Search

Abstract: Li2Ti6O13 has been prepared from Na2Ti6O13 by Li ion exchange in molten LiNO3 at 325°C. Chemical analysis and powder X-ray diffraction study of the reaction product respectively indicate that total Na/Li exchange takes place and the Ti–O framework of the Na2Ti6O13 parent structure is kept under those experimental conditions. Therefore, Li2Ti6O13 has been obtained with the mentioned parent structure. An important change is that particle size is decreased significantly which is favoring lithium insertion. Electrochemical study shows that Li2Ti6O13 inserts ca. 5 Li per formula unit in the voltage range 1.5–1.0V vs. Li+/Li, yielding a specific discharge capacity of 250mAhg−1 under equilibrium conditions. Insertion occurs at an average equilibrium voltage of 1.5V which is observed for oxides and titanates where Ti(IV)/Ti(III) is the active redox couple. However, a capacity loss of ca. 30% is observed due to a phase transformation occurring during the first discharge. After the first redox cycle a high reversible capacity is obtained (ca. 160mAhg−1 at C/12) and retained upon cycling. Taking into consideration these results, we propose Li2Ti6O13 as an interesting material to be further investigated as the anode of lithium ion batteries. [ABSTRACT FROM AUTHOR]

Abstract: The α-polymorph of Li3FeF6 has been obtained at room temperature by a precipitation reaction from aqueous solution. This easy procedure that does not require any further annealing at high temperature yields a white powder with particles sizes ranging from 250 to 400nm. After proper processing by mechanical milling, particle sizes clearly below 100nm are achieved and this fluoride reacts reversibly with lithium at an average voltage of 3.1V, which is expected for the Fe3+/Fe2+ redox couple. After 12h of ball milling observed average particle size is ca. 50nm and a reversible capacity of 100mAhg−1 is obtained. This corresponds to 70% of the theoretical capacity expected for the one electron reduction of Fe3+. The mentioned capacity is fairly kept upon cycling making the new material useful as the positive electrode in lithium batteries. This is the very first time that a material for cathode application in lithium batteries is prepared at room temperature and from aqueous solution, a procedure which is easily scalable and hence of high industrial interest. [Copyright &y& Elsevier]

Abstract: We present an electrochemical study of BiSbO4, an opened layered oxide having a structure related to Aurivillius phases. Li//BiSbO4 cells show a large specific capacity as high as 1250mAhg−1 during reduction down to 0.5V. This reaction involves 18Li atoms per formula unit, pointing it towards a very promising cathode material for primary lithium batteries, in particular for ICD devices. The characterization of the reduction products indicates that the reduction of BiSbO4 with lithium presumably goes along firstly with the formation of metallic Sb and Bi to follow the formation of the alloys Li3Bi and Li3Sb dispersed in a lithium oxide matrix. In situ X-ray diffraction experiments proved the amorphous nature of both metals and final alloys. On the other hand when Li//BiSbO4 cells are limited to discharge down to 1.2V, BiSbO4 reacts with 5Li atoms. After the first discharge, that develops a specific capacity of 350mAhg−1, high cyclability has been observed. [Copyright &y& Elsevier]

Abstract: Structural evolution during topotactical electrochemical lithium insertion and deinsertion reactions in ramsdellite-like Li x Ti2O4 has been followed by means of in situ X-ray diffraction techniques. The starting Li x Ti2O4 (x =1) exists as a single phase with variable composition which extends in the range 0.50≤ x ≤1.33. However, beyond the lower and upper compositional limits, two other single phases, with ramsdellite-like structure, are detected. The composition of these single phases are: TiO2 upon lithium deinsertion and Li2Ti2O4 upon lithium insertion. Both TiO2 and Li2Ti2O4 are characterized by narrow compositional ranges. The close structural relationship between pristine LiTi2O4 and the inserted and deinserted compounds together with the relative small volume change over the whole insertion–deinsertion range (not more than 1.1% upon reduction) is a guaranty for the high capacity retention after long cycling in lithium batteries. The small changes in cell parameters well reflect the remarkable flexibility of the ramsdellite framework against lithiation and delithiation reactions. [Copyright &y& Elsevier]