Search

This research made use of the IMSERC NMR, MS and PXRD facility at Northwestern University, which has received support from the Soft and Hybrid Nanotechnology Experimental (SHyNE) Resource (NSF ECCS-2025633) and Northwestern University. This research made use of the EPIC SEM facility of Northwestern University’s NUANCE Center, which has received support from the SHyNE Resource (NSF ECCS-2025633), the IIN, and Northwestern's MRSEC program (NSF DMR-1720139). Supramolecular polymers are materials in which the connections between monomers in the polymer main chain are non-covalent bonds. This area has seen rapid expansion in the last two decades and has been exploited in several applications. However, suitable contiguous hydrogen bond arrays can be difficult to synthesize, placing some limitations on the deployment of supramolecular polymers. We have designed a hydrogen bonded polymer assembled from a bifunctional monomer composed of two replicating templates separated by a rigid spacer. This design allows the autocatalytic formation of the polymer main chain through the self-templating properties of the replicators and drives the synthesis of the bifunctional monomer from its constituent components in solution. The template-directed 1,3-dipolar cycloaddition reaction between nitrone and maleimide proceeds with high diastereoselectivity affording the bifunctional monomer. The high binding affinity between the self-complementary replicating templates that allow the bifunctional monomer to polymerize in solution is derived from the positive cooperativity associated with this binding process. The assembly of the polymer in solution has been investigated by DOSY NMR spectroscopy. Both microcrystalline and thin films of the polymeric material can be prepared readily and have been characterized by powder X-ray diffraction and scanning electron microscopy. These results demonstrate that the approach described here is a valid one for the construction of supramolecular polymers and can be extended to systems where the rigid spacer between the replicating templates is replaced by one carrying additional function. Postprint

This work was supported by the award of a Postgraduate Studentship from Engineering and Physical Sciences Research Council (EP/K503162/1) to TK and by the University of St Andrews. The emergence of collections of simple chemical entities that create self-sustaining reaction networks, embedding replication and catalysis, is cited as a potential mechanism for the appearance on the early Earth of systems that satisfy minimal definitions of life. In this work, a functional reaction network that creates and maintains a set of privileged replicator structures through auto- and cross-catalyzed reaction cycles is created from the pairwise combinations of four reagents. We show that the addition of individual preformed templates to this network, representing instructions to synthesize a specific replicator, induces changes in the output composition of the system that represent a network-level response. Further, we establish through sets of serial transfer experiments that the catalytic connections that exist between the four replicators in this network and the system-level behavior thereby encoded impose limits on the compositional variability that can be induced by repeated exposure to instructional inputs, in the form of preformed templates, to the system. The origin of this persistence is traced through kinetic simulations to the properties and inter-relationships between the critical ternary complexes formed by the auto- and crosscatalytic templates. These results demonstrate that in an environment where there is no continuous selection pressure, the network connectivity, described by the catalytic relationships and system-level interactions between the replicators, is persistent, thereby limiting the ability of this network to adapt and evolve. Postprint

Financial support for this work was provided by the University of St Andrews and EaStCHEM, Northwestern University, and the Engineering and Physical Sciences Research Council (Grant EP/K503162/1). Establishing instructable and self-sustaining replication networks in pools of chemical reagents is a key challenge in systems chemistry. Self-replicating templates are formed from two constituent components with complementary recognition and reactive sites via a slow bimolecular pathway and a fast template-directed pathway. Here, we re-engineer one of the components of a synthetic replicator to encode an additional recognition function, permitting the assembly of a binary complex between the components that mediates replicator formation through a template-independent pathway, which achieves maximum rate acceleration at early time points in the replication process. The complementarity between recognition sites creates a key conformational equilibrium between the catalytically inert product, formed via the template-independent pathway, and the catalytically active replicator that mediates the template-directed pathway. Consequently, the rapid formation of the catalytically inert isomer “kickstarts” replication through the template-directed pathway. Through kinetic analyses, we demonstrate that the presence of the two recognition-mediated reactivity modes results in enhanced template formation in comparison to systems capable of exploiting only a single recognition-mediated pathway. Finally, kinetic simulations reveal that the conformational equilibrium and both the relative and absolute efficiencies of the recognition-mediated pathways affect the extent to which self-replicating systems can benefit from this additional template-independent reactivity mode. These results allow us to formulate the rules that govern the coupling of replication processes to alternative recognition-mediated reactivity modes. The interplay between template-directed and template-independent pathways for replicator formation has significant relevance to ongoing efforts to design instructable and adaptable replicator networks. Postprint

We thank the EPSRC (EP/I035536/1; EP/J015067/1), The Royal Society (University Research Fellowship to JEL) and Wellcome Trust (099149/Z/12/Z) for funding and the EPSRC UK National Mass Spectrometry Facility at Swansea University for mass spectra. Paramagnetic endohedral fullerenes with long spin coherence times, such as N@C60 and Y@C82, are being explored as potential spin quantum bits (qubits). Their use for quantum information processing requires a ways to hold them in fixed spatial arrangements. Here we report the synthesis of a porphyrin-based two-site receptor 1 , offering a rigid structure that binds spin-active fullerenes (Y@C82) at a center-to-center distance of 5.0 nm, predicted from molecular simulations. The spin-spin dipolar coupling was measured with the pulsed EPR spectroscopy technique of double electron electron resonance (DEER) and analysed to give a distance of 4.87 nm with a small distribution of distances. Postprint

