucosidases and β-xylosidases are two categories of enzymes that could cleave out nonreducing, terminal β-D-glucosyl and β-D-xylosyl residues with release of D-glucose and Dxylose, respectively. In this paper, two functional β-glucosidase Dth3 and β-xylosidase Xln-DT from

It has been previously demonstrated that laccases exhibit great potential for use in several industrial and environmental applications. In this paper, two laccase isoenzyme genes, lccB and lccC, were cloned and expressed in Pichia pastoris GS115. The sequence analysis indicated that the lccB and lccC genes consisted of 1,563 and 1,584 bp, and their open reading frames encoded 520 and 527 amino acids, respectively. They had 72.7% degree of identity in nucleotides and 86.7% in amino acids. The expression levels of LccB and LccC were up to 32,479 and 34,231 U/l, respectively. The recombinant laccases were purified by ultrafiltration and (NH4)2SO4 precipitation, showing a single band on SDS-PAGE, which had a molecular mass of 58 kDa. The optimal pH and temperature for LccB were 2.0 and 55°C with 2,2'-azino-bis-[3-ethylbenzthiazolinesulfonic acid (ABTS) as a substrate, whereas LccC exhibited optimal pH and temperature at 3.0 and 60°C. The apparent kinetic parameters of LccB were 0.43 mM for ABTS with a Vmax value of 51.28 U/mg, and the Km and Vmax values for LccC were 0.29 mM and 62.89 U/mg. The recombinant laccases were able to decolorize five types of dyes. Acid Violet 43 (100 g/ml) was completely decolorized by LccB or LccC (2 U/ml), and the decolorization of Reactive Blue KN-R (100 g/ml) was 91.6% by LccC (2 U/ml). Thus, the study characterizes useful laccase isoenzymes from T. versicolor that have the capability of being incorporated into the treatment of similar azo and anthraquinone dyes from dyeing industries.

The recombinant strain P. pastoris GS115-lccC was used to produce laccase with high activity. Factors influencing laccase expression, such as pH, methanol concentration, copper concentration, peptone concentration, shaker rotate speed, and medium volume were investigated. Under the optimal conditions, laccase activity reached 12,344 U/L on day 15. The recombinant enzyme was purified by precipitating and dialyzing to electrophoretic homogeneity, and was estimated to have a molecular mass of about 58 kDa. When guaiacol was the substrate, the laccase showed the highest activity at pH 5.0 and was stable when the pH was 4.5~6.0. The optimal temperature for the laccase to oxidize guaiacol was 60°C, but it was not stable at high temperature. The enzyme could remain stable at 30°C for 5 days. The recombinant laccase was used to degrade chlorpyrifos in several laccase/mediator systems. Among three synthetic mediators (ABTS, HBT, VA) and three natural mediators (vanillin, 2,6-DMP, and guaiacol), vanillin showed the most enhancement on degradation of chlorpyrifos. Both laccase and vanillin were responsible for the degradation of chlorpyrifos. A higher dosage of vanillin may promote a higher level of degradation of chlorpyrifos, and the 2-step addition of vanillin led to 98% chlorpyrifos degradation. The degradation of chlorpyrifos was faster in the L/V system (kobs = 0.151) than that in the buffer solution (kobs = 0.028).

In an attempt to shift the optimal pH of the xylanase B (XynB) from Aspergillus niger towards alkalinity, target mutation sites were selected by alignment between Aspergillus niger xylanase B and other xylanases that have alkalophilic pH optima that highlight charged residues in the eight-residues-longer loop in the alkalophilic xylanase. Multiple engineered XynB mutants were created by site-directed mutagenesis with substitutions Q164K and Q164K+D117N. The variant XynB-117 had the highest optimum pH (at 5.5), which corresponded to a basic 0.5 pH unit shift when compared with the wild-type enzyme. However, the optimal pH of the XynB- 164 mutation was not changed, similar to the wild type. These results suggest that the residues at positions 164 and 117 in the eight-residues-longer loop and the cleft's edge are important in determining the pH optima of XynB from Aspergillus niger.