Search

This 1-year prospective study evaluated horizontal and vertical facial gingival tissue changes after immediate implant placement and provisionalization (IIPP) with and without bone graft in the implant-socket gap (ISG). During IIPP, 10 patients received bone graft material in the ISG (G group), while the other 10 patients did not (NG group). The implants were evaluated for implant stability quotient (ISQ), modified plaque index (mPI), modified bleeding index (mBI), marginal bone level (MBL), facial gingival level (FGL), and facial gingival profile (FGP) changes. The mean ISQ value at 9-month follow-up was statistically significantly greater than on the day of implant surgery (P < .05). The mPI and mBI scores demonstrated that patients were able to maintain a good level of hygiene. There were no statistically significant differences in the mean MBL changes between the G and NG groups (P > .05). There were statistically significant differences in FGL changes between the G (-0.77 mm) and NG (-1.35 mm) groups (P = .035). There were no statistically significant differences in FGP changes between the G and NG groups (P > .05). However, statistically significant differences were noted in FGP change between the 3–12 and 0–12 month intervals in both groups (P < .05). Within the limitations of this study, although no significant differences were noted in FGP changes between groups, G group experienced significantly less FGL changes than NG group. Bone graft material placement into ISG seems to be advantageous for tissue preservation during IIPP. However, future long-term studies, with larger sample size, are needed to validate the efficacy of such procedure

Made available in DSpace on 2020-12-12T02:04:58Z (GMT). No. of bitstreams: 0 Previous issue date: 2020-04-01 The present study describes a clinical case in which the buccal fat pad (BFP) was used to improve the contour of the peri-implant mucosa. To our knowledge, this is the first case report of such an application in the literature. A 58-year-old woman presented with teeth #2 and #3 missing and an indication for extraction of tooth #4. After clinical examination and CBCT analysis, immediate implants were placed in the region of the extracted tooth and that of tooth #2 for prosthetic rehabilitation using a three-unit fixed partial denture. There was an extensive mucosal defect in the region of tooth #3, with vertical and horizontal changes in the contour of the mucosa. As an alternative to the use of a subepithelial connective tissue graft, we opted for displacement of the BFP and its accommodation on the alveolar ridge of tooth #3 to improve the buccal tissue contour. After 5 years of follow-up, satisfactory gain and maintenance of mucosal volume were observed in the treated area, as well as improvement of buccal tissue contour. The use of BFP seems to be a feasible alternative for filling and treating peri-implant mucosal defects. Diagnosis and Surgery Department São Paulo State University UNESP Institute of Science and Technology of São José dos Campos Restorative Dentistry Department São Paulo State University UNESP Institute of Science and Technology of São José dos Campos Diagnosis and Surgery Department São Paulo State University UNESP Institute of Science and Technology of São José dos Campos Restorative Dentistry Department São Paulo State University UNESP Institute of Science and Technology of São José dos Campos

Deficient bone volume, anatomical limitations, lack of available mesiodistal space, adjacent teeth angulations, and surgical errors may lead to placement of narrow diameter implants. In such a scenario, functional and esthetic—yet sustainable—replacement of more than one missing tooth becomes quite challenging. This article describes the successful restoration of missing both mandibular central incisors on one 3-mm single-piece implant in 3 patients. Despite being a biomechanically complex presentation, the objectives of optimal outcome were achieved in all 3 patients by means of innovative design, fine control of occlusal factors, and correct choice of restorative material. Until the last follow-up at 5 years, no implant or prostheses loss was experienced.

A technique is described where the tooth's natural crown is used as part of the interim implant supported prosthesis in clinical situations where a tooth with poor prognosis is extracted and an implant is placed immediately after tooth extraction. A preliminary impression is made before tooth extraction, and the exact tooth positioning is assessed in the laboratory as part of the treatment plan. An acrylic resin repositioning jig is fabricated that will guide the clinician in seating and orienting the crown intraorally after implant placement is completed. After the natural tooth is extracted and an implant is immediately placed via guided approach, the extracted natural crown is hollowed and placed on top of an interim abutment. The natural crown is positioned intraorally by using the acrylic resin repositioning jig. The crown is then internally relined and placed as part of the interim implant supported prosthesis. After osseointegration has been confirmed, a definitive prosthesis is placed.

