Search

This study's objective was to identify a difference in maximum temperature change during forward versus oscillating drilling of cadaveric bone. Paired femurs were dissected from the soft tissue of five cadavers. Each cadaver had one femur assigned to forward and the other to oscillation. The first drill hole was 2.5 cm distal to the lesser trochanter and the remaining 10 holes were evenly spaced 2 cm apart. A System 7 drill and 3.5 mm drill bit were attached to an Instron 5500R to provide a progressive force of 50 Newtons per minute for each drill hole. A thermal camera recorded each drilling. A new drill bit was used for each femur. Fifty bicortical drillings were analyzed in each group. The average time to complete forward drilling (45.0 seconds) was shorter compared to oscillation (55.5 s, p0.001). The average force required for forward drilling (27.7 N) was lower than for oscillation (44.3N, p0.001). The maximum change in temperature during the drilling process was similar (oscillating 100.2° F vs. forward 100.7° F, p = 0.871). The maximum change in temperature at the near cortex was lower for oscillation (78.1°F) compared to forward drilling (89.1°F, p = 0.011), while the maximum change at the far cortex was lower for forward drilling (89.3°F) compared to oscillation (95.8°F, p = 0.115) but not significantly. Overall, there is no difference in the thermal output between techniques. Oscillation may be beneficial in proximity to vital structures or to navigate narrow bony corridors, but it requires additional time and force. (Journal of Surgical Orthopaedic Advances 31(4):233-236, 2022).

Vancouver B1 periprosthetic fractures undergoing operative fixation remain difficult to treat due to a short proximal segment that offers limited options for fixation. The trochanteric hook plate addresses this issue by maximizing proximal purchase and utilizing the entire lateral surface area of the greater trochanter. A surgical technique that prioritizes proximal fixation and adheres to basic principles resulted in all fractures healing in a small case series. (Journal of Surgical Orthopaedic Advances 29(4):199-201, 2020).

The objective of this study was to describe examples and review the literature of distal humerus fracture reconstruction in the setting of severe bone loss. Four individuals (ages 19-59 years) were treated with either fibular strut allograft or fresh frozen osteochondral allograft in the setting of unreconstructable periarticular bone loss. The radiographs were evaluated for evidence of union. Pain and degrees of range of motion were reported when available. The follow-up period ranged from 3 to 42 months. While additional surgery was often needed, union was ultimately obtained in each case. Normal range of motion was not obtained, but two of the four patients were near normal upon union. Two of the four patients were pain free, and the other two had mild pain. All were limited in their activities, even after union. This case series describes satisfactory results with the use of allograft in this difficult clinical problem. (Journal of Surgical Orthopaedic Advances 29(2):65-72, 2020).

The goal of treatment for distal radius fractures is anatomic articular reduction and restoration of coronal and sagittal plane alignment, rotation, and angulation of the metadiaphyseal component of these fractures. This article presents a reproducible technique for restoring coronal plane alignment of the metadiaphyseal component of the fracture using an indirect reduction maneuver leveraging the volar locking plate as an indirect reduction aid. After applying an appropriately sized volar locking plate, the first screw is placed in the center of the shaft of the plate. Next, the distal row of subarticular locking screws is placed to neutralize a reduced articular surface. The shaft screw is subsequently loosened, and two Freer elevators are used to rotate the plate, indirectly translating the distal articular block and achieving improved coronal plane alignment. Last, the remaining diaphyseal screws are applied to appropriately neutralize the fracture. (Journal of Surgical Orthopaedic Advances 27(2):160-163, 2018).

The purpose of this study was to evaluate midterm outcomes after both bone forearm fractures. A retrospective review of patients treated with open reduction and internal fixation (ORIF) at three level 1 trauma centers was completed. Eligible patients were sent three questionnaires: Disabilities of the Arm, Shoulder and Hand (DASH), Short Form-12 (SF-12), and questions about postinjury experience. Twenty-nine patients with an average age of 45 years returned the materials. The forms were completed an average of 60 months after ORIF. The mean DASH was 22 for all respondents. Twenty-one subjects participated in physical therapy (72%). Eight patients (28%) screened positive for posttraumatic stress disorder (PTSD). The mean SF-12 physical component score was 39 and the SF-12 mental component score was 40, both of which were lower than the non-PTSD group, indicating a lower subjective level of health (p.05). The data suggest that, years after surgery, patients have decreased functional outcomes.

The current report describes a revision total hip arthroplasty in which the trial femoral head disassociated during reduction and migrated into a soft tissue capsule of the true pelvis between the external iliac vein and corona mortise. The authors believe this previously undescribed migration pattern was created by the patient's history of recurrent dislocations. To retrieve the trial prosthesis without injuring the adjacent vasculature, a secondary surgical approach was utilized. The described case identifies the risk of pelvic migration in patients with a history of dislocations and reminds us that a secondary surgical approach should be considered to avoid devastating injury to the neighboring vasculature.

Iliosacral screw removal is occasionally necessary during index or revision pelvic ring surgery. This procedure can necessitate a two-step process: screw removal followed by retained washer removal. On attempted removal of the screw-washer complex, the washer will not uncommonly dissociate itself from the screw. Its retrieval can be challenging, add unnecessary operative time, and result in larger incisions and increased soft tissue disruptions. This article introduces a simple technique for retained washer retrieval when removing or exchanging iliosacral screws. This technique involves an "interference fit" between the retained washer and a screw or tap of larger diameter, allowing for reliable and simple washer extraction. Advantages of this technique include removal through the same soft tissue tract as initial screw insertion and subsequent screw removal. It also obviates the need for introduction of various clamps to extract the washer, which can result in soft tissue injury and increased reliance on fluoroscopy.

External fixation is an important option in the acute management of unstable femoral and tibial fractures and the temporary stabilization of periarticular injuries of the knee or ankle. The value of external fixation as the modality of choice in selective civilian and military applications is well documented. Primary indications include damage control for multitrauma management in patients with concomitant traumatized integument and/or excessive swelling and/or systemic instability and stabilization for transport in hostile or austere environments. The purpose of this article is to discuss the indications for temporary external fixation of lower extremity long bones and complicated distal femoral, proximal tibia, and tibial plafond fractures; to outline technical considerations in the application of temporary external fixation devices; and to summarize the experience in the use of prepackaged external fixators and their indications in combat.