Search

The oxygen evolution reaction (OER) provides the protons for many electrocatalytic power-to-X processes, such as the production of green hydrogen from water or methanol from CO 2 . Iridium oxohydroxides (IOHs) are outstanding catalysts for this reaction because they strike a unique balance between activity and stability in acidic electrolytes. Within IOHs, this balance varies with the atomic structure. While amorphous IOHs perform best, they are least stable. The opposite is true for their crystalline counterparts. These rules-of-thumb are used to reduce the loading of scarce IOH catalysts and retain the performance. However, it is not fully understood how activity and stability are related at the atomic level, hampering rational design. Herein, we provide simple design rules (Figure 12) derived from the literature and various IOHs within this study. We chose crystalline IrOOH nanosheets as our lead material because they provide excellent catalyst utilization and a predictable structure. We found that IrOOH signals the chemical stability of crystalline IOHs while surpassing the activity of amorphous IOHs. Their dense bonding network of pyramidal trivalent oxygens (μ 3Δ -O) provides structural integrity, while allowing reversible reduction to an electronically gapped state that diminishes the destructive effect of reductive potentials. The reactivity originates from coordinative unsaturated edge sites with radical character, i.e., μ 1 -O oxyls. By comparing to other IOHs and literature, we generalized our findings and synthesized a set of simple rules that allow prediction of stability and reactivity of IOHs from atomistic models. We hope that these rules will inspire atomic design strategies for future OER catalysts.

The direct coupling of light harvesting and charge storage in a single material opens new avenues to light storing devices. Here we demonstrate the decoupling of light and dark reactions in the two-dimensional layered niobium tungstate (TBA) + (NbWO 6 ) - for on-demand hydrogen evolution and solar battery energy storage. Light illumination drives Li + /H + photointercalation into the (TBA) + (NbWO 6 ) - photoanode, leading to small polaron formation assisted by structural distortions on the WO x sublattice, along with a light-induced decrease in material resistance over 2 orders of magnitude compared to the dark. The photogenerated electrons can be extracted on demand to produce solar hydrogen upon the addition of a Pt catalyst. Alternatively, they can be stored for over 20 h under oxygen-free conditions after 365 nm UV illumination for only 10 min, thus featuring a solar battery anode with promising capacity and long-term stability. The optoionic effects described herein offer new insights to overcome the intermittency of solar irradiation, while inspiring applications at the interface of solar energy conversion and energy storage, including solar batteries, "dark" photocatalysis, solar battolyzers, and photomemory devices.

Polar and chiral crystal symmetries confer a variety of potentially useful functionalities upon solids by coupling otherwise noninteracting mechanical, electronic, optical, and magnetic degrees of freedom. We describe two phases of the 3D perovskite, CsSnBr 3 , which emerge below 85 K due to the formation of Sn(II) lone pairs and their interaction with extant octahedral tilts. Phase II (77 K < T < 85 K, space group P 2 1 / m ) exhibits ferroaxial order driven by a noncollinear pattern of lone pair-driven distortions within the plane normal to the unique octahedral tilt axis, preserving the inversion symmetry observed at higher temperatures. Phase I ( T < 77 K, space group P 2 1 ) additionally exhibits ferroelectric order due to distortions along the unique tilt axis, breaking both inversion and mirror symmetries. This polar and chiral phase exhibits second harmonic generation from the bulk and pronounced electrostriction and negative thermal expansion along the polar axis ( Q 22 ≈ 1.1 m 4 C -2 ; α b = -7.8 × 10 -5 K -1 ) through the onset of polarization. The structures of phases I and II were predicted by recursively following harmonic phonon instabilities to generate a tree of candidate structures and subsequently corroborated by synchrotron X-ray powder diffraction and polarized Raman and 81 Br nuclear quadrupole resonance spectroscopies. Preliminary attempts to suppress unintentional hole doping to allow for ferroelectric switching are described. Together, the polar symmetry, small band gap, large spin-orbit splitting of Sn 5p orbitals, and predicted strain sensitivity of the symmetry-breaking distortions suggest bulk samples and epitaxial films of CsSnBr 3 or its neighboring solid solutions as candidates for bulk Rashba effects.