Achieving excellence in anterior rehabilitations requires close cooperation between the periodontist and the prosthodontist. Many techniques can be used to restore the lost alveolar hard and soft tissues. The more severe the peri-implant defect, the higher the challenge and lower the predictability of the procedure. The present case consists of Seibert Class III with malaligned implants in the esthetic zone resolved with a cost-modified treatment plan to reestablish esthetics in the anterior maxilla using a rotated palatal flap. The vascularized interpositional periosteal connective tissue graft was effective in augmenting the soft tissue in the esthetic zone and remained stable over a 2-year period. Additional long-term clinical studies are necessary to support these results.

This study aimed to evaluate the impact of buccal bone defects and immediate placement on the esthetic outcome of maxillary anterior single-tooth implants. The archives of the Department of Dental Implants & Tissue Regeneration at Hygeia Hospital during a 5-year period (2010–2014) were retrospectively analyzed, in search of patients treated with a single-tooth implant after extraction of a maxillary incisor. The status of the buccal bone plate and the time of implant placement were recorded. The pink esthetic score (PES) of each case was evaluated, with a maximum score of 14. In total, 91 patients were included in the study. The mean PES was 10.5. The outcome was considered satisfactory (PES ≥ 8) in 89% and (almost) perfect (PES ≥ 12) in 35% of the cases. Immediate implant placement had no impact on PES (P > .05), even though it demonstrated slightly greater variability. On the other hand, buccal bone defects had a negative effect on PES (P < .0001). In conclusion, a satisfactory esthetic outcome can be achieved in single-tooth implants in the anterior maxilla. The presence of buccal bone defects is considered a negative prognostic factor, whereas immediate implant placement does not affect the esthetic outcome.

The purpose of this study was to evaluate the esthetic outcome of single-tooth locking taper connection implants placed in the anterior maxilla following a postextractive nonfunctional loading protocol. This preliminary clinical study involving 16 patients evaluated the results of 21 implants placed in areas with high esthetic value. For each implant the pink esthetic score, white esthetic score, cumulative survival rate, and health status of peri-implant tissues were evaluated. The cumulative survival rate was 100% 2 years after prosthetic loading, and the mean total pink esthetic score/white esthetic score was 16.9 ± 1.14 on a maximum value of 20. There was excellent plaque control in all patients, and inflammation indices were within the norm. Within the limits of this study, this immediate nonfunctional loading protocol seems to be a successful procedure esthetically and for the maintenance of peri-implant soft tissues.

A significant vertical space that is corrected with vertical ridge augmentation may necessitate selection of longer abutments, which would lead to an increased vertical cantilever. This study investigated the influence of different abutment collar heights on single-unit dental implant screw-loosening after cyclic loading. Fifteen implant-abutment assemblies each consisted of an internal hexagonal implant were randomly assigned to 3 groups: Group1, consisting of 5 abutments with 1.5 mm gingival height (GH); Group2, 5 abutments with 3.5 mm GH; and Group3, 5 abutments with 5.5 mm GH. Each specimen was mounted in transparent auto-polymerizing acrylic resin block, and the abutment screw was tightened to 35 Ncm with an electric torque wrench. After 5 minutes, initial torque loss (ITL) was recorded for all specimens. Metal crowns were fabricated with 45° occlusal surface and were placed on the abutments. A cyclic load of 75 N and frequency of 1 Hz were applied perpendicular to the long axis of each specimen. After 500 000 cycles, secondary torque loss (STL) was recorded. One-way ANOVA analysis was used to evaluate the effects of abutment collar height before and after cyclic loading. One-way ANOVA showed that ITL among the groups was not significantly different (P = .52), while STL was significantly different among the groups (P = .008). Post-hoc Tukey HSD tests showed that STL values were significantly different between the abutments with 1.5 mm GH (Group1) and with 5.5 mm GH (Group3) (P = .007). A paired comparison t-test showed that cyclic loading significantly influenced the STL in comparison with the ITL in each group. Within the limitations of this study, it can be concluded that increase in height of the abutment collar could adversely affect the torque loss of the abutment screw.

