Search

Bimetallic Ce/Zr-UiO-66 metal–organic frameworks (MOFs) proved to be promising materials for various catalytic redox applications, representing, together with other bimetallic MOFs, a new generation of porous structures. However, no direct proof for the presence of both metals in a single cornerstone of UiO-type MOFs was reported so far. Employing element-selective X-ray absorption spectroscopy techniques herein, we demonstrate, for the first time, that our synthesis route allows obtaining Ce/Zr-UiO-66 MOFs with desired Ce content and bimetallic CeZr5 cornerstones. Performing multiple-edge extended X-ray absorption fine structure analysis, we determine the exact stoichiometry of the cornerstones, which explains the dependence of thermal and chemical stability of the materials on Ce content.

The direct conversion of methane to methanol (MTM) is a reaction that has the potential to disrupt a great part of the synthesis gas-derived chemical industry. However, despite many decades of research, active enough catalysts and suitable processes for industrial application are still not available. Recently, several copper-exchanged zeolites have shown considerable activity and selectivity in the direct MTM reaction. Understanding the nature of the active site in these materials is essential for any further development in the field. Herein, we apply multivariate curve resolution analysis of X-ray absorption spectroscopy data to accurately quantify the fraction of active Cu in Cu-MOR (MOR = mordenite), allowing an unambiguous determination of the active site nuclearity as a dicopper site. By rationalizing the compositional parameters and reaction conditions, we achieve the highest methanol yield per Cu yet reported for MTM over Cu-zeolites, of 0.47 mol/mol.

Operando-sensitive spectroscopic techniques were employed for investigating the changes in the molecular structure of the Cr sites in the CrVI/SiO2 Phillips catalyst during ethylene polymerization. Practically, the most arduous barrier to be overcome was the separation of the chromates reduction carried out by ethylene from the subsequent polymerization. By carefully tuning the experimental parameters we succeeded in observing these two events separately. We found that the sites involved in ethylene polymerization are mainly divalent Cr ions in a 6-fold coordination, in interaction with the oxygenated byproduct (mostly methylformate, generated from the disproportionation of two formaldehyde molecules). Unreduced CrVI species are also present during ethylene polymerization as well as reduced Cr species (either CrII or CrIII) acting as spectators. Our results challenge the old vision of “naked” chromium species (i.e., low coordinated) as the active sites and attribute a fundamental role to external (and fle...

Extreme toxicity, corrosiveness, and volatility pose serious challenges for the safe storage and transportation of elemental chlorine and bromine, which play critical roles in the chemical industry. Solid materials capable of forming stable nonvolatile compounds upon reaction with elemental halogens may partially mitigate these challenges by allowing safe halogen release on demand. Here we demonstrate that elemental halogens quantitatively oxidize coordinatively unsaturated Co(II) ions in a robust azolate metal–organic framework (MOF) to produce stable and safe-to-handle Co(III) materials featuring terminal Co(III)–halogen bonds. Thermal treatment of the oxidized MOF causes homolytic cleavage of the Co(III)–halogen bonds, reduction to Co(II), and concomitant release of elemental halogens. The reversible chemical storage and thermal release of elemental halogens occur with no significant losses of structural integrity, as the parent cobaltous MOF retains its crystallinity and porosity even after three oxid...

The small-pore Cu-CHA zeolite is today the object of intensive research efforts to rationalize its outstanding performance in the NH3-assisted selective catalytic reduction (SCR) of harmful nitrogen oxides and to unveil the SCR mechanism. Herein we exploit operando X-ray spectroscopies to monitor the Cu-CHA catalyst in action during NH3-SCR in the 150-400 °C range, targeting Cu oxidation state, mobility, and preferential N or O ligation as a function of reaction temperature. By combining operando XANES, EXAFS, and vtc-XES, we unambiguously identify two distinct regimes for the atomic-scale behavior of Cu active-sites. Low-temperature SCR, up to ∼200 °C, is characterized by balanced populations of Cu(I)/Cu(II) sites and dominated by mobile NH3-solvated Cu-species. From 250 °C upward, in correspondence to the steep increase in catalytic activity, the largely dominant Cu-species are framework-coordinated Cu(II) sites, likely representing the active sites for high-temperature SCR.

