Search

This paper proposes increasing the width of the discharge channel to improve the specific impulse of Hall thrusters. In our study, we significantly increased the achievable channel width by optimizing the magnetic circuit topology, and the design freedom of the Hall thruster was improved. A prototype of a wide-channel high-specific-impulse Hall thruster was designed and experimentally verified. The effects of channel width on the discharge process and the characteristics of an aft-loaded magnetic field Hall thruster were investigated. The high-intensity luminous region did not diffuse radially with an increase in the channel width, and the plasma was always concentrated near the channel centerline. A wider channel is more conducive for improving the propellant utilization efficiency, thereby effectively improving the specific impulse of the Hall thruster. By optimizing the discharge channel width, the upper limit of the discharge voltage was increased, and the maximum specific impulse was increased from 3170 to 3794 s, a relative improvement of 20%. The effect of the specific impulse improvement at the same discharge voltage was analyzed and discussed. The results of this study are significant for the design of high-specific-impulse Hall thrusters. [ABSTRACT FROM AUTHOR]

In this paper, the relationship between the morphology of the cathode crater and plasma ionization between thrusters is studied by adjusting the input energy of the micro-cathode arc thruster (μ CAT). We monitor the morphology of the cathode crater of the μ CAT using scanning electron microscopy and explore the relationship between the crater morphology and the internal energy loss of the cathode crater. This relationship, combined with the numerical simulation results, is used to monitor the ionization between the electrodes of the μ CAT using an enhanced intensified charge coupled device spectrum detector. The effect of cathode crater morphology on the ionization of the propellant during the operation of the μ CAT is determined. The results show that with a change in the input power processing unit voltage, the external profile and depth-to-diameter ratio of the cathode crater change, resulting in a change in the internal energy loss of the thruster cathode crater and then affecting the ionization efficiency of the cathode working fluid in the μ CAT. Under the condition of basically unchanged cathode feed energy flow density, reasonable adjustment of the depth-to-diameter ratio of the cathode crater can effectively improve the ionization efficiency of the cathode working fluid in the μ CAT. [ABSTRACT FROM AUTHOR]