Search

This paper describes a method of estimating the number of marriages during an inter-censal period among a group of never-married persons. Two alternative procedures are suggested: the first based on data on the never-married category and the second based on data on the ever-married category. The essential data needed are marital distributions by quinquennial age-groups from two successive censuses. The marital data from the 1951 and 1961 censuses of India are used to discuss the methodological problems involved in the estimation of marriage frequencies and in the construction of nuptiality tables based on them. Marriage and death are taken as the two attrition factors for decrement of single population. Gross and Net Attrition Tables for the single population of India are constructed for each sex. Section 5 describes various nuptiality measures derived from the Attrition Tables. It is suggested that the approach developed in this paper can be utilized for reliable marital and, subsequently, fertility projections. [ABSTRACT FROM AUTHOR]

In a recent paper in this Journal, Rothenberg, Fisher and Tilanus [1] discuss a class of estimators of tile location parameter of the Cauchy distribution, taking the form of the arithmetic average of a central subset, of the sample order statistics. They show that the average of roughly the middle quarter of the ordered sample has minimum asymptotic variance within this class, and that asymptotically it eliminates about. 36 per cent of the efficiency loss of the median (the most commonly used estimate,r) in comparison to the maximum likelihood estimator (m.l.e.). Of course both the m.l.e, and the best linear unbiased estimator based on the order statistics (BLUE) achieve full asymptotic efficiency in the Cramer-Rao sense and there can be no dispute about the relative merits of the three estimators asymptotically, or about the inferiority of the median (with asymptotic efficiency 8/pi[sup 2] * This character cannot be converted in ASCII text) 0.8 compared with about 0.88 for the estimator of Rothenberg et al.). In any practical situation however, we will be concerned with estimation from samples of finite size and asymptotic properties will not necessarily give any guidance here. We are essentially concerned with two points in assessing the relative merits of estimators in small samples, their case of application and "small-sample efficiency" which is conveniently measured as the ratio of the Cramer-Rao lower bound to the variance of the estimator. In this paper various estimators of the location of the Cauchy distribution arc compared in these two respects for samples of up to 20 observations. The small-sample properties of the m.l.e. have been extensively discussed elsewhere (Barnett [2]) and relevant results are summarized where necessary. The main purpose of the paper is to discuss general linear estimators based on the order statistics, and to assess their utility in the present context. Since this paper was prepared a further interesting 'quick estimator', b [ABSTRACT FROM AUTHOR]

Given N points independently drawn from the uniform distribution on (0, 1), let p[sub n], be the size of the smallest interval that contains n out of the N points; let n[sub p], be the largest number of points to be found in any subinterval of (0, 1) of length p. This paper uses a result of Karlin, McGregor, Barton and Mallows to determine the distribution of n[sub p] for p = 1/k, k an integer. The paper gives simple determinations for the expectations and variances of p[sub n], for all fixed n > (N + 1)/2, and of n[sub 1/2]. The distribution and expectation of n[sub p] are estimated and tabulated for the cases p = 0.1(0.1)0.9, N =2(1)10. [ABSTRACT FROM AUTHOR]

Recently Professors T. J. Rothenberg, F. M. Fisher, and C. B. Tilanus published a paper proposing the class of trimmed means as estimators of the location parameter of the Cauchy distribution [5]. They showed that the asymptotic sampling variance of the estimators in this class is essentially minimized by using the middle 24% of the sample order statistics. The corresponding estimate has an asymptotic relative efficiency to the best estimator for complete samples (A.R.E.) of .87796 as compared to an A.R.E. of .81057 for the sample median. In this paper a few "quick estimators" are considered as estimators for the location parameter of the Cauchy Distribution. A "quick estimate" is a linear combination (a weighted average) of one or more order statistics. Our goal is to find a simple estimator, i.e. an estimator based on only a few order statistics, which has an A.R.E. of at least 90%. We found an estimator based on five order statistics which is considerably better than the optimum trimmed mean (using the middle 24% of the sample order statistics) and much better than the sample median. The A.R.E. of the optimum censored estimate with censored fractiles .38 and .62 is also found, and a comparison between the trimmed, censored, and proposed estimators is made. [ABSTRACT FROM AUTHOR]

Given a population of N units, it is required to draw a sample of n distinct units in such a way that the probability for the ith unit to be in the sample is proportional to its 'size' x. From the alternative methods of achieving this we consider here only the so-called systematic method which, to the best of our knowledge, was first developed by W. G. Madow (1949): The units in the population are listed in a 'particular' order, their x, accumulated and a systematic selection of n elements from a 'random start' is then made on the accumulation. In a more recent paper (H. O. Hartley and J. N. K. Rao (1962) ) an asymptotic estimation theory (for large N) associated with this procedure was developed for the case when the order of the listed units is random. In this paper we draw attention to certain properties of Madow's estimator: We utilize the fact that with systematic sampling the total number of different samples is N (rather than ([This eq. cannot be change in char.]) as with completely random sampling). This simplification in the definition of the variance of the estimator in repeated sampling enables us to identify the exact variance of Madow's estimator with a 'between sample mean square' in a special analysis of variance (see section 4) and compare it with the variance of the pps estimator in sampling with replacement as well as in other sampling procedures. We also develop two approximate methods of variance estimation (see section 5). We pay particular attention to the case when the units are listed in the order of their size. With this particular arrangement our method can be described as 'systematic with random start' and the gain in precision that we accomplish has of course, analogues in systematic sampling with equal probabilities employing ratio estimators in which there is a relation between the ratio ri =yi/Xi and xi Compared with other methods the present procedure combines the advantage of ease of systematic sample selection with the availability of exact variance formulas for any n and N. Moreover, it usually leads to a more efficient estimate. Its shortcoming resides in the fact that the estimation of the variance is based on certain assumptions. [ABSTRACT FROM AUTHOR]

