Search

Background: This study was conducted to measure the effect of different drilling depths on compression forces generated by two commonly used headless compression screws using the two different types of drill bit, the Acutrak® mini (conical type drill bit) and the Synthes 3.0 HCS® (cylindrical type drill bit)., Methods: A load cell was placed between two Sawbone blocks, which were 12 mm and 40 mm in thickness, respectively. After placing the guide pin into the center of the block, the drilling depth of the Acutrak® mini and Synthes HCS® screws ranged from 16 to 28 mm and 22 to 28 mm, respectively. The 24-mm screws were inserted and the compression force was measured immediately and at 30 min post-insertion., Results: The Acutrak® mini generated greater compression force compared to the Synthes 3.0 HCS® when drilled to a depth of less than 24 mm. The compression force of the Acutrak® mini showed a strong inverse correlation with the drilling depth. There was no significant inverse correlation observed between the compression force of the Synthes HCS® and the drilling depth., Conclusions: If the screw length and the drill depth are the same, the Synthes 3.0 HCS® (cylindrical type drill bit) is safer and easier to use as it has no change in the compression force even when over-drilling because the compression force of the two screws is similar. As for the Acutrak® mini (conical type drill bit), while it is technically demanding due to varying compression force according to the drill depth, it can be used in certain cases because it can give stronger compression force through under-drilling.

Background: The objectives of the present study were to compare changes in muscle excursion, total collagen, and collagen subtypes after tenotomy over time and after delayed tendon repair., Methods: Tenotomy on the extensor digitorum tendon of the right second toes of 48 New Zealand White rabbits was performed; toes on the left leg were used as controls. Passive muscle excursion, total collagen content, and type I, III, and IV collagen contents were measured at 1, 2, 4, and 6 weeks after tenotomy. Next, passive muscle excursion and total collagen content were measured at 8 weeks after delayed tendon repair at 1, 2, 4, and 6 weeks after a tenotomy., Results: Passive muscle excursion decreased sequentially over time after tenotomy. Meanwhile, total collagen increased over time. These changes were significant after 4 weeks of injury. Type I collagen significantly increased, type III collagen significantly decreased, and type IV collagen had no significant change over time. Passive muscle excursion was negatively correlated with total collagen and type I collagen after tenotomy at each time point after tenotomy (p < 0.05). After tendon repair, increases in total collagen content after tenotomy were not reversed, despite early repairs at 1 and 2 weeks after tenotomy., Conclusions: Increases in type I collagen were found to be associated with decreased excursion after tendon rupture. The increase in collagen that was observed after tenotomy was not reversed by repair within 8 weeks.

Objective: The purpose of this study was to compare the clinical outcomes of ulnar nerve stability-based surgery via a small incision with those of classic anterior transposition of the ulnar nerve for cubital tunnel syndrome., Methods: From March 2008 to December 2013, 107 patients with cubital tunnel syndrome underwent simple decompression or anterior transposition via a small incision, according to an ulnar nerve stability-based decision based on an assessment of intraoperative ulnar nerve stability (group A, n = 51), or anterior transposition via a classic incision (group B, n = 56). Clinical outcome was assessed using grip and pinch strength, two-point discrimination, the mean of the disabilities of arm, shoulder, and hand (DASH) survey, and the modified Bishop scale., Results: At the final follow-up, all outcome measures improved significantly in both groups and there were no significant differences between the two groups. However, there were fewer operation-related complications in group A (one revision surgery) than in group B (one superficial infection, two painful scars, and five cases of numbness at the medial elbow)., Conclusions: Outcomes after the ulnar nerve stability-based approach and anterior transposition were similar, although more patients experienced operation-related complications after anterior transposition via a classic incision. Making an ulnar nerve stability-based decision to perform either simple decompression or anterior transposition via a small incision seems to be a better strategy for patients with cubital tunnel syndrome.