Search

Chemistry research is presented describing the study of phosphodiestrase active site to prove the evidence of a hydroxide ion catalyst.

Phase regulation of noble metal-based nanomaterials provides a promising strategy for boosting the catalytic performance. However, realizing the continuous phase modulation in two-dimensional structures and unveiling the relevant structure-performance relationship remain significant challenges. In this work, we present the first example of continuous phase modulation in a library of Pd-Te hexagonal nanoplates (HNPs) from cubic-phase Pd 4 Te, rhombohedral-phase Pd 20 Te 7 , rhombohedral-phase Pd 8 Te 3 , and hexagonal-phase PdTe to hexagonal-phase PdTe 2 . Notably, the continuous phase regulation of the well-defined Pd-Te HNPs enables the successful modulation of the distance between adjacent Pd active sites, triggering an exciting way for tuning the relevant catalytic reactions intrinsically. The proof-of-concept oxygen reduction reaction (ORR) experiment shows a Pd-Pd distance-dependent ORR performance, where the hexagonal-phase PdTe HNPs present the best electrochemical performance in ORR (mass activity and specific activity of 1.02 A mg -1 Pd and 1.83 mA cm -2 Pd at 0.9 V vs RHE). Theoretical investigation reveals that the increased Pd-Pd distance relates to the weak *OH adsorption over Pd-Te HNPs, thus contributing to the remarkable ORR activity of PdTe HNPs. This work advances the phase-controlled synthesis of noble metal-based nanostructures, which gives huge impetus to the design of high-efficiency nanomaterials for diverse applications.

To promote the commercialization of direct formic acid fuel cell (DFAFC), it is vital to explore new types of direct formic acid oxidation (FAOR) catalysts with high activity and direct pathway. Here, we report the synthesis of intermetallic platinum-lead/platinum nanoplates inlaid with sub-monolayer antimony oxide surface (PtPb/Pt@sub-SbO x NPs) for efficient catalytic applications in FAOR. Impressively, they can achieve the remarkable FAOR specific and mass activities of 28.7 mA cm -2 and 7.2 A mg Pt , which are 151 and 60 times higher than those of the state-of-the-art commercial Pt/C, respectively. Furthermore, the X-ray photoelectron spectroscopy and X-ray absorption spectroscopy results collectively reveal the optimization of the local coordination environment by the surface sub-monolayer SbO -1 , which are 151 and 60 times higher than those of the state-of-the-art commercial Pt/C, respectively. Furthermore, the X-ray photoelectron spectroscopy and X-ray absorption spectroscopy results collectively reveal the optimization of the local coordination environment by the surface sub-monolayer SbO x , along with the electron transfer from Pb and Sb to Pt, driving the predominant dehydrogenation process. The sub-monolayer SbO x on the surface can effectively attenuate the CO generation, largely improving the FAOR performance of PtPb/Pt@sub-SbO x NPs. This work develops a class of high-performance Pt-based anodic catalyst for DFAFC via constructing the unique intermetallic core/sub-monolayer shell structure.

Designing platinum (Pt)-based formic acid oxidation reaction (FAOR) catalysts with high performance and high selectivity of direct dehydrogenation pathway for direct formic acid fuel cell (DFAFC) is desirable yet challenging. Herein, we report a new class of surface-uneven PtPbBi/PtBi core/shell nanoplates (PtPbBi/PtBi NPs) as the highly active and selective FAOR catalysts, even in the complicated membrane electrode assembly (MEA) medium. They can achieve unprecedented specific and mass activities of 25.1 mA cm -2 and 7.4 A mg Pt for FAOR, 156 and 62 times higher than those of commercial Pt/C, respectively, which is the highest for a FAOR catalyst by far. Simultaneously, they show highly weak adsorption of CO and high dehydrogenation pathway selectivity in the FAOR test. More importantly, the PtPbBi/PtBi NPs can reach the power density of 161.5 mW cm -1 for FAOR, 156 and 62 times higher than those of commercial Pt/C, respectively, which is the highest for a FAOR catalyst by far. Simultaneously, they show highly weak adsorption of CO and high dehydrogenation pathway selectivity in the FAOR test. More importantly, the PtPbBi/PtBi NPs can reach the power density of 161.5 mW cm -2 , along with a stable discharge performance (45.8% decay of power density at 0.4 V for 10 h), demonstrating great potential in a single DFAFC device. The in situ Fourier transform infrared spectroscopy (FTIR) and X-ray absorption spectroscopy (XAS) results collectively reveal a local electron interaction between PtPbBi and PtBi. In addition, the high-tolerance PtBi shell can effectively inhibit the production/adsorption of CO, resulting in the complete presence of the dehydrogenation pathway for FAOR. This work demonstrates an efficient Pt-based FAOR catalyst with 100% direct reaction selectivity, which is of great significance for driving the commercialization of DFAFC.