A novel thorium(IV) metal–organic framework (MOF), Th(2,6-naphtalenedicarboxylate)2, has been synthesized via solvothermal reaction of thorium nitrate and 2,6-naphtalendicarboxilyc acid. This compound shows a new structural arrangement with an interesting topology and an excellent thermal resistance, as the framework is stable in air up to 450 °C. Most notably, this MOF, combining the radioactivity of its metal center and the scintillation property of the ligand, has been proven capable of spontaneous photon emission.

This research was supported through the Center for Gas Separations Relevant to Clean Energy Technologies, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under award DE-SC0001015. We thank Arkema and Gerald K. Branch for fellowship support of E.D.B. and Ateneo Project 2011 ORTO11RRT5 for financial support of S.B., C.L., and S.C. C.L. acknowledges the Mega-grant of the Russian Federation Government number 14.Y26.31.0001 for support. An iron(II)-based metal–organic framework featuring coordinatively unsaturated redox-active metal cation sites, Fe2(dobdc) (dobdc4– = 2,5-dioxido-1,4-benzenedicarboxylate), is shown to strongly bind nitric oxide at 298 K. Adsorption isotherms indicate an adsorption capacity greater than 16 wt %, corresponding to the adsorption of one NO molecule per iron center. Infrared, UV–vis, and Mössbauer spectroscopies, together with magnetic susceptibility data, confirm the strong binding is a result of electron transfer from the FeII sites to form FeIII–NO– adducts. Consistent with these results, powder neutron diffraction experiments indicate that NO is bound to the iron centers of the framework with an Fe–NO separation of 1.77(1) Å and an Fe–N–O angle of 150.9(5)°. The nitric oxide-containing material, Fe2(NO)2(dobdc), steadily releases bound NO under humid conditions over the course of more than 10 days, suggesting it, and potential future iron(II)-based metal–organic frameworks, are good candidates for certain biomedical applications. Postprint

Operando-sensitive spectroscopic techniques were employed for investigating the changes in the molecular structure of the Cr sites in the Cr

Aluminum complexes of enantiomerically pure aminomethylpyrrolidine-based salalen ligands and their application in the stereoselective polymerization of lactide are described. Poly(lactic acid) featuring the new gradient isotactic multiblock microstructure was synthesized by isoselective catalysts, which operate by a combination of enantiomorphic-site and chain-end control mechanisms.

Dealumination of NH(4)-Y zeolite during steaming to 873 K was investigated with in situ, time-dependent, synchrotron radiation XRPD and in situ Al K-edge XAS. Water desorption is complete at 450 K, and ammonium decomposition occurs between 500 and 550 K. Only a small fraction of Al(3+) species (5%) leaves the framework during heating from 710 to 873 K; these species occupy site I' inside the sodalite cage. This fraction increases up to 8% in the first 50 min at 873 K and remains constant for the following 70 min isotherm and during the high-temperature part of the cooling experiment. During cooling from 500 to 450 K, the electron density at site I' increases suddenly, corresponding to a fraction of 30-35% of the total Al, confirmed by ex situ (27)Al MAS solid-state NMR. At that temperature, in situ Al K-edge XAS indicates a change in Al coordination of a large fraction of Al, and thermogravimetric (TG) data show the first water molecules start to repopulate the pores. Such molecules drive the dislodgment of most of the Al from the zeolitic framework. Our data indicate that considerable structural collapse caused by steaming does not occur at the highest temperature; however, defects form, which lead to significant migration of framework Al(3+) to extraframework positions, which occurs only as water is able to enter the pores again, that is, at much lower temperature. Contrary to general opinion, these results demonstrate that zeolite dealumination is not primarily a high-temperature process. The standard Rietveld refinement approach failed to identify extraframework Al species. These new results were obtained by adopting the innovative parametric refinement [J. Appl. Crystallogr. 2007, 40, 87]. Treating all of the XRPD patterns collected during the evolution of temperature as one unique data set significantly reduces the overall number of optimized variables and, thus, their relative correlation, and finally results in a more reliable estimate of the optimized parameters. Our results contribute to a better understanding of the phenomena involved on the atomic scale in the preparation of ultrastable Y zeolites (USY). USY are employed in fluid catalytic cracking (FCC), which is the most important conversion process in petroleum refineries to convert the high-boiling hydrocarbon fractions of petroleum crude oils to more valuable products like gasoline and olefinic gases.

