Search

This work explores a novel tomographic approach to PGAA that is both quantitative and spatially resolved, adapted from a clinical “proton beam range finder” in which MeV gamma rays are imaged by coincidence measurements of Compton scattered gamma rays with multi-detector arrays. We performed preliminary measurements using a Compton camera made with CdZnTe detector arrays on a series of test samples with high-energy (> 1 MeV) gamma emission lines. 3D image reconstructions were performed on the 2.2 MeV peak from H. The image reconstruction methods were also evaluated using the emission data generated by Monte Carlo simulations under ideal conditions. [ABSTRACT FROM AUTHOR]

In the prompt-gamma activation analysis, the spectra of multi-element metallic samples contain low-energy regions with complicated multiplets that are difficult to evaluate by fitting. This has an impact on the accuracy and precision of the final results. To overcome this, parallel measurements with Compton-suppressed coaxial HPGe and high-resolution, low-energy germanium detectors, with and without Compton-suppression, were completed in order to assess the performances of the setups under controlled conditions. The selectivities, the signal-to-background ratios and other characteristic features of the setups are compared, and the results are discussed. [ABSTRACT FROM AUTHOR]

A multi-element scintillation detector, consisting of eight NaI(Tl)/BGO scintillators surrounding a single NaI(Tl)/CsI(Tl) scintillator, was initially developed for locating and measuring concealed special nuclear materials that emit primarily low energy photons. Signal digitizers and LabView virtual instrument (VI) subroutines process and analyze pulses from each of the dual scintillators to suppress Compton interactions occurring in the central detector and discriminate between low and high energy photon events occurring within NaI(Tl) and CsI(Tl) crystals, respectively. Digital signal processing significantly improved the signal-to-noise ratio of the central detector and greatly reduced the analog electronic equipment required in the same time. [ABSTRACT FROM AUTHOR]

In the present study, the Compton background of the measured gamma-ray spectrum was suppressed by using the deconvolution method with applying the maximum likelihood fitting by expectation maximization (ML-EM) algorithm. The MATLAB program for deconvolution of the measured spectrum were written based on the applying of ML-EM algorithm in conjunction with a matrix of detector response functions within the energy range 0-1.9 MeV. The Compton Suppression Factor ( SF) ratio of the deconvolved spectrum is increased by approximately 3-9 times relative to the measured spectrum of Cs and Cs, respectively. Additionally, the photopeak areas of deconvolved spectra were considerably raised to compare with ones of measured spectra owing to accumulating the counting numbers of the background into appropriate photopeaks. [ABSTRACT FROM AUTHOR]

The concentration levels of U, Th, K and Cs in top soils of State of Punjab located in the North Western part of India were measured using conventional low background gamma ray spectrometric setup as well as Compton suppressed gamma ray spectrometric setup. The radioactivity level of U and Th was found to vary between 15 Bq/kg and 27 Bq/kg and between 16 Bq/kg and 57 Bq/kg respectively. The radioactivity level of K was found to vary between 266 Bq/kg and 799 Bq/kg. The mean radioactivity level of the NORM in general was found to be similar to what is expected as a result of their normal abundance. [ABSTRACT FROM AUTHOR]

The effective atomic numbers of composites and Rayleigh-to-Compton cross-section ratio of elements, in the range 6 ≤ Z ≤ 82 for 145 keV gamma photons, are determined experimentally. An HPGe (high purity germanium) semiconductor detector is placed, at scattering angle of 90°, to record the spectra originating from interactions of incident gamma photons with the target under investigations. The intensity ratio of Rayleigh-to-Compton scattered peaks, corrected for photo-peak efficiency of gamma detector and absorption of photons in the target and air column, is plotted as a function of atomic number and a best fit-curve is constituted. From this fit-curve, the respective effective atomic numbers of the scientific samples are determined. The measured values of cross-section ratio increases non-linearly with increase in atomic number and are found to agree with theoretical predictions based upon non-relativistic form factor, relativistic form factor, modified form factor and S-matrix theory. [ABSTRACT FROM AUTHOR]

GEANT4 Monte Carlo simulations have been successfully utilised to characterise a Compton suppressed broad-energy HPGe detector. The detector setup has been fully recreated in the simulation, which has been optimised to consistently reproduce the detector response. The peak efficiencies for both the primary BEGe detector and NaI(Tl) guard detectors agree with the simulated values for multiple test sources within 3 %. Compton suppression has also been simulated, with good agreement seen between the simulated and actual CSF values (<10 %) for multiple radionuclides. A secondary reference source was also simulated, which contained up to 30 radionuclides in a different geometry to that of the previous source. This showed excellent agreement with experimental data in both unsuppressed and suppressed modes of operation. [ABSTRACT FROM AUTHOR]