Designing efficient formic acid oxidation reaction (FAOR) catalysts with remarkable membrane electrode assembly (MEA) performance in a direct formic acid fuel cell (DFAFC) medium is significant yet challenging. Herein, we report that the monoclinic-phased platinum-tellurium nanotrepang ( m -PtTe NT) can be adopted as a highly active, selective, and stable FAOR catalyst with a desirable direct reaction pathway. The m -PtTe NT exhibits the high specific and mass activities of 6.78 mA cm -2 and 3.2 A mg Pt , respectively, which are 35.7/22.9, 2.8/2.6, and 3.9/2.9 times higher than those of commercial Pt/C, rhombohedral-phased Pt -1 , respectively, which are 35.7/22.9, 2.8/2.6, and 3.9/2.9 times higher than those of commercial Pt/C, rhombohedral-phased Pt 2 Te 3 NT ( r -Pt 2 Te 3 NT), and trigonal-phased PtTe 2 NT ( t -PtTe 2 NT), respectively. Simultaneously, the highest reaction tendency for the direct FAOR pathway and the best tolerance to poisonous CO intermediate can also be realized by m -PtTe NT. More importantly, even in a single-cell medium, the m ) and stability (53.2% voltage loss after 5660 s) than those of commercial Pt/C, demonstrating the great potential in operating DFAFC device. The -2 ) and stability (53.2% voltage loss after 5660 s) than those of commercial Pt/C, demonstrating the great potential in operating DFAFC device. The in-situ Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy jointly demonstrate that the unique nanostructure of m -PtTe NT can effectively optimize dehydrogenation steps and inhibit the CO intermediate adsorption, as well as promote the oxidation of noxious CO intermediate, thus achieving the great improvement of FAOR activity, poisoning tolerance, and stability. Density functional theory calculations further reveal that the direct pathway is the most favorable on m -PtTe NT than r -Pt 2 Te 3 NT and t -PtTe 2 NT. The higher activation energy to produce CO and the relatively weaker binding with CO of m -PtTe NT result in the better CO tolerance. This work achieves remarkable FAOR and MEA performances of advanced Pt-based anodic catalysts for DFAFCs via a phase engineering strategy.

Surface plasmon resonance (SPR) bridges photonics and photoelectrochemistry by providing an effective interaction between absorption and confinement of light to surface electrons of plasmonic metal nanostructures (PMNs). SPR enhances the Raman intensity enormously in surface-enhanced Raman spectroscopy (SERS) and leads to the plasmon-mediated chemical reaction on the surface of nanostructured metal electrodes. To observe variations in chemical reactivity and selectivity, we studied the SPR photoelectrochemical reactions of para -aminobenzoic acid (PABA) on nanostructured gold electrodes. The head-to-tail coupling product "4-[(4-imino-2,5-cyclohexadien-1-ylidene)amino]benzoic acid (ICBA)" and the head-to-head coupling product p , p '-azodibenzoate (ADBA) were obtained from PABA adsorbed on PMN-modified gold electrodes. In particular, under acidic and neutral conditions, ICBA was obtained as the main product, and ADBA was obtained as the minor product. At the same time, under basic conditions, ADBA was obtained as the major product, and ICBA was obtained as the minor product. We have also provided sufficient evidence for the oxidation of the tail-to-tail coupling reaction product that occurred in a nonaqueous medium rather than in an aqueous medium. The above finding was validated by the cyclic voltammetry, SERS, and theoretical calculation results of possible reaction intermediates, namely, 4-aminophenlylenediamine, 4-hydroxyphenlylenediamine, and benzidine. The theoretical adsorption model and experimental results indicated that PABA has been adsorbed as para -aminobenzoate on the gold cluster in a bidentate configuration. This work offers a new view toward the modulation of selective surface catalytic coupling reactions on PMN, which benefits the hot carrier transfer efficiency at photoelectrochemical interfaces.

