Search

Structural elucidation of 2D polymer monolayers proving long-range order is a challenge that limits the pace in which this recent field of polymer chemistry and of synthetic 2D materials develops. To overcome this bottleneck, we here present a method in which tip-enhanced Raman spectroscopy is combined with a random growth crystallization model to obtain global features from local spectroscopic information. Concretely, we prove the nature and determine the conversion number X of the cross-links for two new 2D homopolymers and one (of three) new 2D copolymers. Assuming random and in-plane growth, our model results in crystallinity degrees of 93.1% to 99.7% and mean radii of defect-free crystalline areas of 3-15 nm for conversion numbers of 84% < X < 98%. Thus, we provide strong evidence for the synthetic monolayer 2D materials presented that they qualify as 2D polymers and are therefore perfectly suited for in-depth studies both in a more fundamental direction as well as toward application. This example shows how our method can affect current research on covalent sheets.

The single-crystal-to-single-crystal (scsc) synthesis of a 2D polymer based on photochemically triggered [2 + 2]-cycloaddition is reported. Both monomer and polymer single crystals are analyzed by X-ray diffraction, which is the first case of a scsc two-dimensional polymerization based on this cycloaddition and the third ever case for a scsc synthesis of a 2D polymer. The product crystals at quantitative conversion are wet-exfoliated under mild conditions and afford countless features that are single and double layers as judged by their AFM heights of h AFM ≈ 1.2 ± 0.5 and 2.2 ± 0.5 nm, respectively. The X-ray-structure-based molecular weight of the 2D polymers and their degree of polymerization per μm 2 are M = 360 MDa and P n = 464 900, respectively. The sheet size is on the order of 5 × 5 μm 2 .

This work proves the existence and chemical addressability of defined edge groups of a 2D polymer. Pseudohexagonally prismatic single crystals consisting of layered stacks of a 2D polymer are used. They should expose anthracene-based edge groups at the six (100) but not at the two pseudohexagonal (001) and (001̅) faces. The crystals are reacted with the isotopically enriched dienophiles maleic anhydride and a C18-alkyl chain-modified maleimide. In both cases the corresponding Diels-Alder adducts between these reagents and the edge groups are formed as confirmed by solid state NMR spectroscopy. The same applies to a maleimide derivative carrying a BODIPY dye which was chosen for its fluorescence to be out of the range of the self-fluorescence of the 2D polymer crystals stemming from contained template molecules. If the crystals are excited at λ = 633 nm, their (100) faces and thus their rims fluoresce brightly, while the pseudohexagonal faces remain silent. This is visible when the crystals lie on a pseudohexagonal face. Lambda-mode laser scanning microscopy confirms this fluorescence to originate from the BODIPY dye. Micromechanical exfoliation of the dye-modified crystals results in thinner sheet packages which still exhibit BODIPY fluorescence right at the rim of these packages. This work establishes the chemical nature of the edge groups of a 2D polymer and is also the first implementation of an edge group modification similar to end group modifications of linear polymers.

We present the synthesis of a two-dimensional polymer at the air/water interface and its nm-resolution imaging. Trigonal star, amphiphilic monomers bearing three anthraceno groups on a central triptycene core are confined at the air/water interface. Compression followed by photopolymerization on the interface provides the two-dimensional polymer. Analysis by scanning tunneling microscopy suggests that the polymer is periodic with ultrahigh pore density.

Monolayer sheets have gained attention due to the unique properties derived from their two-dimensional structure. One of the key challenges in sheet modification/synthesis is to exchange integral parts while keeping them intact. We describe site-to-site transmetalation of Zn(2+) in the netpoints of cm(2)-sized, metal-organic sheets by Fe(2+), Co(2+), and Pb(2+). This novel transformation was done both randomly and at predetermined patterns defined by photolithography to create monolayer sheets composed of different netpoints. All transmetalated sheets are mechanically strong enough to be spanned over 20 × 20 μm(2) sized holes. Density functional theory calculations provide both a model for the molecular structure of an Fe(2+)-based sheet and first insights into how transmetalation proceeds. Such transmetalated sheets with random and patterned netpoints can be considered as two-dimensional analogues of linear copolymers. Their nanoscale synthesis presents an advance in monolayer/polymer chemistry with applications in fields such as surface coating, molecular electronics, device fabrication, imaging, and sensing.