This study explored the necessity of perioperative antibiotics on survival rates of implants immediately placed and provisionalized into sites with infection. Subjects were randomly assigned into antibiotic or placebo groups. Extraction, immediate placement, and provisionalization of an implant were performed. Eight subjects received placebo and five subjects received both a pre- and post-operative antibiotic regimen. One implant from each group failed. Perioperative antibiotic therapy may not be needed in selected immediate implant therapy.

The aim of this single-cohort study was to evaluate clinical survival and success of partial rehabilitation supported by reduced-length implants in maxilla and mandible. Data from 53 short implants placed in 41 patients are presented. Before surgery mean residual bone height was 6.21 ± 1.05 mm in the upper jaw and 10.73 ± 1.63 mm in the mandible. None of the implants failed, and the cumulative survival rate was 100% at 1 year after prosthetic loading. Mean peri-implant bone loss was 0.69 ± 0.24 mm for maxillary implants and 0.73 ± 0.23 mm for mandibular implants, and there was no significant difference between the 2 jaws. No complications were recorded. Despite the limitations of this study concerning study design and sample size, short implants may be considered effective in supporting partial rehabilitation in both maxilla and mandible. More well-designed studies with a larger sample size and longer follow-up are needed to validate the use of short implants.

This study was designed to evaluate laser-sintered early-loaded 1-piece implants (OPI) based on clinical and radiographic findings. Thirty OPI were placed in the mandibular premolar area and subjected to early loading after 3 weeks of initial placement; patients were followed up for 6 months. Clinical evaluation included pocket depth, gingival health, implant stability, and esthetics. Periapical radiographs were used to measure the marginal bone loss (MBL). All implants were considered successful resulting in a survival rate of 100%. A remarkable difference (P < 0.01) existed when comparing MBL levels at 1 month with those at 3 and 6 months. Significant differences (P < 0.01) existed when comparing implant stability at 1 month to 3 months and at 3 months to 6 months. Moreover, significant differences (P < 0.01) were observed when comparing peri-implant probing depth at 1 month to that at 3 and 6 months on both the mesial and distal sides. The mean value of pink esthetic score was 11 at time of final restoration. The laser-treated early-loaded OPI design is associated with satisfactory clinical and radiographic follow-up results and it is a good alternative to the 2-piece design.

Computer-assisted implant planning and subsequent production of a surgical template based on this plan has gained attention because it provides restoratively driven esthetics, patient comfort, satisfaction, and the option of flapless surgery and immediate restoration. However, it adds expense and requires more time. Another significant but not so apparent advantage may be improved survival and success over freehand techniques in types III and IV bone. This retrospective analysis was undertaken to examine that possibility. It reports 1-year outcome for 80 implants in 27 consecutively presenting patients treated over a 7-year period using computer-assisted techniques across all bone qualities in commonly encountered treatment indications in private practice. Implants were placed to support single teeth, small bridges, and complete arch restorations in exposed or immediately restored applications, based on primary stability as determined by insertion torque, resonance frequency analysis, and Periotest. For the 80 implants supporting 35 restorations, the median observation period is 2.66 years; 73 implants supporting prostheses in 22 patients had readable radiographs at 1 year. There was a 1-year overall implant survival and a success rate of 100%. Radiographic analysis demonstrated the change in bone level from the platform at 1-year is less than 2 mm. Intra-operative median measurements of primary stability were insertion torque, 40 Ncm; resonance frequency, 76 ISQ; and Periotest, −3. All intra-operative measurements were consistent for acceptable primary stability regardless of bone density. Restoratively driven diagnosis and precision planning and initial fit were possible with computer-assisted techniques resulting in the achievement of high primary stability, even in areas of less dense bone. The ability to plan implant position, drill sequence, and implant design on the basis of predetermined bone density gives the practitioner enhanced pretreatment information which can lead to improved outcome.