An attractive field of plasmon-mediated chemical reactions (PMCRs) is developing rapidly, but there is still incomplete understanding of how to control the kinetics of such a reaction related to hot carriers. Here, we chose 8-bromoadenine (8BrAd) as a probe molecule of hot electrons to investigate the influence of the electrode potential, laser wavelength, and power on the PMCR kinetics on silver nanoparticle-modified silver electrodes. Plasmonic hot electron-mediated cleavage of the C-Br bond in 8BrAd has been investigated by combining in situ electrochemical surface-enhanced Raman spectroscopy and density functional theory calculations. The experimental and theoretical results reveal that the energy position of plasmon relaxation-generated hot electrons can be modulated conveniently by applied potentials and laser light. This allows the proposal of a mechanism of modulating the matching energy of the hot electron of plasmon relaxation to promote the efficiency of PMCRs in electrochemical interfaces. Our work will be helpful to design surface plasmon resonance photoelectrochemical reactions on metal electrode surfaces of nanostructures with higher efficiency.

Direct epoxidation of propylene by molecular oxygen alone is one of the "dream reactions" in heterogeneous catalysis. Despite much effort, the yield of propylene epoxide is still too low to be commercially attractive due to the trade-off between conversion and selectivity. Here, we demonstrate that doping Cl into the lattice of Cu 2 O nanocrystals by the intergrowth method not only can enhance the catalytic selectivity and conversion of direct propylene epoxidation but also can solve the long-existing Cl loss problem. In particular, Cl-doped rhombic dodecahedral Cu 2 O with (110) exposing facets exhibited 63% PO selectivity with a 12.0 h -1 turnover frequency at 200 °C, outperforming any other coinage metal-based catalysts under mild conditions. Comprehensive characterization and theoretical calculations revealed that the Cl-decorated Cu(I) facilitated formation of electrophilic oxygen species, thus boosting the production of propylene oxide. This work provides a general strategy to develop catalysts and explore the promoter effect by creating uniform isolated anion doping to activate a nearby metal center by virtue of well-defined nanocrystals.

Plasmonic sensors are promising for ultrasensitive chemical and biological analysis. However, there are increasing experimental findings that cannot be well addressed by theoretical calculations, including the nonlinear dependence of the plasmonic peak wavelength on the refractive index (RI) and the ultrahigh sensitivity beyond the theoretical limit. The gap between experiments and theoretical calculations is that the bulk RI (BRI) used for calculation could be different from the interfacial RI (IRI) determining the electromagnetic response as a result of the interaction of molecules with the surface. But there is still no method to determine the IRI. Herein, we quantitatively determine the IRI by disentangling the surface RI (SRI) from the BRI. The obtained IRI can be directly applied in theoretical calculations to reliably reflect the experimental response and rigorously guide the design of plasmonic sensors. Moreover, it can be a fundamental dimensionless number to describe the light-matter interaction at the interface.

The rational design and applications of plasmon-mediated chemical reactions (PMCRs) are fundamentally determined by an understanding of photon-electron-molecule interactions. However, the current understanding of the PMCR of plasmon-decayed hot electron-mediated reactions remains implicit, since there has not been a single measurement of both hot-electron transfer and molecular transformation following photon excitation. Therefore, we invented a method called microphotoelectrochemical surface-enhanced Raman spectroscopy (μPEC-SERS) that uses an ultramicroelectrode (UME) whose dimensions match those of the focused laser spot. This system can simultaneously record the photocurrent (∼picoamps) of hot-electron transfer with a high signal-to-noise ratio and the SERS spectra of a molecular reaction in the same electrode area. The responses of the photocurrent and SERS spectra to laser illumination can correlate the surface reaction activated by hot electrons with the SERS spectral changes. A typical PMCR of  p -aminothiophenol (PATP) on a Ag UME was used to illustrate that the correlation of the photocurrent with the spectral changes is capable of revealing the reaction mechanism in terms of the formation of activated oxygenated species. The laser power-, laser wavelength-, and surface roughness-dependent photocurrents link the formation of activated oxygenated species to the hot-electron transfer. Further comparisons of the photocurrent with the conventional electrochemical current of the oxygen reduction reaction indicate that the activated oxygenated species are oxidative in transforming PATP to p , p '-dimercaptoazobenzene, which is supported by a density functional theory (DFT) calculation. Therefore, μPEC-SERS could be a powerful tool for investigating PMCRs and other systems involving photon-electron-molecule interactions.

Surface plasmons (SPs) are able to promote chemical reactions through the participation of the energetic charge carriers produced following plasmons decay. Using p-aminothiophenol (PATP) as a probe molecule, we used surface-enhanced Raman spectroscopy to follow the progress of its transformation, in situ, to investigate systematically the role of hot electrons and holes. The energetic carrier mediated PATP oxidation was found to occur even in the absence of oxygen, and was greatly influenced by the interface region near the gold surface. The observed reaction, which occurred efficiently on Au@TiO 2 nanostructures, did not happen on bare gold nanoparticles (NPs) or core-shell nanostructures when a silicon oxide layer blocked access to the gold. Moreover, the product of the PATP oxidation with oxygen on Au@TiO 2 nanostructures differed from what was obtained without oxygen, suggesting that the mechanism through which "hot holes" mediated the oxidation reaction was different from that operating with oxygen activated by hot electrons.