The difficulty to directly detect plutonium in spent nuclear fuel due to the high Compton background of the fission products motivates the design of a gamma detector with improved sensitivity at low energies. We have built such a detector by operating a thin high-purity Ge detector with a large scintillator Compton veto directly behind it. The Ge detector is thin to absorb just the low-energy Pu radiation of interest while minimizing Compton scattering of high-energy radiation from the fission products. The subsequent scintillator is large so that forward-scattered photons from the Ge detector interact in it at least once to provide an anti-coincidence veto for the Ge detector. For highest sensitivity, additional material in the line of sight is minimized, the radioactive sample is kept thin, and its radiation is collimated. We will discuss the instrument design, and demonstrate the feasibility of the approach with a prototype that employs two large CsI scintillator vetoes. Initial spectra of a thin Cs-137 calibration source show a background suppression of a factor of ~2.5 at ~100 keV, limited by an unexpectedly thick 4 mm dead layer in the Ge detector. [ABSTRACT FROM AUTHOR]

Nuclear material accountancy is of continuous concern for the regulatory, safeguards, and verification communities. In particular, spent nuclear fuel reprocessing facilities pose one of the most difficult accountancy challenges: monitoring highly radioactive, fluid sample streams in near real-time. The Multi-Isotope Process monitor will allow for near-real-time indication of process alterations using passive gamma-ray detection coupled with multivariate analysis techniques to guard against potential material diversion or to enhance domestic process monitoring. The Compton continuum from the dominant 661.7 keV Cs fission product peak obscures lower energy lines which could be used for spectral and multivariate analysis. Compton suppression may be able to mitigate the challenges posed by the high continuum caused by scattering. A Monte Carlo simulation using the Geant4 toolkit is being developed to predict the expected suppressed spectrum from spent fuel samples to estimate the reduction in the Compton continuum. Despite the lack of timing information between decay events in the particle management of Geant4, encouraging results were recorded utilizing only the information within individual decays without accounting for accidental coincidences. The model has been validated with single and cascade decay emitters in two steps: as an unsuppressed system and with suppression activated. Results of the Geant4 model validation will be presented. [ABSTRACT FROM AUTHOR]

Gamma-ray efficiency calculations for a germanium detector have been made for a Compton suppression system. Results have shown that for radionuclides that have gamma rays in coincidence the photopeaks can be severely depressed leading to erroneous results. While this can be overcome in routine neutron activation analysis using a comparator method, special consideration must be given to determine the suppression for coincident gamma rays when calculating the efficiency curve and for radionuclide activities. This is especially important for users of the k method and for fission product identification using Compton suppression methods. [ABSTRACT FROM AUTHOR]

We have written a Monte Carlo code to simulate the experimental results of a previously reported study. We were able to analyse the energy distributions of photons that reached the detector system after suffering several successive Compton scatterings in the target. We have also investigated how the number of multiply backscattered events depends on the target thickness and the energy of the primary photons. [ABSTRACT FROM AUTHOR]

Compton suppression (CS) has increased the sensitivity of gamma spectroscopy systems tenfold, and is routinely used in laboratories for environmental analysis and the monitoring of the CTBT. There are several different techniques available, and many more variables to consider when designing or optimising a CS system. An overview and discussion of these is presented here. [ABSTRACT FROM AUTHOR]

Phosphorus is an essential element for plants and animals, playing a fundamental role in the production of biochemical energy. Despite its relevance, phosphorus is not commonly determined by instrumental neutron activation analysis (INAA), because P does not emit gamma-rays in its decay. There are alternative methods for the determination of phosphorus by INAA, such as the use of beta counting or the measurement of bremsstrahlung originated from the high energy beta particle from P. Here the determination of phosphorus in plant materials by measuring the bremsstrahlung production was further investigated, to optimize an analytical protocol for minimizing interferences and overcoming the poor specificity. Eight certified reference materials of plant matrices with phosphorus ranging between 171 and 5,180 mg kg were irradiated at a thermal neutron flux of 9.5 × 10 cm s and measured with a HPGe detector at decay times varying from 7 to 60 days. Phosphorus solutions added to a certified reference material at three levels were used for calibration. Counts accumulated in the baseline at four different regions of the gamma-ray spectra were tested for the determination of phosphorus, with better results for the 100 keV region. The Compton scattering contribution in the selected range was discounted using an experimental peak-to-Compton factor and the net areas of all peaks in the spectra with energies higher than 218 keV, i.e. Compton edge above 100 keV. Amongst the interferences investigated, the production of P from sulfur, and the contribution of Compton scattering should be considered for producing good results. [ABSTRACT FROM AUTHOR]

Biological materials containing trace amounts of mercury and selenium were examined using neutron activation analysis. They were analyzed using Compton suppression and γ-γ coincidence counting. The 279 keV photopeak of activated mercury (Hg) was analyzed in order to observe the mercury content in these samples. Selenium, an element found in many biological samples, interferes with the analysis of Hg when activated (Se). Because the selenium interference comes from a cascading emission, Compton suppression was utilized to reduce this interference. In order to fully characterize the selenium content in the samples, γ-γ coincidence was used which reduced the background and eliminated bremsstrahlung interference produced from neutron activated phosphorous through the P( n, γ)P reaction which is a pure beta emitter. As a result, we determined the mercury and selenium concentrations in three standard reference materials, which contain varying ratios of mercury to selenium concentrations. This study also showed that these types of concentrations can be determined from small (<500 mg) sample masses. Further work needs to be done on wet samples that require dehydration, as mercury can be lost through this process. [ABSTRACT FROM AUTHOR]