Implant peri-apical lesion (IPL) is a periapical lesion, usually asymptomatic, in which the coronal portion of the implant achieves a normal bone to implant interface. A case of IPL following immediate implant placement and treated with guided bone regeneration (GBR) principles is described. Five-year clinical and radiographic follow-up with cone-beam assessment showed complete healing of the bone. GBR principles applied to IPL could completely solve the lesion.

Dentists have several treatment options when restoring patients with congenitally missing maxillary lateral incisors. Endosseous implant therapy combined with orthodontics can achieve predictable outcomes while meeting patient expectations. This case report exhibits an interdisciplinary approach involving orthodontics, implant surgery, and prosthodontics to resolve this common dental concern.

Minimally invasive surgical implant placement has numerous advantages over conventional open flap technique. A series of cases is described here explaining the use of the tissue punch with discussion of the complications and management.

This case series evaluated the facial gingival stability following single immediate tooth replacement in conjunction with subepithelial connective tissue graft (SCTG). Implant success rate and peri-implant tissue response were also reported. Ten patients (6 male, 4 female), with a mean age of 52.1 (range = 22.7 to 67.1) years, underwent immediate implant placement and provisionalization with SCTG and were evaluated clinically and radiographically at presurgery (T0), at the time of immediate tooth replacement and SCTG (T1), and 3 months (T2), 6 months (T3), and 12 months (T4) after surgery. Data were analyzed using the Friedman and Wilcoxon signed-ranks tests at the significance level of α = .05. At 1 year, 9 of 10 implants remained osseointegrated with the overall mean marginal bone change of −0.31 mm and a mean facial gingival level change of −0.05 mm. The modified plaque index scores showed that patients were able to maintain a good level of hygiene throughout the study. The papilla index score indicated that at T4, more than 50% of the papilla fill was observed in 89% of all sites. When proper 3-dimensional implant position is achieved and bone graft is placed into the implant-socket gap, favorable success rate and peri-implant tissue response of platform switching implants can be achieved following immediate tooth replacement in conjunction with subepithelial connective tissue graft.

Made available in DSpace on 2013-08-12T19:08:15Z (GMT). No. of bitstreams: 0 Previous issue date: 2010-01-01 Made available in DSpace on 2013-09-30T18:29:39Z (GMT). No. of bitstreams: 0 Previous issue date: 2010-01-01 Submitted by Vitor Silverio Rodrigues (vitorsrodrigues@reitoria.unesp.br) on 2014-05-20T13:43:22Z No. of bitstreams: 0 Made available in DSpace on 2014-05-20T13:43:22Z (GMT). No. of bitstreams: 0 Previous issue date: 2010-01-01 The aim of this study was to evaluate the stress distribution of platform switching implants using a photoelastic method. Three models were constructed of the photoelastic resin PL-2, with a single implant and a screw-retained implant-supported prosthesis. These models were Model A, platform 5.0 mm/abutment 4.1 mm; Model B, platform 4.1 mm/abutment 4.1 mm; and Model C, platform 5.00 mm/abutment 5.00 mm. Axial and oblique (45 degrees) loads of 100 N were applied using a Universal Testing Machine (EMIC DL 3000). Images were photographed with a digital camera and visualized with software (AdobePhotoshop) to facilitate the qualitative analysis. The highest stress concentrations were observed at the apical third of the 3 models. With the oblique load, the highest stress concentrations were located at the implant apex, opposite the load application. Stress concentrations decreased in the cervical region of Model A (platform switching), and Models A (platform switching) and C (conventional/wide-diameter) displayed similar stress magnitudes. Finally, Model B (conventional/regular diameter) displayed the highest stress concentrations of the models tested. São Paulo State Univ, Aracatuba Sch Dent, Dept Dent Mat & Prosthodont, São Paulo, Brazil São Paulo State Univ, Aracatuba Sch Dent, Dept Integrated Clin & Surg, São Paulo, Brazil São Paulo State Univ, Aracatuba Sch Dent, Dept Dent Mat & Prosthodont, São Paulo, Brazil São Paulo State Univ, Aracatuba Sch Dent, Dept Integrated Clin & Surg, São Paulo, Brazil

The best possible fit of prosthetic components should be the aim of the clinician. The technical report presented here describes the use of a modified plastic shell technique for modeling a cement-retained single-implant restoration. This approach will help to prevent potential errors caused by the wax modeling technique.