Single-site photocatalysts (SSPCs) are well-established as potent platforms for designing innovative materials to accomplish direct solar-to-fuel conversion. Compared to classical inorganic porous materials, such as zeolites and silica, covalent organic frameworks (COFs)─an emerging class of porous polymers that combine high surface areas, structural diversity, and chemical stability─are attractive candidates for SSPCs due to their molecular-level precision and intrinsic light harvesting ability, both amenable to structural engineering. In this Perspective, we summarize the design concepts and state-of-the-art strategies for the construction of COF SSPCs, and we review the development of COF SSPCs and their applications in solar-to-fuel conversion from their inception. Underlying pitfalls concerning photocatalytic characterization are discussed, and perspectives for the future development of this burgeoning field are given.

Herein, we report a facile postsynthetic linkage conversion method giving synthetic access to nitrone-linked covalent organic frameworks (COFs) from imine- and amine-linked COFs. The new two-dimensional (2D) nitrone-linked covalent organic frameworks, NO-PI-3-COF and NO-TTI-COF, are obtained with high crystallinity and large surface areas. Nitrone-modified pore channels induce condensation of water vapor at 20% lower humidity compared to their amine- or imine-linked precursor COFs. Thus, the topochemical transformation to nitrone linkages constitutes an attractive approach to postsynthetically fine-tune water adsorption properties in framework materials.

The outstanding diversity of Zr-based frameworks is inherently linked to the variable coordination geometry of Zr-oxo clusters and the conformational flexibility of the linker, both of which allow for different framework topologies based on the same linker-cluster combination. In addition, intrinsic structural disorder provides a largely unexplored handle to further expand the accessibility of novel metal-organic framework (MOF) structures that can be formed. In this work, we report the concomitant synthesis of three topologically different MOFs based on the same M 6 O 4 (OH) 4 clusters (M = Zr or Hf) and methane-tetrakis( p -biphenyl-carboxylate) (MTBC) linkers. Two novel structural models are presented based on single-crystal diffraction analysis, namely, cubic c-(4,12)MTBC-M 6 and trigonal tr-(4,12)MTBC-M 6 , which comprise 12-coordinated clusters and 4-coordinated tetrahedral linkers. Notably, the cubic phase features a new architecture based on orientational cluster disorder, which is essential for its formation and has been analyzed by a combination of average structure refinements and diffuse scattering analysis from both powder and single-crystal X-ray diffraction data. The trigonal phase also features structure disorder, although involving both linkers and secondary building units. In both phases, remarkable geometrical distortion of the MTBC linkers illustrates how linker flexibility is also essential for their formation and expands the range of achievable topologies in Zr-based MOFs and its analogues.

Covalent organic frameworks (COFs) have emerged as versatile platforms for the separation and storage of hazardous gases. Simultaneously, the synthetic toolbox to tackle the "COF trilemma" has been diversified to include topochemical linkage transformations and post-synthetic stabilization strategies. Herein, we converge these themes and reveal the unique potential of nitric oxide (NO) as a new reagent for the scalable gas-phase transformation of COFs. Using physisorption and solid-state nuclear magnetic resonance spectroscopy on 15 N-enriched COFs, we study the gas uptake capacity and selectivity of NO adsorption and unravel the interactions of NO with COFs. Our study reveals the clean deamination of terminal amine groups on the particle surfaces by NO, exemplifying a unique surface passivation strategy for COFs. We further describe the formation of a NONOate linkage by the reaction of NO with an amine-linked COF, which shows controlled release of NO under physiological conditions. NONOate-COFs thus show promise as tunable NO delivery platforms for bioregulatory NO release in biomedical applications.

