Search

RecA protein plays a principal role in bacterial SOS response to DNA damage. The induction of the SOS response is well understood and involves the cleavage of the LexA repressor catalyzed by the RecA nucleoprotein filament. In contrast, our understanding of the regulation and termination of the SOS response is much more limited. RecX and DinI are two major regulators of RecA's ability to promote LexA cleavage and strand exchange reaction, and are believed to modulate its activity in ongoing SOS events. DinI's function in the SOS response remains controversial, since its interaction with the RecA filament is concentration dependent and may result in either stabilization or depolymerization of the filament. The 17 C-terminal residues of RecA modulate the interaction between DinI and RecA. We demonstrate that DinI binds to the active RecA filament in two distinct structural modes. In the first mode, DinI binds to the C-terminus of a RecA protomer. In the second mode, DinI resides deeply in the groove of the RecA filament, with its negatively charged C-terminal helix proximal to the L2 loop of RecA. The deletion of the 17 C-terminal residues of RecA favors the second mode of binding. We suggest that the negatively charged C-terminus of RecA prevents DinI from entering the groove and protects the RecA filament from depolymerization. Polymorphic binding of DinI to RecA filaments implies an even more complex role of DinI in the bacterial SOS response., (Published by Elsevier Ltd.)

On linear single-stranded DNA, RecA filaments assemble and disassemble in the 5' to 3' direction. Monomers (or other units) associate at one end and dissociate from the other. ATP hydrolysis occurs throughout the filament. Dissociation can result when ATP is hydrolyzed by the monomer at the disassembly end. We have developed a comprehensive model for the end-dependent filament disassembly process. The model accounts not only for disassembly, but also for the limited reassembly that occurs as DNA is vacated by disassembling filaments. The overall process can be monitored quantitatively by following the resulting decline in DNA-dependent ATP hydrolysis. The rate of disassembly is highly pH dependent, being negligible at pH 6 and reaching a maximum at pH values above 7. 5. The rate of disassembly is not significantly affected by the concentration of free RecA protein within the experimental uncertainty. For filaments on single-stranded DNA, the monomer kcat for ATP hydrolysis is 30 min-1, and disassembly proceeds at a maximum rate of 60-70 monomers per minute per filament end. The latter rate is that predicted if the ATP hydrolytic cycles of adjacent monomers are not coupled in any way., (Copyright 1999 Academic Press.)

RecA protein filaments formed on circular (ssDNA) in the presence of ssDNA binding protein (SSB) are generally stable as long as ATP is regenerated. On linear ssDNA, stable RecA filaments are believed to be formed by nucleation at random sites on the DNA followed by filament extension in the 5' to 3' direction. This view must now be enlarged as we demonstrate that RecA filaments formed on linear ssDNA are subject to a previously undetected end-dependent disassembly process. RecA protein slowly dissociates from one filament end and is replaced by SSB. The results are most consistent with disassembly from the filament end nearest the 5' end of the DNA. The bound SSB prevents re-formation of the RecA filaments, rendering the dissociation largely irreversible. The dissociation requires ATP hydrolysis. Disassembly is not observed when the pH is lowered to 6.3 or when dATP replaces ATP. Disassembly is not observed even with ATP when both the RecO and RecR proteins are present in the initial reaction mixture. When the RecO and RecR proteins are added after most of the RecA protein has already dissociated, RecA protein filaments re-form after a short lag. The newly formed filaments contain an amount of RecA protein and exhibit an ATP hydrolysis rate comparable to that observed when the RecO and RecR proteins are included in the initial reaction mixture. The RecO and RecR proteins thereby stabilize RecA filaments even at the 5' ends of ssDNA, a fact which should affect the recombination potential of 5' ends relative to 3' ends. The location and length of RecA filaments involved in recombinational DNA repair is dictated by both the assembly and disassembly processes, as well as by the presence or absence of a variety of other proteins that can modulate either process.

A recA mutant (recA423; Arg169-->His), with properties that should help clarify the relationship between the biochemical properties of RecA protein and its two major functions, homologous genetic recombination and recombinational DNA repair, has been isolated. The mutant has been characterized in vivo and the purified RecA423 protein has been studied in vitro. The recA423 cells are nearly as proficient in conjugational recombination, transductional recombination, and recombination of lambda red- gam- phage as wild-type cells. At the same time, the mutant cells are deficient for intra-chromosomal recombination and nearly as sensitive to UV irradiation as a recA deletion strain. The cells are proficient in SOS induction, and results indicate the defect involves the capacity of RecA protein to participate directly in recombinational DNA repair. In vitro, the RecA423 protein binds to single-stranded DNA slowly, with an associated decline in the ATP hydrolytic activity. The RecA423 protein promoted a limited DNA strand exchange reaction when the DNA substrates were homologous, but no bypass of a short heterologous insert in the duplex DNA substrate was observed. These results indicate that poor binding to DNA and low ATP hydrolysis activity can selectively compromise certain functions of RecA protein. The RecA423 protein can promote recombination between homologous DNAs during Hfr crosses, indicating that the biochemical requirements for such genetic exchanges are minimal. However, the deficiencies in recombinational DNA repair suggest that the biochemical requirements for this function are more exacting.