SrFeO(2.5) and SrCoO(2.5) are able to intercalate oxygen in a reversible topotactic redox reaction already at room temperature to form the cubic perovskites Sr(Fe,Co)O(3), while CaFeO(2.5) can only be oxidized under extreme conditions. To explain this significant difference in low temperature oxygen mobility, we investigated the homologous SrFeO(2.5) and CaFeO(2.5) by temperature dependent oxygen isotope exchange as well as by inelastic neutron scattering (INS) studies, combined with ab initio (DFT) molecular dynamical calculations. From (18)O/(16)O isotope exchange experiments we proved free oxygen mobility to be realized in SrFeO(x) already below 600 K. We have also evidence that low temperature oxygen mobility relies on the existence of specific, low energy lattice modes, which trigger and amplify oxygen mobility in solids. We interpret the INS data together with the DFT-based molecular dynamical simulation results on SrFeO(2.5) and CaFeO(2.5) in terms of an enhanced, phonon-assisted, low temperature oxygen diffusion for SrFeO(3-x) as a result of the strongly reduced Fe-O-Fe bond strength of the apical oxygen atoms in the FeO(6) octahedra along the stacking axis. This dynamically triggered phenomenon leads to an easy migration of the oxide ions into the open vacancy channels and vice versa. The decisive impact of lattice dynamics, giving rise to structural instabilities in oxygen deficient perovskites, especially with brownmillerite-type structure, is demonstrated, opening new concepts for the design and tailoring of low temperature oxygen ion conductors.

Electrochemical oxidation of the antiferromagnetically ordered SrCoO(2.5), with brownmillerite-type structure, to the cubic ferromagnet SrCoO(3), with perovskite structure, has been investigated in situ by neutron diffraction as well as by X-ray absorption fine structure (XAFS) spectroscopy in specially designed electrochemical cells. The neutron diffraction experiments were performed twice, using two different wavelengths (lambda = 1.2921(2) and 4.74 A) in order to better discriminate structural and magnetic changes as functions of the charge transfer. From the neutron diffraction experiments, two intermediate phases, SrCoO(2.75) and SrCoO(2.82)(+/-)(0.07), were characterized. No superstructure reflections were observed for the corresponding SrCoO(2.75) phase. Instead we observed here, for the first time, 3D oxygen ordering during an oxygen intercalation reaction, as established for SrCoO(2.82)(+/-)(0.07), which can be described as a tetragonal unit cell, related to the perovskite cell by a approximately 2(a radical2) and c approximately 2a. The structure of this intermediate phase confirms the strongly topotactic character of the oxygen intercalation reaction. We were also able to prove, from in situ XAFS spectroscopy at the Co absorption edge, that the evolution of the Co valence state from formally +3 for SrCoO(2.5) to +4 for the final reaction product (SrCoO(3.0)) does not proceed continuously but gives evidence for the formation of O(-) species for stoichiometries corresponding to SrCoO(2.82)(+/-)(0.07). The use of neutrons (vs X-rays) in the diffraction experiments and the choice of the transmission (vs fluorescence) mode in the XAFS experiment guarantee that the obtained data well represent bulk and not just surface properties.

MOF-5 is the archetype metal-organic framework and has been subjected to numerous studies the past few years. The focal point of this report is the pitfalls related to the MOF-5 phase identification based on powder XRD data. A broad set of conditions and procedures have been reported for MOF-5 synthesis. These variations have led to materials with substantially different adsorption properties (specific surface areas in the range 700 to 3400 m(2)/g). The relatively low weight loss observed for some as synthesized samples upon solvent removal is also indicative of a low pore volume. Regrettably, these materials have all been described as MOF-5 without any further comments. Furthermore, the reported powder XRD patterns hint at structural differences: The variations in surface area are accompanied by peak splitting phenomena and rather pronounced changes in the relative peak intensities in the powder XRD patterns. In this work, we use single-crystal XRD to investigate structural differences between low and high surface area MOF-5. The low surface area MOF-5 sample had two different classes of crystals. For the dominant phase, Zn(OH)2 species partly occupied the cavities. The presence of Zn species makes the hosting cavity and possibly also adjacent cavities inaccessible and thus efficiently reduces the pore volume of the material. Furthermore, the minor phase consisted of doubly interpenetrated MOF-5 networks, which lowers the adsorption capacity. The presence of Zn species and lattice interpenetration changes the symmetry from cubic to trigonal and explains the peak splitting observed in the powder XRD patterns. Pore-filling effects from the Zn species (and partly the solvent molecules) are also responsible for the pronounced variations in powder XRD peak intensities. This latter conclusion is particularly useful for predicting the adsorption properties of a MOF-5-type material from powder XRD.