As a non-destructive and multi-element technique, with high-level metrological properties, instrumental neutron activation analysis (INAA) has an important role to determine chemical elements in food. However, its use may be limited when looking for mass fractions near the detection limits. The Compton scattering of higher energy gamma-rays raised the spectrum baseline thus impairing the determination of several elements. Therefore, the gamma-ray spectrometry with Compton suppression becomes an alternative for improving the performance of INAA, since it can reduce the uncertainty of measurements and the detection limits by increasing the proportion between photopeak area and baseline. Here the performance of a Compton suppression system set by Ortec, with 50% relative efficiency and 2.04 keV resolution (FWHM) for the 1,332 keV photopeak, was evaluated for food analysis. Samples of beans, chickpeas, lentils, peas, and rice were irradiated with neutrons and measured in the suppression system. Detection limits calculated from suppressed and unsuppressed spectra were compared. The suppression factor achieved by the system for Cs was 5.88 ± 0.11 ( n = 20) in the plateau region (358 to 382 keV), which was stable along a 20 week period and similar to the data provided in literature for other systems. Amongst fifteen elements determined, the detection limits for Br, Co, La, Na, Sc, and Se were not improved by the use of Compton suppression. On the other hand, the variable improvement obtained for As, Ca, Cd, Cr, Fe, Hg, K, Rb, and Zn corroborated the idea that the performance of the Compton suppressor must be individually assessed for each type of sample. [ABSTRACT FROM AUTHOR]

A new Compton suppression system (CSS) for the gamma-ray spectrometer portion of the neutron activation analysis (NAA) was set up at the RPI/ITN. The pneumatic transfer system, SIPRA, for short-lived nuclides and cyclic irradiations was improved. A full calibration procedure of the CSS and SIPRA systems was performed. Two certified reference materials, NIST-SRM-1572 (Citrus Leaves) and NIST-SRM-1633a (Coal Fly Ash) were analyzed using the calibration factors. The CSS was instrumental in lowering the detection limits of Cr, Fe, Hg, Rb, Sr, Th and Zn by reducing background and/or spectral interference considerably. The analytical results were evaluated by comparison to the NIST certified values with deviations ranging from 2% to 8% for the above mentioned elements, except Zn ranging from 10% to 15% for biological and environmental samples, respectively. [ABSTRACT FROM AUTHOR]

Low-energy photons produced by the Compton scattering from hydrogen increase the background in the lower-energy region of the gamma-ray spectrum. This results in an increase in the detection limit for trace elements. In multiple photon detection prompt gamma-ray analysis (MPGA), only those elements that simultaneously emit two or more prompt gamma-rays, which have cascade relation and are emitted within a short interval, can be measured. Therefore, the influence of hydrogen can be reduced. In this study, standard polymer and food samples are measured. The hydrogen background is reduced in MPGA. [ABSTRACT FROM AUTHOR]

Different methodologies of neutron activation analysis (NAA) are now available at the Technological and Nuclear Institute (Sacavém, Portugal), namely Compton suppression, epithermal activation, replicate and cyclic activation, and low energy photon measurement. Prompt gamma activation analysis (PGAA) will be implemented soon. Results by instrumental NAA and PGAA on environmental and nutritional samples are discussed herein, showing that PGAA — carried out at the Institute of Isotope Research (Budapest, Hungary) — brings about an effective input to assessing relevant elements. Sensitivity enhancement in NAA by Compton suppression is also illustrated. Through a judicious combination of methodologies, practically all elements of interest in pollution and nutrition terms can be determined. [ABSTRACT FROM AUTHOR]

The Compton suppression system (CSS) has been thoroughly characterized at the University of Texas’ Nuclear Engineering Teaching Laboratory (NETL). Effects of dead-time, sample displacement from primary detector, and primary energy detector position relative to the active shield detector have been measured and analyzed. Also, the applicability of Poisson counting statistics to Compton suppression spectroscopy has been evaluated. [ABSTRACT FROM AUTHOR]

The Comprehensive Nuclear-Test-Ban Treaty (CTBT) is supported by a network of certified laboratories that perform high-resolution gamma-spectrometry on global air filter samples for the identification of 85 radionuclides. At the UK CTBT Radionuclide Laboratory (GBL15), the use of advanced Compton suppressed systems has been investigated to reduce the Compton continuum and improve detection sensitivity. Samples collected from the Philippines and during the Fukushima incident have been measured, demonstrating Compton continuum reductions of 28-59 % with suppression factors of 0.1-147.0. Detection sensitivity has been improved with typically 40 % lower MDAs, including Ba to meet CTBT requirements. True coincidence summing effects have been considered, including the application to remove interferences by the elimination of gamma-rays in cascade. This has been demonstrated for the removal of Cs allowing improved I measurement. [ABSTRACT FROM AUTHOR]