We characterize aspects of the conformation and dynamic state of RecA filaments when bound to dsDNA that are specifically linked to the presence of the second of the two bound DNA strands. Filaments bound to dsDNA exhibit a facile exchange between free and bound RecA monomers or oligomers in the filament interior that is not seen on ssDNA. The RecA mutant K72R, which binds but does not hydrolyze ATP, forms mixed filaments with wild type RecA protein under some conditions. In the presence of dATP, mixed filaments are formed on dsDNA or ssDNA in which the RecA K72R content approximately reflects the proportion of the K72R mutant in the total RecA protein present when the filament is formed. In the presence of ATP, mixed filaments are formed on dsDNA, but the mutant protein strongly inhibits the binding of wtRecA protein to single-stranded DNA. When RecA K72R is added to pre-formed filaments containing only wild-type RecA protein on single-stranded DNA, little of the mutant protein exchanges into the filament. Exchange occurs readily, however, when the filament is bound to double-stranded DNA. The presence of a second DNA strand in RecA-dsDNA filaments produces as altered and more dynamic filament state relative to filaments formed on single-stranded DNA. The results point to a substantial alteration in filament state when synapsis occurs during RecA protein-mediated DNA strand exchange.

recA protein forms stable filaments on duplex DNA at low pH. When the pH is shifted above 6.8, recA protein remains stably bound to nicked circular DNA, but not to linear DNA. Dissociation of recA protein from linear duplex DNA proceeds to a non-zero endpoint. The kinetics and final extent of dissociation vary with several experimental parameters. The instability on linear DNA is most readily explained by a progressive unidirectional dissociation of recA protein from one end of the filament. Dissociation of recA protein from random points in the filament is eliminated as a possible mechanism by several observations: (1) the requirement for a free end; (2) the inverse and linear dependence of the rate of dissociation on DNA length (at constant DNA base-pair concentration); and (3) the kinetics of exposure of a restriction endonuclease site in the middle of the DNA. Evidence against another possible mechanism, ATP-mediated translocation of the filament along the DNA, is provided by a novel effect of the non-hydrolyzable ATP analog, ATP gamma S, which generally induces recA protein to bind any DNA tightly and completely inhibits ATP hydrolysis. We find that very low, sub-saturating levels of ATP gamma S completely stabilize the filament, while most of the ATP hydrolysis continues. If these levels of ATP gamma S are introduced after dissociation has commenced, further dissociation is blocked, but re-association does not occur. These observations are inconsistent with movement of recA protein along DNA that is tightly coupled to ATP hydrolysis. The recA nucleoprotein filament is polar and the protein binds the two strands asymmetrically, polymerizing mainly in the 5' to 3' direction on the initiating strand of a single-stranded DNA tailed duplex molecule. A model consistent with these results is presented.

A method is described for the accurate determination of the superhelical density (omega) of highly underwound circular DNA molecules. Using this method, duplex DNA bound by RecA protein in the presence of ATP at pH 7.5 is found to be underwound by 39.6% (omega = -0.396), corresponding to a helical periodicity of 17.4 base-pairs per turn. The underwinding is increased to 41% (17.9 base-pairs per turn) in the presence of low levels of ATP gamma S, in good agreement with the 18.6 base-pairs per turn reported previously. In spite of the extensive underwinding, the distribution of DNA topoisomers produced by RecA protein binding is small. This indicates a high degree of structural uniformity among RecA-double-stranded DNA complexes in the presence of ATP.

RecA protein binding to duplex DNA occurs by a multi-step process. The tau analysis, originally developed to examine the binding of RNA polymerase to promoter DNA, is adapted here to study two kinetically distinguishable reaction segments of RecA-double stranded (ds) DNA complex formation in greater detail. One, which is probably a rapid preequilibrium in which RecA protein binds weakly to native dsDNA, is found to have the following properties: (1) a sensitivity to pH, involving a net release of approximately one proton; (2) a sensitivity to salts; (3) little or no dependence on temperature; (4) little or no dependence on DNA length. The second reaction segment, the rate-limiting nucleation of nucleoprotein filament formation accompanied by partial DNA unwinding, is found to have the following properties: (1) a sensitivity to pH, involving a net uptake of approximately three protons; (2) a sensitivity to salts; (3) a relatively large dependence on temperature, with an Arrhenius activation energy of 39 kcal mol(-1); (4) a sensitivity to DNA topology; (5) a dependence on DNA length. These results contribute to a general mechanism for RecA protein binding to duplex DNA, which can provide a rationale for the apparent preferential binding to altered DNA structures such as pyrimidine dimers and Z-DNA.

The 2 mu plasmid of the yeast Saccharomyces cerevisiae encodes a site-specific recombination system consisting of the FLP protein and two inverted recombination sites on the plasmid. The minimal fully functional substrate for in-vitro recombination in this system consists of two FLP protein binding sites separated by an eight base-pair spacer sequence. We have used site-directed mutagenesis to generate every possible mutation (36 in all) within 11 base-pairs of one FLP protein binding site and the base-pair immediately flanking it. The base-pairs within the binding site can be separated into three classes on the basis of these results. Thirty of the 36 sequence changes, including all three at seven different positions (class I) produce a negligible or modest effect on FLP protein-promoted recombination. In particular, most transition mutations are well-tolerated in this system. In only one case do all three possible mutations produce large effects (class II). At three positions, clustered near the site at which DNA is cleaved by FLP protein, one of the two possible transversions produces a large effect on recombination, while the other two changes produce modest effects (class III). For seven mutants for which FLP protein binding was measured, a direct correlation between decreases in recombination activity and in binding was observed. Positive effects on the reaction potential of mutant sites are observed when the other FLP binding site in a single recombination site is unaltered or when the second recombination site in a reaction is wild-type. This suggests a functional interaction between FLP binding sites both in cis and in trans. When two mutant recombination sites (each with 1 altered FLP binding site) are recombined, the relative orientation of the mutations (parallel or antiparallel) has no effect on the result. These results provide an extensive substrate catalog to complement future studies in this system.