Recently, successful implant placement in fresh extraction sockets has been reported. In this case report, we present the results of an immediate implant placement in a fresh extraction socket of a mandibular molar with simultaneous bone regeneration using a nonresorbable membrane and no other graft materials. Clinical and radiographic findings acquired 8 years after implant placement demonstrated a stable peri-implant situation and confirmed a satisfactory treatment result.

Fracture of the implant is one of the possible complications affecting dental implants; it is a rare event but of great clinical relevance. The aim of the present study was to perform a scanning electron microscopy (SEM) fractography evaluation of 7 International Team for oral Implantology (ITI) hollow implants removed because of fracture. The most common clinical risk factors, such as malocclusion, bruxism, and cantilevers on the prosthesis, were absent. Seven fractured ITI hollow implants were retrieved from 5 patients and were analyzed with the use of SEM. SEM analysis showed typical signs of a cleavage-type fracture. Fractures could be due to an association of multiple factors such as fatigue, inner defects, material electrochemical problems, and tensocorrosion.

Success rates for both periodontal and implant therapy are often dependent on site and tooth type. For periodontally involved mandibular molars, the decision to hemisect or to extract and place an implant is often complicated. The purpose of the present study was to evaluate the outcomes of the aforementioned treatment modalities for mandibular molars in a private practice setting. A retrospective chart review was performed. In one group of patients (n = 32), 56 mandibular first or first and second molars were treated by hemisection (Group H). A second group (n = 28) received 36 implants in the mandible to replace periodontally involved first or first and second molars (Group I). All patients had been in maintenance for at least 4 years after treatment. The occurrence and timing of posttreatment complications were evaluated. Data were analyzed by parametric and nonparametric statistics, as indicated. The majority of hemisected teeth (68% of Group H) and implants (89% of Group I) remained free of complications for the entire observation period. Group H had a greater incidence of overall complications (P = .027) and nonsalvageable complications (P = .013) than Group I. For both groups, the percent CAL loss per year was greater for the teeth/implants that experienced complications than in the those that remained complication free (p

Maxillary alveolar atrophy often limits the placement of dental implants. The bone splitting and bone widening by osteotome technique is a more obvious method for the immediate placement of implants in those cases in which the dimensions of the residual ridge are reduced by only a small degree. Few studies have been performed that are aimed at the radiographic results shown after the osteotome technique by a low-dose computed tomography scan and assessment of objective improvement of the bone density using Misch's classification. The aim of this clinical case was to analyze the radiographic data of the osteotome technique on the change of bone density and to demonstrate efficacy of the ridge expansion crest to bypass bone fenestrations of the buccal plate in the esthetic zone. The advantages of this technique for patients include less surgical trauma and a shorter treatment time.

A two-dimensional finite element analysis was used to evaluate the effects of implant length and diameter on the stress distribution of a single-implant supported crown and the strain distribution of its surrounding bone prior to and after the phase of osseointegration. The effect of length was investigated using implants with a diameter of 3.75 mm and lengths of 8 mm, 10 mm, 12 mm, and 14 mm. The effect of diameter was investigated using implants with a length of 10 mm and diameters of 3 mm, 3.75 mm, 4.5 mm, and 5mm. The phase prior to osseointegration was simulated by assuming a coefficient of friction for the interface between the implant and the surrounding bone, while the phase after osseointegration was simulated by assuming a fixed bond on the interface between the implant and the surrounding bone. The FEA results indicated a tendency towards stress reduction on the implant, both prior to and after osseointegration, when the length was increased. However, the calculated stresses on the implant were lower after the phase of osseointegration. Although no specific correlation could be seen regarding the influence of implant diameter, the calculated stresses on the implant were again lower after the phase of osseointegration. For all these cases, the maximum stress concentration occurred at the abutment-implant interface. As far as bone tissue was concerned, there was a tendency towards strain reduction, before and after osseointegration, when the length of the implant was increased from 10 mm up to 14 mm. This tendency was not manifested for the range of 8 to 10 mm. The effect of implant diameter on bone tissue was not clear. It appears that implants of a diameter more than 5 mm are not preferable for immediate loading. Finally, it seems that cortical bone is not influenced by the phase of osseointegration, while trabecular bone is highly affected.

