Search

Fiber combiner is an effective device to enhance the power level or broaden the spectral wavelengths through a single monolithic output aperture, by fusing multiple fibers together. This is particularly important in mid‐infrared (MIR) 2–5 µm range, in which the output power of a single laser is limited. Due to the high MIR transmission, chalcogenide glass is an ideal host for constructing MIR fiber combiner. In this study, we report the design, fabrication, and characterization of a homemade 3 × 1 chalcogenide glass fiber combiner. The fiber combiner includes a 3 × 1 As–S input fiber bundle and an output fiber. The input fiber bundle was made by tapering three As–S multimode fibers with a core diameter of 200 µm and a cladding diameter of 250 µm. The taper reduction ratio R was 2, and the length of the taper transition region was ∼2 cm. The output fiber with core diameter of 360 µm and cladding diameter of 570 µm was then spliced with the tapered end of the fiber bundle. The total length of the combiner was ∼53 cm. The measurement of power combination at 4.56 µm indicated that the transmission efficiency of three ports reached 80%, whereas the power combining efficiency of the combiner was measured to be ∼48%. In addition, efficient wavelength combining over one octave has been demonstrated, by launching three different lasers at 2.1, 3.39, and 4.56 µm through the 3 × 1 combiner. It proves that chalcogenide fiber combiner is promising for the applications of high‐level power combination and broadband wavelength combining in MIR 2–5 µm range. [ABSTRACT FROM AUTHOR]