As covalent organic frameworks (COFs) are coming of age, the lack of effective approaches to achieve crystalline and centimeter-scale-homogeneous COF films remains a significant bottleneck toward advancing the application of COFs in optoelectronic devices. Here, we present the synthesis of colloidal COF nanoplates, with lateral sizes of ∼200 nm and average heights of 35 nm, and their utilization as photocathodes for solar hydrogen evolution. The resulting COF nanoplate colloid exhibits a unimodal particle-size distribution and an exceptional colloidal stability without showing agglomeration after storage for 10 months and enables smooth, homogeneous, and thickness-tunable COF nanofilms via spin coating. Photoelectrodes comprising COF nanofilms were fabricated for photoelectrochemical (PEC) solar-to-hydrogen conversion. By rationally designing multicomponent photoelectrode architectures including a polymer donor/COF heterojunction and a hole-transport layer, charge recombination in COFs is mitigated, resulting in a significantly increased photocurrent density and an extremely positive onset potential for PEC hydrogen evolution (over +1 V against the reversible hydrogen electrode), among the best of classical semiconductor-based photocathodes. This work thus paves the way toward fabricating solution-processed large-scale COF nanofilms and heterojunction architectures and their use in solar-energy-conversion devices.

Covalent organic frameworks (COFs) with a pore size beyond 5 nm are still rarely seen in this emerging field. Besides obvious complications such as the elaborated synthesis of large linkers with sufficient solubility, more subtle challenges regarding large-pore COF synthesis, including pore occlusion and collapse, prevail. Here we present two isoreticular series of large-pore imine COFs with pore sizes up to 5.8 nm and correlate the interlayer interactions with the structure and thermal behavior of the COFs. By adjusting interlayer interactions through the incorporation of methoxy groups acting as pore-directing "anchors", different stacking modes can be accessed, resulting in modified stacking polytypes and, hence, effective pore sizes. A strong correlation between stacking energy toward highly ordered, nearly eclipsed structures, higher structural integrity during thermal stress, and a novel, thermally induced phase transition of stacking modes in COFs was found, which sheds light on viable design strategies for increased structural control and stability in large-pore COFs.

Covalent organic frameworks have emerged as a powerful synthetic platform for installing and interconverting dedicated molecular functions on a crystalline polymeric backbone with atomic precision. Here, we present a novel strategy to directly access amine-linked covalent organic frameworks, which serve as a scaffold enabling pore-wall modification and linkage-interconversion by new synthetic methods based on Leuckart-Wallach reduction with formic acid and ammonium formate. Frameworks connected entirely by secondary amine linkages, mixed amine/imine bonds, and partially formylated amine linkages are obtained in a single step from imine-linked frameworks or directly from corresponding linkers in a one-pot crystallization-reduction approach. The new, 2D amine-linked covalent organic frameworks, rPI-3-COF, rTTI-COF, and rPy1P-COF, are obtained with high crystallinity and large surface areas. Secondary amines, installed as reactive sites on the pore wall, enable further postsynthetic functionalization to access tailored covalent organic frameworks, with increased hydrolytic stability, as potential heterogeneous catalysts.

Covalent organic frameworks (COFs) display a unique combination of chemical tunability, structural diversity, high porosity, nanoscale regularity, and thermal stability. Recent efforts are directed at using such frameworks as tunable scaffolds for chemical reactions. In particular, COFs have emerged as viable platforms for mimicking natural photosynthesis. However, there is an indisputable need for efficient, stable, and economical alternatives for the traditional platinum-based cocatalysts for light-driven hydrogen evolution. Here, we present azide-functionalized chloro(pyridine)cobaloxime hydrogen-evolution cocatalysts immobilized on a hydrazone-based COF-42 backbone that show improved and prolonged photocatalytic activity with respect to equivalent physisorbed systems. Advanced solid-state NMR and quantum-chemical methods allow us to elucidate details of the improved photoreactivity and the structural composition of the involved active site. We found that a genuine interaction between the COF backbone and the cobaloxime facilitates recoordination of the cocatalyst during the photoreaction, thereby improving the reactivity and hindering degradation of the catalyst. The excellent stability and prolonged reactivity make the herein reported cobaloxime-tethered COF materials promising hydrogen evolution catalysts for future solar fuel technologies.

