Search

In the present study, three types of silica-based monoliths, i.e. the first and second generations of commercial silica monolithic columns and a wide-pore prototype monolith were compared for the analysis of large biomolecules. These molecules possess molecular weights between 1 and 66 kDa. The gradient kinetic performance of the first-generation monolith was lower than that of the second generation, for large biomolecules (>14 kDa) but very close with smaller ones (1.3-5.8 kDa). In contrast, the wide-pore prototype column was particularly attractive with proteins larger than 19 kDa (higher peak capacity). Among these three columns, the selectivity and retention remained quite similar but a possible larger number of accessible and charged residual silanols was noticed on the wide-pore prototype material, which led to unpredicted small changes in selectivity and slightly broader peaks than expected. The peak shapes attained with the addition of 0.1% formic acid in the mobile phase remained acceptable for MS coupling, particularly for biomolecules of less than 6 kDa. It was found that one of the major issues with all of these silica-based monoliths is the possible poor recovery of large biomolecules (principally with monoclonal antibody fragments of more than 25 kDa).

CZE allows to measure the acidic dissociation constant (pKa) of many drug substances. However, determining the EOF intensity may be time-consuming, especially at a low pH. In order to overcome this drawback, a dynamic coating procedure of the capillary was carried out to increase microEOF, and thus to reduce the analysis time. In addition, this coating procedure enhanced migration time stability. The effective mobilities of 15 compounds were measured at different pH, producing pK'a values dependent on BGE ionic strength. The latter values were corrected with the activity coefficient to obtain a "true" pKa value. The 15 investigated compounds were (i) five acids: namely, salicylic acid, benzoic acid, ketoprofen, phenobarbital, and phenol, (ii) four bases: lidocaine, propafenone, propranolol, and quinine, (iii), five ampholytes: sulfanilamide, sulfabenzamide, sulfadimethoxine, sulfadoxine, and sulfisoxazole, and (iv) one zwitterion: cetirizine. The range of determined pKa values was between 1.2 and 11.2, and close to the pKa values available from the literature.

An RPLC was developed to rapidly determine lipophilicity of neutral and basic compounds using three base deactivated RPLC stationary phases particularly designed for the analysis of basic compounds, namely, Supelcosil ABZ(+)Plus, Discovery RP Amide C16, and Zorbax Extend C18. The work consisted of three sets of experiments. In the first log kw values of neutral compounds were extrapolated using hydroorganic mobile phases at different compositions. Good correlation between log kw and log Poct indicated that the method was appropriate for these supports, without adding a silanol masking agent. In the second set of experiments, isocratic log k values of neutral and basic compounds were measured with three different mobile phases. The best estimation of lipophilicity was obtained for neutral and basic compounds when the secondary interactions were strongly reduced (i. e., when basic compounds were under their neutral form). In the third set of experiments, isocratic retention factors of basic compounds (in their neutral form) were measured with a high-pH mobile phase, on a chemically stable support (Zorbax Extend C18). Under these chromatographic conditions, correlation between the isocratic retention factors and log Poct (log D10.5) for basic compounds was similar to that for neutral compounds.

Reversed-phase liquid chromatography (RP-HPLC) has become a powerful and widely employed technique for the analysis of a great variety of substances and, in particular, of basic compounds. These compounds are present in various areas. In pharmacy, 80% of drugs are estimated to possess a basic function. Basic compounds can strongly interact with free silanol groups on the surface of the silica particles. These ion exchange interactions produce peak tailing which affects resolution, sensitivity, and reproducibility. For these reasons, many new stationary phases have been designed to reduce access to silanol groups. The main problem facing the analyst is to effectively select the best column for a particular type of separation. In order to characterize and evaluate the properties of these packings, several tests are proposed in the literature, which can be divided into two main categories: general tests and particular tests. In this work, a particular test was developed for the characterization of base deactivated RP-HPLC stationary phases. For this purpose, a set of 14 basic test substances was selected and five different chromatographic supports were tested with three isocratic mobile phases. Furthermore, in order to undertake a complete characterization of these supports, batch and column reproducibility were also studied. Principal Component Analysis was applied to evaluate both the performance of the test compounds and of the stationary phases.

Reversed phase high performance liquid chromatography (RPLC) is currently the method of choice for the analysis of basic compounds. However, with traditional silica materials, secondary interactions between the analyte and residual silanols produce peak tailing which can negatively affect resolution, sensitivity, and reproducibility. In order to reduce these secondary interactions, which comprise ion exchange, hydrogen bonding, and London forces interactions, chromatographic analyses can be carried out at low or high pH values where silanol groups and basic compounds are mostly uncharged. The chromatographic behaviour of a particular bidentate stationary phase, Zorbax Extend C18, was studied with a set of basic and neutral compounds. Thanks to a higher chemical stability than traditional silica based supports, analyses were carried out with a high pH mobile phase, which represents a good alternative to the acidic mobile phases generally used to reduce ion exchange interactions. The performance of this bidentate stationary phase was also compared with that of other supports and it was proved that it is advantageous to work with high pH mobile phases when analyzing basic compounds.