A two-dimensional polymer (2DP) based on the dimerization of anthraceno groups arranged in a triptycene motif is reported. A photoinduced polymerization is performed in the crystalline state and gives a lamellar 2DP via a crystal-to-crystal (but not single-crystal to single-crystal) transformation. Solvent-induced exfoliation provides monolayer sheets of the 2DP. The 2DP is considered to be a tiling, a mathematical approach that facilitates structural elucidation.

A hybrid structure of a synthetic dendronized polymer, two different types of enzymes (superoxide dismutase and horseradish peroxidase), and a fluorescent dye (fluorescein) was synthesized. Thereby, a single polymer chain carried multiple copies of the two enzymes and the fluorescein. The entire attachment chemistry is based on UV/vis-quantifiable bis-aryl hydrazone bond formation that allows direct quantification of bound molecules: 60 superoxide dismutase, 120 horseradish peroxidase, and 20 fluorescein molecules on an average polymer chain of 2000 repeating units. To obtain other enzyme ratios the experimental conditions were altered accordingly. Moreover, it could be shown that both enzymes remained fully active and catalyzed a two-step cascade reaction.

A macrocyclic monomer with two opposing 1,8-diazaanthracene units is polymerized in a single crystal by a photochemically induced [4 + 4] cycloaddition reaction between neighboring monomers in which the anthracene units are stacked face-to-face at the critical Schmidt distance. The severe structural changes associated with this are minimized by the monomer design, wherein the linkers between the two opposing photoreactive 1,8-diazaanthracene units are connected to the 4 and 5 positions of the latter, whose spatial positioning is changed the least during dimerization. This helps to keep the monomer's overall shape basically unchanged during the polymerization. The resulting new rigid-rod polymer is soluble in its protonated form, and after counterion exchange with a surfactant, it can be depolymerized back into monomer upon relatively mild thermal treatment (120 °C) in an organic solvent.

This work covers the synthesis of second-generation, ethylene glycol dendrons covalently linked to a surface anchor that contains two, three, or four catechol groups, the molecular assembly in aqueous buffer on titanium oxide surfaces, and the evaluation of the resistance of the monomolecular adlayers against nonspecific protein adsorption in contact with full blood serum. The results were compared to those of a linear poly(ethylene glycol) (PEG) analogue with the same molecular weight. The adsorption kinetics as well as resulting surface coverages were monitored by ex situ spectroscopic ellipsometry (VASE), in situ optical waveguide lightmode spectroscopy (OWLS), and quartz crystal microbalance with dissipation (QCM-D) investigations. The expected compositions of the macromolecular films were verified by X-ray photoelectron spectroscopy (XPS). The results of the adsorption study, performed in a high ionic strength ("cloud-point") buffer at room temperature, demonstrate that the adsorption kinetics increase with increasing number of catechol binding moieties and exceed the values found for the linear PEG analogue. This is attributed to the comparatively smaller and more confined molecular volume of the dendritic macromolecules in solution, the improved presentation of the catechol anchor, and/or their much lower cloud-point in the chosen buffer (close to room temperature). Interestingly, in terms of mechanistic aspects of "nonfouling" surface properties, the dendron films were found to be much stiffer and considerably less hydrated in comparison to the linear PEG brush surface, closer in their physicochemical properties to oligo(ethylene glycol) alkanethiol self-assembled monolayers than to conventional brush surfaces. Despite these differences, both types of polymer architectures at saturation coverage proved to be highly resistant toward protein adsorption. Although associated with higher synthesis costs, dendritic macromolecules are considered to be an attractive alternative to linear polymers for surface (bio)functionalization in view of their spontaneous formation of ultrathin, confluent, and nonfouling monolayers at room temperature and their outstanding ability to present functional ligands (coupled to the termini of the dendritic structure) at high surface densities.