Solar hydrogen (H 2 ) evolution from water utilizing covalent organic frameworks (COFs) as heterogeneous photosensitizers has gathered significant momentum by virtue of the COFs' predictive structural design, long-range ordering, tunable porosity, and excellent light-harvesting ability. However, most photocatalytic systems involve rare and expensive platinum as the co-catalyst for water reduction, which appears to be the bottleneck in the development of economical and environmentally benign solar H 2 production systems. Herein, we report a simple, efficient, and low-cost all-in-one photocatalytic H 2 evolution system composed of a thiazolo[5,4- d ]thiazole-linked COF ( TpDTz ) as the photoabsorber and an earth-abundant, noble-metal-free nickel-thiolate hexameric cluster co-catalyst assembled in situ in water, together with triethanolamine (TEoA) as the sacrificial electron donor. The high crystallinity, porosity, photochemical stability, and light absorption ability of the TpDTz COF enables excellent long-term H 2 production over 70 h with a maximum rate of 941 μmol h -1 g -1 , turnover number TON Ni > 103, and total projected TON Ni > 443 until complete catalyst depletion. The high H 2 evolution rate and TON, coupled with long-term photocatalytic operation of this hybrid system in water, surpass those of many previously known organic dyes, carbon nitride, and COF-sensitized photocatalytic H 2 O reduction systems. Furthermore, we gather unique insights into the reaction mechanism, enabled by a specifically designed continuous-flow system for non-invasive, direct H 2 production rate monitoring, providing higher accuracy in quantification compared to the existing batch measurement methods. Overall, the results presented here open the door toward the rational design of robust and efficient earth-abundant COF-molecular co-catalyst hybrid systems for sustainable solar H 2 production in water.

Three-dimensional carbon-based structures have proven useful for tailoring material properties in structural mechanical and energy storage applications. One approach to obtain them has been by carbonization of selected metal-organic frameworks (MOFs) with catalytic metals, but this is not applicable to most common MOF structures. Here, we present a strategy to transform common MOFs, by guest inclusions and high-temperature MOF-guest interactions, into complex carbon-based, diatom-like, hierarchical structures (named for the morphological similarities with the naturally existing diatomaceous species). As an example, we introduce metal salt guests into HKUST-1-type MOFs to generate a family of carbon-based nano-diatoms with two to four levels of structural hierarchy. We report control of the morphology by simple changes in the chemistry of the MOF and guest, with implications for the formation mechanisms. We demonstrate that one of these structures has unique advantages as a fast-charging lithium-ion battery anode. The tunability of composition should enable further studies of reaction mechanisms and result in the growth of a myriad of unprecedented carbon-based structures from the enormous variety of currently available MOF-guest candidates.

We demonstrate photocatalytic hydrogen evolution using COF photosensitizers with molecular proton reduction catalysts for the first time. With azine-linked N2-COF photosensitizer, chloro(pyridine)cobaloxime co-catalyst, and TEOA donor, H 2 evolution rate of 782 μmol h -1 g -1 and TON of 54.4 has been obtained in a water/acetonitrile mixture. PXRD, solid-state spectroscopy, EM analysis, and quantum-chemical calculations suggest an outer sphere electron transfer from the COF to the co-catalyst which subsequently follows a monometallic pathway of H 2 generation from the Co III -hydride and/or Co II -hydride species.

Solar water-splitting represents an important strategy toward production of the storable and renewable fuel hydrogen. The water oxidation half-reaction typically proceeds with poor efficiency and produces the unprofitable and often damaging product, O2. Herein, we demonstrate an alternative approach and couple solar H2 generation with value-added organic substrate oxidation. Solar irradiation of a cyanamide surface-functionalized melon-type carbon nitride ((NCN)CNx) and a molecular nickel(II) bis(diphosphine) H2-evolution catalyst (NiP) enabled the production of H2 with concomitant selective oxidation of benzylic alcohols to aldehydes in high yield under purely aqueous conditions, at room temperature and ambient pressure. This one-pot system maintained its activity over 24 h, generating products in 1:1 stoichiometry, separated in the gas and solution phases. The (NCN)CNx-NiP system showed an activity of 763 μmol (g CNx)(-1) h(-1) toward H2 and aldehyde production, a Ni-based turnover frequency of 76 h(-1), and an external quantum efficiency of 15% (λ = 360 ± 10 nm). This precious metal-free and nontoxic photocatalytic system displays better performance than an analogous system containing platinum instead of NiP. Transient absorption spectroscopy revealed that the photoactivity of (NCN)CNx is due to efficient substrate oxidation of the material, which outweighs possible charge recombination compared to the nonfunctionalized melon-type carbon nitride. Photoexcited (NCN)CNx in the presence of an organic substrate can accumulate ultralong-lived "trapped electrons", which allow for fuel generation in the dark. The artificial photosynthetic system thereby catalyzes a closed redox cycle showing 100% atom economy and generates two value-added products, a solar chemical, and solar fuel.

