Search

We present the results of investigations on the possibility of the application of the asphaltene fraction isolated from the oxidized residue from vacuum distillation of crude oil as a stationary phase for gas chromatography. The results of the investigation revealed that the asphaltene stationary phases can find use for the separation of a wide range of volatile organic compounds. The experimental values of Rohrschneider/McReynolds constants characterize the asphaltenes as stationary phases of medium polarity and selectivity similar to commercially available phases based on alkyl phthalates. Isolation of asphaltenes from the material obtained under controlled process conditions allows the production of a stationary phase having reproducible sorption properties and chromatographic columns having the same selectivity. Unique selectivity and high thermal stability make asphaltenes attractive as a material for stationary phases for gas chromatography. A low production cost from a readily available raw material (oxidized petroleum bitumens) is an important economic factor in case of application of the asphaltene stationary phases for preparative and process separations. [ABSTRACT FROM AUTHOR]

We present the results of investigations of the chromatographic (sorptive) properties of silanized silica gel as a stationary phase for gas chromatography used for simulated distillation. Commercially available silanized sorbent (particle diameter range 63-200 μm, average pore size 60 Å) was sieved to obtain the 80-100 mesh fraction (180-150 μm). The obtained results revealed that silanized silica gel allows the complete separation of a mixture of n- and iso-alkanes in the C1-C7 range. Such a separation is achieved with a temperature program starting with an initial temperature of 50˚C, which is advantageous because the gas chromatograph oven does not have to be cooled below room temperature. The use of temperature programming with a final temperature of 300˚C ensures separation and elution of all mixture components from C1 to n-C28 in one run. This study confirms the applicability of silanized silica gel as a stationary phase for the investigation of distillation temperature distribution of gasoline and diesel fuel based on the simulated distillation procedure according to ASTM D2887. The deviations of individual points of distillation curve obtained using ASTM D2887 and columns packed with silanized silica gel were within the reproducibility range of the standard procedure. [ABSTRACT FROM AUTHOR]