With the combination of molecular scale information from electron paramagnetic resonance (EPR) spectroscopy and meso-/macroscopic information from various other characterization techniques, the formation of mesoglobules of thermoresponsive dendronized polymers is explained. Apparent differences in the EPR spectra in dependence of the heating rate, the chemical nature of the dendritic substructure of the polymer, and the concentration are interpreted to be caused by the formation of a dense polymeric layer at the periphery of the mesoglobule. This skin barrier is formed in a narrow temperature range of ~4 K above T(C) and prohibits the release of molecules that are incorporated in the polymer aggregate. In large mesoglobules, formed at low heating rates and at high polymer concentrations, a considerable amount of water is entrapped that microphase-separates from the collapsed polymer chains at high temperatures. This results in the aggregates possessing an aqueous core and a corona consisting of collapsed polymer chains. A fast heating rate, a low polymer concentration, and hydrophobic subunits in the dendritic polymer side chains make the entrapment of water less favorable and lead to a higher degree of vitrification. This may bear consequences for the design and use of thermoresponsive polymeric systems in the fast growing field of drug delivery.

We report on the solid-state structural features of self-assembled chiral supramolecules based on ionic complexation of chiral cholesteric pendant groups with achiral dendritic macromolecules and show that their optical activity exhibits a systematic change in the ultraviolet/visible light (UV-vis) absorption and enhancement in the circular dichroism (CD) signal, indicating the occurrence of supramolecular chirality, also referred to as induced circular dichroism (ICD). We construct a homologous series of complexes by varying systematically from 1 to 3 the generation of dendritic units contained in dendrons, dendrimers, and dendronized polymers. The structural properties of the complexes are investigated by means of small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). Depending on the class of dendritic molecule and the generation, lamellar, columnar hexagonal, oblique columnar, and rectangular columnar phases can be found, with a direct correlation among the degrees of freedom of the dendritic macromolecules used and the level of order achieved in the self-assembled solid-state structures. The enhancement of the optical signals of these mesoscopic structures appears to be correlated with their order in the solid state. Complexes with the longest lattice correlation lengths also show the most enhanced CD signals. These results show the unique versatility of dendritic macromolecules as supramolecular templates capable of organizing low molecular weight chiral pendant units into a variety of solid-state structures with amplified optical properties.

The thickness of dendronized polymers can be tuned by varying their generation g and the dendron functionality X. Systematic studies of this effect require (i) synthetic ability to produce large samples of high quality polymers with systematic variation of g, X and of the backbone polymerization degree N, (ii) a theoretical model relating the solvent swollen polymer diameter, r, and persistence length, lambda, to g and X. This article presents an optimized synthetic method and a simple theoretical model. Our theory approach, based on the Boris-Rubinstein model of dendrimers predicts r approximately n(1/4)g(1/2) and lambda approximately n(2) where n = [(X - 1)(g) - 1]/(X - 2) is the number of monomers in a dendron. The average monomer concentration in the branched side chains of a dendronized polymer increases with g in qualitative contrast to bottle brushes whose side chains are linear. The stepwise, attach-to, synthesis of X = 3 dendronized polymers yielded gram amounts of g = 1-4 polymers with N approximately = 1000 and N approximately = 7000 as compared to earlier maxima of 0.1 g amounts and of N approximately = 1000. The method can be modified to dendrons of different X. The conversion fraction at each attach-to step, as quantified by converting unreacted groups with UV labels, was 99.3% to 99.8%. Atomic force microscopy on mixed polymer samples allows to distinguish between chains of different g and suggests an apparent height difference of 0.85 nm per generation as well as an increase of persistence length with g. We suggest synthetic directions to allow confrontation with theory.

