Search

A wet-chemistry strategy is proposed for fabricating Au nanofilms on IR transparent Si with controlled particle sizes and spatial distribution. The apparent surface enhancement factor increases with increasing sizes and/or contact and the severe aggregation of Au nanoparticles might cause the bipolar band shape.

A cheap and reproducible wet process, the seeded growth approach to fabricate Ag nanofilms on Si for electrochemical ATR-surface enhanced IR absorption spectroscopy (SEIRAS) application, is described. Conductive, adhesive and SEIRA-active Ag nanofilms were acquired with subsequent chemical plating in a modified Ag-mirror reaction and pyridine was found to bind via its N end to the Ag electrode.

A ubiquitous two-step wet process is presented, which is an economical and easy method to prepare nanofilms of Pt group metals for electrochemical attenuated total reflection-surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) application. The high detection limit of SEIRAS and the ATR configuration facilitates the simultaneous monitoring and analysis of molecular adsorption and reaction at these Pt group metals.

Ag nanoparticle films (simplified as nanofilms hereafter) on Si for electrochemical ATR surface enhanced IR absorption spectroscopy (ATR-SEIRAS) have been successfully fabricated by using chemical deposition, which incorporates initial embedding of Ag seeds on the reflecting plane of an ATR Si prism and subsequent chemical plating of conductive and SEIRA-active Ag nanofilms. Two alternative methods for embedding initial Ag seeds have been developed: one is based on self-assembly of Ag colloids on an aminosilanized Si surface, whereas the other the reduction of Ag+ in a HF-containing solution. A modified silver-mirror reaction was employed for further growth of Ag seeds into Ag nanofilm electrodes with a theoretically average thickness of 40-50 nm. Both Ag seeds and as-deposited Ag nanofilms display island structure morphologies facilitating SEIRA, as revealed by AFM imaging. The cyclic voltammetric feature of the as-prepared Ag nanofilm electrodes is close to that of a polycrystalline bulk Ag electrode. With thiocyanate as a surface probe, enhancement factors of ca. 50-80 were estimated for the as-deposited Ag nanofilms as compared to a mechanically polished Ag electrode in the conventional IRAS after reasonable calibration of surface roughness factor, incident angles, surface coverage, and polarization states. As a preliminary example for extended application, the pyridine adsorption configuration at an as-deposited Ag electrode was re-examined by ATR-SEIRAS. The results revealed that pyridine molecules are bound via N end to the Ag electrode with its ring plane perpendicular or slightly tilted to the local surface without rotating its C2 axis about the surface normal, consistent with the conclusion drawn by SERS in the literature.

Surface-enhanced infrared absorption spectroscopy (SEIRAS) in the attenuated-total-reflection configuration (ATR-SEIRAS) has been applied for the first time to Ni electrodes. SEIRA-active Ni electrodes were obtained through initial chemical deposition of a 60-nm-thick Au underlayer on the reflecting plane of an ATR Si prism followed by potentiostatic electrodeposition of a 40-nm-thick Ni overlayer in a modified Watt's electrolyte. The Ni nanoparticle film thus obtained exhibited exceptionally enhanced IR absorption for the surface probe molecule CO while maintaining unipolar and normally directed bands. With the advantages of ATR-SEIRAS, free H2O molecules coadsorbed with CO at the Ni electrode were revealed, and their role in the electrooxidation of the CO adlayer at the Ni electrode is discussed. In addition, the conversion of bridge to linearly bonded CO at Ni electrode in a neutral solution was clearly identified upon electrooxidation of the CO adlayer. ATR-SEIRAS was also used to characterize the adsorption configuration of a pyridine adlayer at the Ni electrode. Both A1 and B1 modes of adsorbed pyridine were detected with comparably large intensities, essentially maintaining the spectral feature of pyridine molecules rather than that of "alpha-pyridyl species", which strongly suggests an "edge-tilted pyridine" configuration present at the Ni electrode, a configuration intermediate between the "end-on pyridine" and "edge-on alpha-pyridyl" adsorption modes reported in the literature.

Au colloids were used to fabricate nanoscale-tunable Au nanofilms on silicon for surface-enhanced IR absorption bases in both ambient and electrochemical environments. This wet process incorporates the self-assembly of colloidal Au monolayer using 3-aminopropyl trimethoxysilane as the organic coupler with subsequent chemical plating in an Au(III)/hydroxylamine solution. FTIR spectroscopy in transmission mode of the probe species SCN- was used to evaluate the apparent surface enhancement in IR absorption of 2D Au colloid arrays and chemically plated Au particles. The nanostructure of Au films was examined by atomic force microscopy. The IR and AFM results show that the apparent surface enhancement factor (1-2 orders of magnitude) increases with increasing sizes and/or contact, and the severe aggregation of Au nanoparticles may cause the bipolar band shape. Cyclic voltammetry on the Au nanofilm obtained by the above nucleation and growth strategy exhibits a feasible electrochemical stability and behavior. In situ ATR-FTIR measurement of p-nitrobenzoic acid adsorption demonstrates that the as-grown Au film yields rather promising surface enhancement as well.