Dental implant treatment can be complicated with infection. A list of possible causes includes overheating during the osteotomy, bacterial contamination from an adjacent tooth, residual bacteria from the infected tooth that previously occupied the site, bone microfractures from overloading or loading too soon, and residual space left around the implant after it is seated. Most treatments entail surgical debridement of the lesion and chemical detoxification of the apical or exposed portion of the implant surface with citric acid, tetracycline, or chlorhexidine gluconate as well as guided tissue regenerative or guided bone regenerative procedures. This article describes the case of an active labiolateral peri-implantitis from a previous infectious site at tooth 12 in a patient who was a chronic steroid user. The patient was treated with surgical debridement and no implant surface detoxification and regenerative procedures with xenograft of PepGen P-15 and an absorbable collagen membrane. The patient was advised to discontinue steroid therapy. This resulted in resolution of the associated signs and symptoms of infection and new bone formation in the radiograph. The negative effect of corticosteroids on calcium metabolism and bone regeneration is discussed. The potential implications of steroid use for implant dentistry are critically appraised, and guidelines are proposed for pre- and postoperative management that may assist in the successful implant-supported rehabilitation of this patient category.

Esthetic requirements for dental implant restoration have arisen in recent years. Despite several surgical techniques that have been developed, the treatment of the peri-implant soft-tissue defect is still difficult. The purpose of this clinical article is to describe a grafting technique using subepithelial connective tissue grafts to recontour soft-tissue margin discrepancy for single-tooth implant restorations in the anterior maxilla. After 2-year follow-up, this procedure shows that the use of connective tissue grafts can be a predictable approach to establish new and stable peri-implant soft-tissue margin.

The term retrograde peri-implantitis has been commonly used to describe lesions in the periapical region of dental implants. There are very few reports on this condition, and the exact etiology and pathogenesis are subject to speculation. Management of retrograde peri-implantitis is even more scarcely discussed in the literature. The current article briefly reviews the literature on this subject and presents a case report of retrograde peri-implantitis. Special emphasis is placed on the management of the condition, and different strategies are critically evaluated. If the fixture is stable despite bone loss in the periapical region, it is suggested that surgical debridement be carried out with the use of a surface antiseptic like chlorhexidine. Also all possible efforts should be made to prevent damage to the implant surface. Bone loss due to this condition may be regenerated on the basis of the principle of guided bone regeneration.

This paper presents a case of a dentigerous cyst accompanied by a history of inflammation, resorption of the roots of the first molar and the lingual aspect of the distal root of the second molar, and devitalization of the 2 premolars. The treatment option chosen was marsupialization of the cyst, extraction of the involved teeth, endodontic treatment of both premolars, and implant insertion in the area of the first mandibular molar at a later stage. Twelve months postsurgery the area of interest was almost flattened and the radiographic examination revealed total disappearance of the radiolucency. An implant of 15 × 4 mm was inserted in the area of the first mandibular molar. Despite the excellent implant stability achieved, a thin central zone of the defect remained void of bone. After complete excision of soft tissue the defect was filled with an alloplastic bone substitute. Eight months later (20 months postsurgery), the implant was uncovered and the restorative procedure completed. The implant and the crown have been functioning sign and symptom free for 48 months. Marsupialization was preferred instead of enucleation due to (1) proximity of the cyst to the mandibular canal; (2) need for apicectomy of both premolars to gain good access for enucleation; (3) refusal of the patient to undergo a second surgery for bone harvesting; (4) lower probability for postoperative contamination; (5) need of small quantity of bone substitute; (6) easier extraction of the impacted second molar due to its coronal movement. The disadvantages of the treatment were the long healing period and the discomfort of the patient at the early stages of marsupialization. It was judged that the advantages outweighed the disadvantages in this case. We discuss the findings of other authors who support the conservative approach to jaw cysts in a young population, and the concerns that exist in the literature about the ability of osseoconductive graft materials to generate vital bone and achieve implant-to-bone contact.