The use of cationic dendronized polymers as a polyelectrolytic system for templating thermotropic liquid-crystalline phases (LC) via complexation and self-assembly with counter-charged ionic lipids is described. The topology of the LC phases resulting from the self-assembly process, their lattice parameter, and the interpenetration of lipid chains is discussed via birefringency analysis and small-angle X-ray scattering. Depending on the generation of the dendronized polymer and the length of the alkyl chains, amorphous, lamellar, and columnar tetragonal phases are observed. A structural model is proposed which accounts for the systematic variations of alkyl chain length as well as polymer generation. Owing to the reversible nature of the ionic complexation, this process proves high relevance for nanoporous channels, biomimetic, transport, and nanotemplating applications.

An efficient synthesis of a methacrylate-based, second-generation (G2) dendronized macromonomer and its free radical polymerization to the corresponding high-molar-mass G2 dendronized polymer are described. The molar mass is determined by gel permeation chromatography (GPC), light-scattering, and analytical ultracentrifugation and compared with values estimated from a scanning force microscopy (SFM) contour lengths analysis of individualized polymer strands on mica. The polymer carries terminal tert-butyl-protected carboxyl groups, the degree of deprotection of which with trifluoroacetic acid is quantified by NMR spectroscopy using the highest molar mass sample. SFM imaging of both protected (noncharged) and unprotected (charged) dendronized polymers on solid substrates reveals mostly linear chains but also some with main-chain branches. The nature of these branches is investigated and the degree roughly estimated to which they are formed. Finally, a synthetic model experiment is described which sheds some light on the aspect of whether chain transfer, a process that could lead to covalent branching, is of importance in the synthesis of the present dendronized polymers.

First through fourth generation (G1-G4) dendronized macromonomers, 3, 5, 7, and 9, with a methyleneoxycarbonyl spacer between the polymerizable group and dendritic side chain (dendron) were synthesized, and their polymerization behavior to the corresponding dendronized polymers PG1s, PG2s, PG3s, and PG4s, respectively, was investigated by heating the monomers to 55 degrees C without intentional addition of initiator. This self-induced polymerization is referred to as thermally induced radical polymerization (TRP). The molar masses of PG1s-PG4s were determined by gel permeation chromatography in DMF calibrated to a recently developed G1 dendronized polymer standard (PG1). A comparison of this homologous series' polymerization results with those of an already existing one, which differed only by the lack of this spacer (referred to as PG1-PG4), was made to contribute to the issue of whether short spacers have an effect on polymerization. Several representatives of both series were also used in the first systematic and generation-dependent investigation of these unusual comb polymers' bulk properties. Both structure and dynamics were investigated by DSC, X-ray diffraction, and dynamic mechanical measurements.

The synthesis of a variety of shape-persistent macrocycles with either one (1a-d, 2) or two (opposing) terpyridine units (3, 4, 5a-c) and inner diameters of up to 2 nm is described. The sequences are mainly based on transition metal cross-coupling reactions and, whenever appropriate, compared with one another regarding their respective efficiency. Typical overall yields and amounts prepared range from 8% (4) to 27% (3) and 25 mg (1a) to 290 mg (1b), respectively. For solubility and processing of the targeted cycles, all precursors have already been decorated with flexible side chains (hexyloxy or hexyloxymethyl). The cycles' characterization is based on MALDI-TOF mass spectrometry, 2D NMR spectroscopy, and/or low-temperature single-crystal X-ray diffraction. Their packing in the crystal is discussed in terms of both number and length of side chains. Cycle 1d was physisorbed into an ordered structure at the solution-HOPG interface and investigated by scanning tunneling microscopy (STM).

Positively charged dendronized polymers with protonated amine groups at the periphery and different dendron generations are cylindrically shaped nanoobjects whose radii and linear charge densities can be varied systematically. These polyelectrolytes have been complexed with DNA and subsequently adsorbed on precoated mica substrates. The analysis of scanning force microscopy data indicates that DNA wraps around the dendronized polymers. The calculated pitch is 2.30 +/- 0.27 and 2.16 +/- 0.27 nm for DNA wrapped around dendronized polymers of generation two and four, respectively. The complex with the second generation has been shown to be negatively charged, which is consistent with the theory of spontaneous overcharging of macro-ion complexes, when the electrostatic contribution to the free energy dominates over the elastic energy. The complexes may be of interest for the development of nonviral gene delivery systems.