Perovskite solar cells are strong competitors for silicon-based ones, but suffer from poor long-term stability, for which the intrinsic stability of perovskite materials is of primary concern. Herein, we prepared a series of well-defined cesium-containing mixed cation and mixed halide perovskite single-crystal alloys, which enabled systematic investigations on their structural stabilities against light, heat, water, and oxygen. Two potential phase separation processes are evidenced for the alloys as the cesium content increases to 10% and/or bromide to 15%. Eventually, a highly stable new composition, (FAPbI 3 ) 0.9 (MAPbBr 3 ) 0.05 (CsPbBr 3 ) 0.05 , emerges with a carrier lifetime of 16 μs. It remains stable during at least 10 000 h water-oxygen and 1000 h light stability tests, which is very promising for long-term stable devices with high efficiency. The mechanism for the enhanced stability is elucidated through detailed single-crystal structure analysis. Our work provides a single-crystal-based paradigm for stability investigation, leading to the discovery of stable new perovskite materials.

A pyrene-cored molecular quadripod 1,3,6,8-tetra(di( p-pyrid-4-ylphenyl)amino)pyrene (TAPyr) is presented as a noncovalent interfacial coupling reagent for the immobilization of coordination assemblies. This bench-stable molecule is readily available and has a quadripod shape with four pyridine legs and four pyridine handles on the top exterior. By a simple and short dipping procedure under ambient conditions, TAPyr is firmly immobilized on electrode surfaces in an upright fashion as probed by electrochemical, absorption spectral, atomic force microscopy, and scanning tunneling microscopy analysis. Using Pd(PhCN) 2 Cl 2 as a metallolinker, 4-ferrocenylpyridine, a pyridine-terminated monoruthenium complex 1, and a diruthenium complex 2 with two pyridine ends have been grafted onto the ITO/TAPyr surface. The obtained thin films exhibit good electrochemical stability that is comparable or superior to those prepared by the state-of-the-art Si-O-Sn covalent functionalization. Appealing electrochromism is demonstrated with the thin films of ruthenium complexes on ITO.

The synthesis of "rim-differentiated" C 5 -symmetric pillar[5]arenes, whose two rims are decorated with different chemical functionalities, has remained a challenging task. This is due to the inherent statistical nature of the cyclization of 1,4-disubstituted alkoxybenzenes with different substituents, which leads to four constitutional isomers with only 1/16th being rim-differentiated. Herein, we report a "preoriented" synthetic protocol based on FeCl 3 -catalyzed cyclization of asymmetrically substituted 2,5-dialkoxybenzyl alcohols. This yields an unprecedented 55% selectivity of the C 5 -symmetric tiara-like pillar[5]arene isomer among four constitutional isomers. Based on this new method, a series of functionalizable tiara-pillar[5]arene derivatives with C 5 -symmetry was successfully synthesized, isolated, and fully characterized in the solid state.

Photocatalysis is a promising technology for renewable energy production. Many photocatalysis have realized the visible-light-driven catalytic activity. However, it is still difficult to achieve the enhanced photocatalytic activity with tunable wavelength. We have designed tunable wavelength enhanced photoelectrochemical cells by tuning the surface plasmon resonance (SPR) peaks, which can be controlled by the aspect ratios of the Au nanorods, for both the cathode with the hydrogen evolution reaction and the anode with the electrooxidation of methanol reaction. The optimal photocatalytic activity of the hydrogen evolution and electrooxidation of the methanol can be realized only when the illuminating wavelength matches with the SPR peaks, which is quite selective to the illuminating wavelength. The blue shift of the SPR peak increases the photoelectrocatalytic effect whereas the red shift enhances the photothermal effect. Such studies provide a useful way for improving the photocatalytic activity and the selectivity of the photocatalytic reactions by adjusting the illuminating wavelength.

Polyketals, which can be biodegradable, have good biocompatibility, and are pH-sensitive, could have broad applicability in drug delivery and other biomedical applications. However, facile synthesis of high molecular weight polyketals is challenging, and short durations of drug release from polyketal particulate formulations limit their application in drug delivery. Here we report the synthesis of a di-isopropenyl ether monomer and its use to synthesize high molecular weight estradiol-polyketal conjugates by addition polymerization. Microparticles were prepared from the estradiol-polyketal conjugate, where estradiol was incorporated into the polymer backbone. The particles had high drug loading and significantly prolonged drug release. Release of estradiol from the drug-polyketal conjugate microparticles was acid-responsive, as evidenced by faster drug release at low pH and with co-incorporation of PLGA. Tissue reaction to the microparticles was benign in vivo. Polyketal drug conjugates are promising candidates for long-acting drug delivery systems to treat chronic diseases.