Replacing the missing maxillary anterior teeth with dental implants and maintaining the soft tissue structure and alveolar profile is an esthetic challenge for the restorative dentist. This clinical report describes the immediate provisional placement and prosthetic rehabilitation of 2 missing maxillary central incisors with scalloped dental implants.

This study reports on the first longitudinal results of an alumina (70%)-zirconia (30%) ceramic restorative system for implant-supported, single-tooth replacement in the anterior maxillary jaw. Eighteen patients (9 men, 9 women, mean age = 42.4 years) were treated with 22 implants placed into 19 extraction sockets and 3 residual ridges. Eight implants were immediately loaded with nonoccluding provisional prostheses. All implants were definitively loaded with fully occluding ceramic restorations after osseointegration and soft tissue maturation. Patients were monitored from 7 to 30 months (mean = 18.1 months) after loading. All implants osseointegrated and were successfully restored. One case of abutment screw loosening occurred because of patient parafunction (bruxing), and another patient reported chewing pain attributed to malocclusion. Both problems were successfully resolved without further incidence. Within the context of this study, single-tooth replacement in the anterior maxillary jaw was successfully achieved with alumina-zirconia ceramic single-tooth restorations with up to 30 months of clinical function.

Computerized tomography (CT)-based dental imaging for implant planning and surgical guidance carries both restorative information for implant positioning, as far as trajectory and distribution, and radiographic information, as far as depth and proximity to critical anatomic landmarks such as the mandibular canal, maxillary sinus, and adjacent teeth. This case report describes a systematic approach to the planning and surgical placement of a single implant-supported crown, utilizing CT-based dental imaging for implant planning and surgical guidance. The simple steps result in the accurate transfer of critical radiographic information to the surgical site.

Osteotome sinus floor augmentation is a simple and conservative technique to increase the bone height on the sinus floor. In this report, a patient with a bone height of 5 to 6 mm in the extracted site of #3 was simultaneously treated with the osteotome sinus floor elevation technique and nonsubmerged implant placement. At 1-year follow-up, the entire length of the 10-mm-long implant was covered with new bone and the implant was solid and functional.

An implant screw fracture is one of the common problems associated with the implant components. In some situations, it may not be possible to retrieve the fractured implant screws. As a result, clinicians either remove the implant or the implant may need to be covered over with soft tissue. The salvage of an implant with a nonretrievable screw fragment may be highly beneficial to the patients. This report describes a technique to salvage an implant-supported single restoration that has a nonretrievable implant screw fragment.

A dental implant surgical technique is described including a 12-mm fold-over of a facial flap and coapting the internal side of the folded flap with a 4-0 suture. The flap is pulled against a provisional crown with a sling-type suture during the implant uncovery stage and may decrease the risk for a poor esthetic facial gingival architectural outcome.

Dental implants and their successful long-term results have begun a new era in dentistry. In recent years, the increasing trend of using dental implants at single-tooth edentulous cases has been taken into consideration. Although treatment goals and objectives are similar for both prosthodontists and orthodontists, they rarely cooperate. Usually prosthodontists are in need of preprosthodontic orthodontic preparations for younger patients. In this paper, different preprosthodontic orthodontic procedures that may be required before the placement of implants at single-tooth edentulous cases are presented. In the first and second cases, decreased mesio-distal space was regained by different orthodontic treatment methods, whereas the occlusal relationship was corrected for better function in the third case.