This research was supported by the Engineering & Physical Sciences Research Council (EPSRC) and the Biotechnology & Biological Sciences Research Council (BBSRC), UK (EP/D048559). AMB and EOJD were supported by graduate studentships from the BBSRC (BB/F01709X/1) and NJH and JEL were supported by graduate studentships from the EPSRC, and JEL after her DPhil by EP/D048559. AMB gratefully acknowledges her current fellowship support from the Royal Society and EPSRC for a Dorothy Hodgkin Fellowship (DH160004). JRH acknowledges support from the ARC (FT120100421) and the Centre for Advanced Imaging, The University of Queensland. Cytochrome P450 (CYP) monooxygenases catalyze the oxidation of chemically inert carbon-hydrogen bonds in diverse endogenous and exogenous organic compounds by atmospheric oxygen. This C–H bond oxy-functionalization activity has huge potential in biotechnological applications. Class I CYPs receive the two electrons required for oxygen activation from NAD(P)H via a ferredoxin reductase and ferredoxin. The interaction of Class I CYPs with their cognate ferredoxin is specific. In order to reconstitute the activity of diverse CYPs, structural characterization of CYP-ferredoxin complexes is necessary, but little structural information is available. Here we report a structural model of such a complex (CYP199A2-HaPux) in frozen solution derived from distance and orientation restraints gathered by the EPR technique of orientation-selective double electron-electron resonance (os-DEER). The long-lived oscillations in the os-DEER spectra were well modeled by a single orientation of the CYP199A2-HaPux complex. The structure is different from the two known Class I CYP-Fdx structures: CYP11A1-Adx and CYP101A1-Pdx. At the protein interface, HaPux residues in the [Fe2S2] cluster-binding loop and the α3 helix, and the C-terminus residue interact with CYP199A2 residues in the proximal loop and the C helix. These residue contacts are consistent with biochemical data on CYP199A2-ferredoxin binding and electron transfer. Electron-tunneling calculations indicate an efficient electron-transfer pathway from the [Fe2S2] cluster to the heme. This new structural model of a CYP-Fdx complex provides the basis for tailoring CYP enzymes for which the cognate ferredoxin is not known, to accept electrons from HaPux and display monooxygenase activity. Postprint

The financial support for this work was provided by EaStCHEM and the Engineering and Physical Sciences Research Council (Grant EP/K503162/1). The creation of reaction networks capable of exhibiting responses that are properties of entire systems represents a significant challenge for the chemical sciences. The system- level behavior of a reaction network is linked intrinsically to its topology and the functional connections between its nodes. A simple network of chemical reactions constructed from four reagents, in which each reagent reacts with exactly two others, can exhibit up-regulation of two products even when only a single chemical reaction is addressed catalytically. We implement a system with this topology using two maleimides and two nitrones of different sizes—either short or long and each bearing complementary recognition sites—that react pairwise through 1,3-dipolar cycloaddition reactions to create a network of four length-segregated replicating templates. Comprehensive 1H NMR spectroscopy experiments unravel the network topology, confirming that, in isolation, three out of four templates self-replicate, with the shortest template exhibiting the highest efficiency. The strongest template effects within the network are the mutually cross-catalytic relationships between the two templates of intermediate size. The network topology is such that the addition of different preformed templates as instructions to a mixture of all starting materials elicits system-level behavior. Instruction with a single template up-regulates the formation of two templates in a predictable manner. These results demonstrate that the rules governing system-level behavior can be unraveled through the application of wholly synthetic networks with well-defined chemistries and interactions. Postprint

The financial support for this work was provided by the University of St Andrews and the Engineering and Physical Sciences Research Council (Grant EP/K503162/1). A network of two synthetic replicators exhibits a critical unidirectional cross-catalytic relationship that directs competing replication processes. In this network, nitrone N bearing a 6-methylamidopyridine recognition site can participate in 1,3-dipolar cycloaddition reactions with two maleimides that differ in the relative position of their carboxylic acid recognition site: either para (Mp) or meta (Mm) relative to the maleimide ring. These cycloaddition reactions create replicators trans-Tp and trans-Tm. In isolation, trans-Tp templates its own formation with an efficiency that is markedly greater than that of trans-Tm. Kinetic fitting and simulations reveal that this efficiency arises from a higher template-mediated rate constant for the cycloaddition and lower stability of the trans-Tp template duplex, compared to trans-Tm. By contrast, in a situation where Mp and Mm compete for a limited quantity of N, the normally less efficient trans-Tm outcompetes trans-Tp. Through a series of comprehensive kinetic 19F{1H} NMR spectroscopy experiments, this system-level outcome is traced to a critical cross-catalytic pathway, whereby the presence of trans-Tp templates the formation of trans-Tm, but not vice versa. Replicator trans-Tm also reduces the efficiency of its competitor trans-Tp by sequestering trans-Tp in a heteroduplex that is more stable than homoduplex [Tp•Tp]. The addition of different templates as instructions reveals that, while the outcome of competition between replicators can be altered selectively, it is limited by the reaction environment employed. These results represent a conceptual and practical framework for the examination of selectivity in replication networks operating outside well-stirred batch reactor conditions. Postprint

