Search

The optimization of the photocatalytic properties of hydrothermal Ti[O.sub.2] were obtained through a systematic investigation of the influence of temperature, pH and control of phase composition and particle morphology. The results suggested that there is correlation between particle morphology and photocatalytic activity.

The promising properties of anatase TiO2 nanocrystals exposing specific surfaces have been investigated in depth both theoretically and experimentally. However, a clear assessment of the role of the crystal faces in photocatalytic processes is still under debate. In order to clarify this issue, we have comprehensively explored the properties of the photogenerated defects and in particular their dependence on the exposed crystal faces in shape-controlled anatase. Nanocrystals were synthesized by solvothermal reaction of titanium butoxide in the presence of oleic acid and oleylamine as morphology-directing agents, and their photocatalytic performances were evaluated in the phenol mineralization in aqueous media, using O2 as the oxidizing agent. The charge-trapping centers, Ti3+, O-, and O2-, formed by UV irradiation of the catalyst were detected by electron spin resonance, and their abundance and reactivity were related to the exposed crystal faces and to the photoefficiency of the nanocrystals. In vacuum conditions, the concentration of trapped holes (O- centers) increases with increasing {001} surface area and photoactivity, while the amount of Ti3+ centers increases with the specific surface area of {101} facets, and the highest value occurs for the sample with the worst photooxidative efficacy. These results suggest that {001} surfaces can be considered essentially as oxidation sites with a key role in the photoxidation, while {101} surfaces provide reductive sites which do not directly assist the oxidative processes. Photoexcitation experiments in O2 atmosphere led to the formation of Ti4+-O2- oxidant species mainly located on {101} faces, confirming the indirect contribution of these surfaces to the photooxidative processes. Although this work focuses on the properties of TiO2, we expect that the presented quantitative investigation may provide a new methodological tool for a more effective evaluation of the role of metal oxide crystal faces in photocatalytic processes. [ABSTRACT FROM AUTHOR]

Macroporous WO3 films with inverted opal structure were synthesized by one-step procedure, which involves the self-assembly of the spherical templating agents and the simultaneous sol-gel condensation of the semiconductor alkoxide precursor. Transition metal doping, aimed to enhance the WO3 electrical response, was carried out by including Cr(III) and Pt(IV) centers in the oxide matrix. It turned out that Cr remains as homogeneously dispersed Cr(III) centers inside the WO3 host, while Pt undergoes reduction and aggregation to form nanoclusters located at the oxide surface. Upon interaction with NH3 , the electrical conductivity of transition metal doped-WO3 increases, especially in the presence of Pt dopant, resulting in outstanding sensing properties (S = 110 ± 15 at T = 225 °C and [NH3 ] = 74 ppm). A mechanism was suggested to explain the excellent electrical response of Pt-doped films with respect to the Cr-doped ones. This associates the easy chemisorption of ammonia on the WO3 nanocrystals, promoted by the inverted opal structure, with the catalytic action exerted by the surface Pt nanoclusters on the N-H bond dissociation. The overall results indicate that in Pt-doped WO3 films the effects of the macroporosity positively combine with the electrical sensitization promoted by the metal nanoclusters, thus providing very lightweight materials which display high functionality even at relatively low temperatures. We expect that this synergistic effect can be exploited to realize other functional hierarchical metal oxide structures to be used as gas sensors or catalysts. [ABSTRACT FROM AUTHOR]

