Search

So far, developed microwave absorbers exhibit significant changes in absorption with temperature, which hinder their operation within a wide temperature range. In this paper, a microwave absorber based on SiBCN ceramics was prepared. Due to the excellent high‐temperature stability of SiBCN ceramics, its permittivity changes less with temperature, avoiding the issue of performance deterioration or even failure that traditional refractory absorbers face at high temperatures. The experiment proves the absorption bandwidth for –15 dB of the SiBCN metamaterials absorber (SMA) is 12 GHz at 800°C, with a maximum absorptivity of 99.99%. According to the computed data, the resonance loss contributes 81.9 to 94.5% of the microwave absorption of SMA. This work demonstrates significant potential for applications in radar stealth under harsh conditions. [ABSTRACT FROM AUTHOR]

B4C ceramics have been widely used in armor plate and cutting tools due to their high hardness. However, their poor sintering performance and low fracture toughness have limited their extended applications. In order to solve these problems, B4C@TiB2 composite powders with core–shell structure were prepared by a sol–gel method using B4C and TiCl4 as raw materials and then sintered by spark plasma sintering. The composite powders were characterized by X‐ray diffraction, X‐ray photoelectron spectroscopy, and scanning electron microscopy. The mechanical properties of B4C ceramics were tested by indentation and three‐point bending methods. The results showed that the B4C@TiB2 composite powders exhibited a tight core–shell structure, and the chemical bonds on the surface were mainly B–C and B–Ti bonds. When the molar ratio of B4C:TiCl4 was 2:1, the relative density and bulk density of B4C ceramics reached 96.2% and 2.92 g/cm3, respectively. Because of the good sintering performance of the B4C@TiB2 composite powders, the Vickers hardness and fracture toughness reached 26.6 GPa and 5.22 MPa m1/2, respectively. The bending strength reached a maximum of 570 MPa. The excellent fracture toughness can be attributed to crack deflection, crack branching, and the residual thermal stress of the core–shell structure. [ABSTRACT FROM AUTHOR]

A series of Ce3+ and Tb3+ singly‐ and co‐doped NaBa4(AlB4O9)2Cl3 (NBAC) phosphors have been synthesized via high‐temperature solid state route. The crystal structure, morphology, photoluminescent properties, thermal properties and energy transfer process between Ce3+ and Tb3+ were systematically investigated. The structure refinements indicated that the phosphors based on NBAC crystallized in P42nm polar space group in monoclinic phase. The emission color could be tuned from blue (0.1595, 0.0955) to green (0.2689, 0.4334) via changing the ratio of Ce3+/Tb3+. The energy transfer mechanism of Ce3+/Tb3+ was verified to be dipole–quadrupole interaction via the examination of decay times of Ce3+ based on Dexter's theory. The good thermal stability showed the intensities of Ce3+ at 150°C were about 66.9% and 64.88% in NBAC:0.09Ce3+ and NBAC:0.09Ce3+, 0.07Tb3+ of that at room temperature, and the emission intensities of Tb3+ remained 102.41% in NBAC:0.11Tb3+ and 95.22% in NBAC:0.09Ce3+, 0.07Tb3+ due to the nephelauxetic shielding effect and the highly asymmetric rigid framework structure of NBAC. The maximum external quantum efficiency (EQE) of Ce3+ in NBAC:0.09Ce3+, yTb3+ phosphors could reach 43.38% at y = 0.13. Overall, all the results obtained suggested that NBAC:Ce3+, Tb3+ could be a promising option for n‐UV pumped phosphors. [ABSTRACT FROM AUTHOR]

Abstract: Charge compensation was the effective methods to enhance the luminescence properties of phosphors. In this paper, novel single‐phased orange light emitting Sr2Mg3P4O15:Eu3+ phosphors were prepared by solid state method. The phase purity and luminous characteristics were examined in detail. Meanwhile, three kinds of charge compensation methods (co‐doping the alkali metal R+ (R+ = Li, Na, and K), substituting Si4+ for P5+ and self‐compensation) were employed to solve the charge imbalance problem between Sr2+ and Eu3+. The results showed that emission intensity of Eu3+ was improved by 1.43 (Li+), 1.58 (Na+), 1.53 (K+), 1.61 (Si4+), and 1.30 (self) times than that of Sr1.6Mg3P4O15:0.40Eu3+, respectively, and there was no change in the emitting color simultaneously. Furthermore, as the temperature reached at 423 K, the emission intensity increased from 41.67% of Sr1.6Mg3P4O15:0.40Eu3+ to 55.69% (Li+), 61.62% (Na+), 58.98% (K+), 71.15% (Si4+), and 80.59% (self) of that at room temperature. The reasons of those phenomena were the reduction in ion vacancies caused by charge imbalance through the charge compensation process. The specific mechanisms were elaborated in detail. Overall, this research validated that the charge compensation strategies could be severed as the key method to improve the luminescence properties, especially the thermal stability of phosphor. [ABSTRACT FROM AUTHOR]

Abstract: Charge compensation was the effective methods to enhance the luminescence properties of phosphors. In this paper, novel single‐phased orange light emitting Sr2Mg3P4O15:Eu3+ phosphors were prepared by solid state method. The phase purity and luminous characteristics were examined in detail. Meanwhile, three kinds of charge compensation methods (co‐doping the alkali metal R+ (R+ = Li, Na, and K), substituting Si4+ for P5+ and self‐compensation) were employed to solve the charge imbalance problem between Sr2+ and Eu3+. The results showed that emission intensity of Eu3+ was improved by 1.43 (Li+), 1.58 (Na+), 1.53 (K+), 1.61 (Si4+), and 1.30 (self) times than that of Sr1.6Mg3P4O15:0.40Eu3+, respectively, and there was no change in the emitting color simultaneously. Furthermore, as the temperature reached at 423 K, the emission intensity increased from 41.67% of Sr1.6Mg3P4O15:0.40Eu3+ to 55.69% (Li+), 61.62% (Na+), 58.98% (K+), 71.15% (Si4+), and 80.59% (self) of that at room temperature. The reasons of those phenomena were the reduction in ion vacancies caused by charge imbalance through the charge compensation process. The specific mechanisms were elaborated in detail. Overall, this research validated that the charge compensation strategies could be severed as the key method to improve the luminescence properties, especially the thermal stability of phosphor. [ABSTRACT FROM AUTHOR]