This work focuses on the control of the polymerization process for melon ("graphitic carbon nitride"), with the aim of improving its photocatalytic activity intrinsically. We demonstrate here that reduction of the synthesis temperature leads to a mixture of the monomer melem and its higher condensates. We show that this mixture can be separated and provide evidence that the higher condensates are isolated oligomers of melem. On evaluating their photocatalytic activity for hydrogen evolution, the oligomers were found to be the most active species, having up to twice the activity of the monomer/oligomer mixture of the as-synthesized material, which in turn has 3 times the activity of the polymer melon, the literature benchmark. These results highlight the role of "defects", i.e., chain terminations, in increasing the catalytic activity of carbon nitrides and at the same time point to the ample potential of intrinsically improving the photocatalytic activity of "carbon nitride", especially through the selective synthesis of the active phase.

Nanosheets of a crystalline 2D carbon nitride were obtained by ionothermal synthesis of the layered bulk material poly(triazine imide), PTI, followed by one-step liquid exfoliation in water. Triazine-based nanosheets are 1-2 nm in height and afford chemically and colloidally stable suspensions under both basic and acidic conditions. We use solid-state NMR spectroscopy of isotopically enriched, restacked nanosheets as a tool to indirectly monitor the exfoliation process and carve out the chemical changes occurring upon exfoliation, as well as to determine the nanosheet thickness. PTI nanosheets show significantly enhanced visible-light driven photocatalytic activity toward hydrogen evolution compared to their bulk counterpart, which highlights the crucial role of morphology and surface area on the photocatalytic performance of carbon nitride materials.

Low-dimensional nanostructures offer a host of intriguing properties which are distinct from those of the bulk material, owing to size-confinement effects and amplified surface areas. Here, we report on the scalable, bottom-up synthesis of ultrathin coordination polymer nanosheets via surfactant-mediated synthesis and subsequent exfoliation. Layers of a two-dimensional (2D) zinc coordination polymer are self-assembled in the interlamellar space of a reverse microemulsion mesophase into stacks of nanosheets interleaved with cethyltrimethylammonium bromide (CTAB) at regular intervals, thus giving rise to a lamellar hybrid mesostructure with a lattice period of ~8 nm and an underlying highly crystalline substructure. The basic structural motif is composed of 2D acetato-benzimidazolato-zinc layers of tetrahedrally coordinated zinc joined together by anionic acetate and benzimidazolate ligands. The hierarchical structure was studied by PXRD, TEM, EDX, EELS, AFM, and solid-state NMR spectroscopy, revealing a high level of order on both the atomic and mesoscale, suggesting fairly strong interactions along the organic-inorganic hybrid interface. Exfoliation of the hybrid material in organic solvents such as THF and chloroform yields sheet- and belt-like nanostructures with lateral sizes between 10's and 100's of nanometers and a height of about 10 nm measured by AFM, which precisely maps the basal spacing of the lamellar mesostructure; further exfoliation results in nanobelts with minimum sizes around 4 nm. Finally, the sheetlike nanostructures behave as morphological chameleons, transforming into highly regular multiwalled coordination polymer nanotubes upon treatment with organic solvents.

Hierarchically structured "all-clay" 1D and 3D inverse photonic crystals were fabricated, featuring the crystalline layered microstructure of the phyllosilicate Laponite combined with crystalline macroporosity on the submicron scale. By using simple hard-templating protocols based on monodisperse polystyrene spheres, periodic layered silicate and inverse opal architectures with photonic crystal properties are accessible, which exhibit reflectivities of the stop band in excess of 50%. The combination of intrinsic chemical functionality with structural color makes such hierarchical "all-clay" architectures potential scaffolds in color-tunable chemo-optical devices.