Abstract: The possibility of controlling the photocatalytic activity of TiO2 nanoparticles by tailoring their crystalline structure and morphology is a current topic of great interest. In this study, a broad variety of well-faceted particles with different phase compositions, sizes, and shapes have been obtained from concentrated TiOCl2 solutions by systematically changing temperature, pH, and duration of the hydrothermal treatment. The guide to select the suitable experimental conditions was provided by thermodynamic modeling based on available thermochemical data. By combining the results of TEM, HRTEM, XRD, density, and specific surface area measurements, a complete structural and morphological characterization of the particles was performed. Correlation between the photocatalytic activity in the UV photodegradation of phenol solutions and the particle size was established. Prismatic rutile particles with length/width ratio around 5 and breadth of 60–100 nm showed the highest activity. The surface chemistry of the particles was also investigated. Treatments that decrease the surface acidity, such as washing the powders with ammonia solution and/or calcining at 400 °C, have detrimental effect on photocatalytic activity. The overall results suggest correlation between particle morphology and photocatalytic activity and indicate that both electron-hole recombination and adsorption at the surface can be rate-controlling processes. The systematic approach presented in this study demonstrates that a substantial improvement of the photocatalytic activity of TiO2 can be achieved by a careful design of the particle morphology and the control of the surface chemistry. [ABSTRACT FROM AUTHOR]

The promising properties of anatase TiO(2) nanocrystals exposing specific surfaces have been investigated in depth both theoretically and experimentally. However, a clear assessment of the role of the crystal faces in photocatalytic processes is still under debate. In order to clarify this issue, we have comprehensively explored the properties of the photogenerated defects and in particular their dependence on the exposed crystal faces in shape-controlled anatase. Nanocrystals were synthesized by solvothermal reaction of titanium butoxide in the presence of oleic acid and oleylamine as morphology-directing agents, and their photocatalytic performances were evaluated in the phenol mineralization in aqueous media, using O(2) as the oxidizing agent. The charge-trapping centers, Ti(3+), O(-), and O(2)(-), formed by UV irradiation of the catalyst were detected by electron spin resonance, and their abundance and reactivity were related to the exposed crystal faces and to the photoefficiency of the nanocrystals. In vacuum conditions, the concentration of trapped holes (O(-) centers) increases with increasing {001} surface area and photoactivity, while the amount of Ti(3+) centers increases with the specific surface area of {101} facets, and the highest value occurs for the sample with the worst photooxidative efficacy. These results suggest that {001} surfaces can be considered essentially as oxidation sites with a key role in the photoxidation, while {101} surfaces provide reductive sites which do not directly assist the oxidative processes. Photoexcitation experiments in O(2) atmosphere led to the formation of Ti(4+)-O(2)(-) oxidant species mainly located on {101} faces, confirming the indirect contribution of these surfaces to the photooxidative processes. Although this work focuses on the properties of TiO(2), we expect that the presented quantitative investigation may provide a new methodological tool for a more effective evaluation of the role of metal oxide crystal faces in photocatalytic processes.

Macroporous WO(3) films with inverted opal structure were synthesized by one-step procedure, which involves the self-assembly of the spherical templating agents and the simultaneous sol-gel condensation of the semiconductor alkoxide precursor. Transition metal doping, aimed to enhance the WO(3) electrical response, was carried out by including Cr(III) and Pt(IV) centers in the oxide matrix. It turned out that Cr remains as homogeneously dispersed Cr(III) centers inside the WO(3) host, while Pt undergoes reduction and aggregation to form nanoclusters located at the oxide surface. Upon interaction with NH(3), the electrical conductivity of transition metal doped-WO(3) increases, especially in the presence of Pt dopant, resulting in outstanding sensing properties (S = 110 ± 15 at T = 225 °C and [NH(3)] = 74 ppm). A mechanism was suggested to explain the excellent electrical response of Pt-doped films with respect to the Cr-doped ones. This associates the easy chemisorption of ammonia on the WO(3) nanocrystals, promoted by the inverted opal structure, with the catalytic action exerted by the surface Pt nanoclusters on the N-H bond dissociation. The overall results indicate that in Pt-doped WO(3) films the effects of the macroporosity positively combine with the electrical sensitization promoted by the metal nanoclusters, thus providing very lightweight materials which display high functionality even at relatively low temperatures. We expect that this synergistic effect can be exploited to realize other functional hierarchical metal oxide structures to be used as gas sensors or catalysts., (© 2011 American Chemical Society)