The authors gratefully acknowledge financial support from the European Commission (SuBiCat Initial Training Network, Call FP7-PEOPLE-2013-ITN, grant no. 607044). Conversion of lignin into well-defined aromatic chemicals is a highly attractive goal, but is often hampered by recondensation of the formed fragments, especially in acidolysis. Here, we describe new strategies that markedly suppress such undesired pathways to result in diverse aromatic compounds previously not systematically targeted from lignin. Model studies established that a catalytic amount of triflic acid is very effective in cleaving the β-O-4 linkage, most abundant in lignin. An aldehyde product was identified as the main cause of side reactions under cleavage conditions. Capturing this unstable compound by reaction with diols and by in situ catalytic hydrogenation or decarbonylation lead to three distinct groups of aromatic compounds in high yields acetals, ethanol and ethyl aromatics, and methyl aromatics. Notably, the same product groups were obtained when these approaches were successfully extended to lignin. In addition, the formation of higher molecular weight side products was markedly suppressed, indicating that the aldehyde intermediates play a significant role in these processes. The described strategy has the potential to be generally applicable for the production of interesting aromatic compounds from lignin. Postprint

This work was supported by NIH research grants GM068036 (V.L.S.) and GM65368 (A.K.), and NSF grant CHE-0133117 (A.K.). The role of fast protein dynamics in enzyme catalysis has been of great interest in the past decade. Recent “heavy enzyme” studies demonstrate that protein mass-modulated vibrations are linked to the energy barrier for the chemical step of catalyzed reactions. However, the role of fast dynamics in the overall catalytic mechanism of an enzyme has not been addressed. Protein mass-modulated effects in the catalytic mechanism of Escherichia coli dihydrofolate reductase (ecDHFR) are explored by isotopic substitution (13C, 15N, and non-exchangeable 2H) of the wild-type ecDHFR (l-DHFR) to generate a vibrationally perturbed “heavy ecDHFR” (h-DHFR). Steady-state, pre-steady-state, and ligand binding kinetics, intrinsic kinetic isotope effects (KIEint) on the chemical step, and thermal unfolding experiments of both l- and h-DHFR show that the altered protein mass affects the conformational ensembles and protein–ligand interactions, but does not affect the hydride transfer at physiological temperatures (25–45 °C). Below 25 °C, h-DHFR shows altered transition state (TS) structure and increased barrier-crossing probability of the chemical step compared with l-DHFR, indicating temperature-dependent protein vibrational coupling to the chemical step. Protein mass-modulated vibrations in ecDHFR are involved in TS interactions at cold temperatures and are linked to dynamic motions involved in ligand binding at physiological temperatures. Thus, mass effects can affect enzymatic catalysis beyond alterations in promoting vibrations linked to chemistry. Publisher PDF

The authors thank EPSRC for postgraduate studentship awards to JH (EP/ E017851/1) and TK (EP/K503162/1). A simple synthetic autocatalytic replicator is capable of establishing and driving the propagation of a reaction-diffusion front within a 50 µL syringe. This replicator templates its own synthesis through a 1,3-dipolar cycloaddition reaction between a nitrone component, equipped with a 9-ethynylanthracene optical tag, and a maleimide. Kinetic studies using NMR and UV-Vis spectroscopies confirm that the replicator forms ef-ficiently and with high diastereoselectivity and this rep-lication process brings about a dramatic change in opti-cal properties of the sample – a change in the color of the fluorescence in the sample from yellow to blue. The addition of a small amount of the pre-formed replicator at a specific location within a microsyringe, filled with the reaction building blocks, results in the initiation and propagation of a reaction-diffusion front. The realization of a replicator capable of initiating a reaction-diffusion front provides a platform for the examination of inter-connected replicating networks under non-equilibrium conditions involving diffusion processes. Postprint

We thank the Royal Society for a URF (A.D.S.), the ERC under the European Union’s Seventh Framework Programme (FP7/2007-2013, grant agreement no. 279850) (T.H.W.), and EPSRC grant No. EP/J018139/1 (D.S.B.D.) for funding. Benzotetramisole promotes the catalytic asymmetric [2,,3]-rearrangement of allylic quaternary ammonium salts (either isolated or prepared in situ from p-nitrophenyl bromoacetate and the corresponding allylic amine), generating syn-alpha-amino acid derivatives with excellent diastereo- and enantioselectivity (up to >95:5 dr; up to >99% ee). Postprint