In recent times, it has been shown that the microporous ETS-10 titanosilicate can be used as a shape-selective photocatalyst for the decomposition of aromatic molecules (Chem. Commun. 2001, 2131). Its actual use on practical grounds is however discouraged by its too low activity, when compared with that of TiO(2) photocatalysts. In the present work, we show how an ad hoc mild treatment with HF enhances the activity of ETS-10 toward the photodegradation of large aromatic molecules that are unable to penetrate inside the zeolitic pores, such as 2,5-dichlorophenol, 2,4,5-trichlorophenol, 1,3,5-trihydroxybenzene, and 2,3-dihydroxynaphthalene (DHN). The photoactivity of the acid-treated materials is comparable or even greater than that of the nonselective TiO(2) catalyst. Moreover, the enhancement of the photoactivity is accompanied by a remarkable parallel increase of the shape selectivity, particularly toward DHN (k(DHN)/k(P) = 127, where P = phenol). A complete characterization (by means of X-ray diffraction, scanning electron microscopy, transmission electron microscopy, ultraviolet-visible spectroscopy, and X-ray aborption spectroscopy techniques) of a set of ETS-10 samples which have undergone a progressively severe HF treatment allows us to propose an explanation of the photocatalytic activity and selectivity of the modified materials.

A thorough analysis of the vibrational features of the titanium silicalite-1 (TS-1) catalyst is presented, based on quantitative IR measurements, Raman and resonant Raman experiments, quantitative XANES, and quantum chemical calculations on cluster and periodic models. The linear correlation of the intensity of the IR and Raman bands located at 960 and 1125 cm(-1) and the XANES peak at 4967 eV with the amount of tetrahedral Ti are quantitatively demonstrated. Raman and resonant Raman spectra of silicalite and TS-1 with variable Ti content are presented, showing main features at 960 and 1125 cm(-1) associated with titanium insertion into the zeolite framework. The enhancement of the intensity of the 1125 cm(-1) feature and the invariance of the 960 cm(-1) feature in UV-Raman experiments, are discussed in terms of resonant Raman selection rules. Quantum chemical calculations on cluster models Si[OSi(OH)(3)](4) and Ti[OSi(OH)(3)](4) at the B3LYP/6-31G(d) level of theory provide the basis for the assignment of the main vibrational contributions and for the understanding of Raman enhancement. The resonance-enhanced 1125 cm(-1) mode is unambiguously associated with a totally symmetric vibration of the TiO(4) tetrahedron, achieved through in-phase antisymmetric stretching of the four connected Ti-O-Si bridges. This vibration can also be described as a totally symmetric stretching of the four Si-O bonds pointing toward Ti. The resonance enhancement of this feature is explained in terms of the electronic structure of the Ti-containing moiety. Asymmetric stretching modes of TO(4) units show distinct behavior when (i) T is occupied by Si as in perfect silicalite, (ii) T is occupied by Ti as in TS-1, or (iii) the oxygen atom belongs to an OH group, such as in terminal tetrahedra of cluster models and in real defective zeolites. Asymmetric SiO(4) and TiO(4) stretching modes appear above and below 1000 cm(-1), respectively, when they are achieved through antisymmetric stretching of the T-O-Si bridges, and around 800 cm(-1) (in both SiO(4) and TiO(4)) when they involve symmetric stretching of the T-O-Si units. In purely siliceous models, the transparency gap between the main peaks at 800 and 1100 cm(-1) contains only vibrational features associated with terminal Si-OH groups, while in Ti-containing models it contains also the above-mentioned asymmetric TiO(4) modes, which in turn are strongly coupled with Si-OH stretching modes. Calculations on periodic models of silicalite and TS-1 free of OH groups using the QMPOT embedding method correctly reproduce the transparency gap of silicalite and the appearance of asymmetric TiO(4) vibrations at 960 cm(-1) in TS-1. Finally, we demonstrate, for the first time, that the distortion of the tetrahedral symmetry around Ti caused by water adsorption quenches the UV-Raman enhancement of the 1125 cm(-1) band.