The E3 ubiquitin ligase MDM2 functions as a crucial negative regulator of the p53 tumor suppressor protein by antagonizing p53 transactivation activity and targeting p53 for degradation. Cellular stress activates p53 by alleviating MDM2-mediated functional inhibition, even though the molecular mechanisms of stress-induced p53 activation still remain poorly understood. Two opposing models have been proposed to describe the functional and structural role in p53 activation of Ser17 phosphorylation in the N-terminal "lid" (residues 1-24) of MDM2. Using the native chemical ligation technique, we synthesized the p53-binding domain (1-109)MDM2 and its Ser17-phosphorylated analogue (1-109)MDM2 pS17 as well as (1-109)MDM2 S17D and (25-109)MDM2, and comparatively characterized their interactions with a panel of p53-derived peptide ligands using surface plasmon resonance, fluorescence polarization, and NMR and CD spectroscopic techniques. We found that the lid is partially structured in apo-MDM2 and occludes p53 peptide binding in a ligand size-dependent manner. Binding of (1-109)MDM2 by the (15-29)p53 peptide fully displaces the lid and renders it completely disordered in the peptide-protein complex. Importantly, neither Ser17 phosphorylation nor the phospho-mimetic mutation S17D has any functional impact on p53 peptide binding to MDM2. Although Ser17 phosphorylation or its mutation to Asp contributes marginally to the stability of the lid conformation in apo-MDM2, neither modification stabilizes apo-MDM2 globally or the displaced lid locally. Our findings demonstrate that Ser17 phosphorylation is functionally neutral with respect to p53 binding, suggesting that MDM2 phosphorylation at a single site is unlikely to play a dominant role in stress-induced p53 activation., (© 2012 American Chemical Society)

We report that two molecular building blocks differ only by two protons, yet they form totally different nanostructures. The protonated one self-organized into hollow nanospheres (~200 nm), whereas the one without the protons self-assembled into rectangular plates. Consequently, the geometrically defined nanoassemblies exhibit radically different properties. As self-assembly directing units, protons impart ion-pairing and hydrogen-bonding probabilities. The plate-forming nanosystem fluoresces weakly, probably due to energy transfer among chromophores (Φ < 0.2), but the nanospheres emit strong yellow fluorescence (Φ ≈ 0.58-0.85).

A single probe has limited brightness in time-domain imaging and such limitation frequently renders individual molecules undetectable in the presence of interference or complex cellular structures. However, a single photoswitchable probe produces a signal, which can be separated from interference or noise using photoswitching-enabled Fourier transformation (PFT). As a result, the light-modulated probes can be made super bright in the frequency domain simply by acquiring more cycles in the time domain.

Folding of oligopyridine-dicarboxamides into helices inhibits the N-oxidation of pyridine rings central in the sequence and also much enhances the N-oxidation of pyridine rings peripheral in the sequence. Oligomers N-oxidized at their terminal position show an increased ability to hybridize into double helices.

The kinetic data published on phosphotriesterase (PTE), with various complexed metals, clearly indicates that the P=O and P=S bonds of phosphotriester and thiophosphotriester substrates, respectively, are strongly polarized by one or both of the active site complexed metal ions. However, this observation is not consistent with the three-dimensional X-ray crystal structure of zinc-substituted PTE with active site bound substrate analogue diethyl 4-methylbenzylphosphonate. In this structure, the distance between the phosphoryl oxygen and the nearest zinc is 3.4 A, a distance too large to afford strong polarization. In the present paper, the geometry and mobility of various PTE active site-substrate complexes are examined by performing both molecular dynamics (MD) simulations and quantum mechanical calculations. Two known substrates are considered, paraoxon and sarin, although their turnover rates vary about 100-fold. The results indicate that PTE forms a complex with either substrate in which the phosphoryl oxygen becomes strongly coordinated with the less buried zinc atom. It is shown that the geometry of the active site is changed when the protein is immersed in a water bath and relaxed by MD. The most substantial conformational change is the opening of the gateway in a pocket where the location of the leaving group is expected. The opening is observed for the pure enzyme as well as for the enzyme/substrate complexes and it ranges from 11 to 18 A. It is also shown that the pockets, in which the substrate substituents are localized, exhibit different flexibility and interact with the substrate with coordinated conformational adjustments.