In this article, the author will talk about researcher R.A. Fisher's contributions to statistics. It is well-known that his work in genetics was of comparable status. It is largely represented by his book "The Genetical Theory of Natural Selection," though in his subsequent work his further association with ecological and experimental studies in evolutionary genetics, and his share in the development of studies in the human blood groups, might especially be recalled. Fisher's contributions to statistics began with a paper in 1912 advocating the method of maximum likelihood for fitting frequency curves, although the first paper of substance was his 1915 paper in the journal "Biometrika," on the sampling distribution of the correlation coefficient. Fisher tried to pose problems of analysis as the reduction and simplification of statistical data. He put forward his well-known concept of amount of information in estimation theory, such that information might be lost, but never gained, by analysis. His concept has been of great practical value, especially in large sample theory.

This paper treats essentially the first derivative of an estimator viewed as functional and the ways in which it can be used to study local robustness properties. A theory of robust estimation "near" strict parametric models is briefly sketched and applied to some classical situations. Relations between yon Mises functionals, the jackknife and U-statistics are indicated, A number of classical and new estimators are discussed, including trimmed and Winsorized means, Huber-estimators, and more generally maximum likelihood and M-estimators, Finally, a table with some numerical robustness properties is given. [ABSTRACT FROM AUTHOR]

A large class of useful multivariate recursive time series models and estimation methods has appeared in the engineering literature. Despite the interest and utility which this recursive work has when viewed as an extension of regression analysis, little of it has reached statisticians working in regression. To overcome this we (a) present the relevant random-beta regression theory as a natural extension of conventional fixed-beta regression theory and (b) derive the optimal recursive estimators in terms of the extended regression theory for a typical form of the recursive model. This also opens the way for further developments in recursive estimation, which are more tractable in the regression approach and will be presented in future papers. [ABSTRACT FROM AUTHOR]

The problem considered in this paper is how to combine estimators of the common mean from two samples corresponding to normal populations with different unknown variances. Attention is confined to the case where it is known that the variance of one specific population exceeds that of the other. Three classes of unbiased estimators are presented, one of which is based on a preliminary test of significance regarding the ratio of the population variances. The gain achieved by utilizing the knowledge that the ratio of variances exceeds one is investigated by comparing the efficiencies of these estimators with an estimator presented by Graybill and Deal [1] in which no restriction on the ratio of variances is present. [ABSTRACT FROM AUTHOR]

The least squares estimator of a regression coefficient beta is vulnerable to gross errors and the associated confidence interval is, in addition, sensitive to non-normality of the parent distribution. In this paper, a simple and robust (point as well as interval) estimator of beta based on Kendall's [6] rank correlation tau is studied. The point estimator is the median of the set of slopes (Y[sub I]--Y[sub I])/(t[sub I]--t[sub I]) joining pairs of points with t[sub 1] is not equal to t[sub 1], and is unbiased. The confidence interval is also determined by two order statistics of this set of slopes. Various properties of these estimators are studied and compared with those of the least squares and some other nonparametric estimators. [ABSTRACT FROM AUTHOR]

This paper presents three upper bounds for the variance of an estimator, based on observations selected with varying probabilities from a finite population, the elements of which are ranked with respect to the Y values. Accordingly, the usefulness of these bounds relates to the pre-enumeration analysis where one may well know the intended probabilities and joint probabilities corresponding to the sampling scheme but does not know the Y values. If, however, one can make a conservative guess at the largest Y value, one can use these bounds. Some examples are included to illustrate the theory. [ABSTRACT FROM AUTHOR]

In this paper, successive sampling procedures using multi-stage sampling design have been developed. It is found that it is generally advantageous to retain a fraction of the sample selected on previous occasions for improving the estimate of a mean on the most recent occasion. This type of partial replacement may sometimes be recommended for estimating a mean over all occasions. This is specially true if the experimenter is interested in not only obtaining an overall estimate for the entire period but also in separate estimates for each occasion. In a sampling enquiry repeated on three occasions it has been observed that for estimating the mean on the third occasion it would be preferable to repeat the same sample fraction from one occasion to the next, while for estimating the mean over all occasions the sample fraction repeated on the second occasion should not be repeated on the third but in its place a sub-sample from the sample selected afresh on the second occasion should be retained. [ABSTRACT FROM AUTHOR]

While distribution-free procedures are often appropriate when testing statistical hypotheses, they may become complicated or involve loss of power when the data are grouped. For rank tests the ties caused by grouping are generally broken either by using a randomization procedure or averaging the tied ranks. In this paper the power loss due to equi-spaced grouping (in terms of Pitman asymptotic relative efficiency) is investigated for some commonly used tests, for each method of tie-breaking. The tests considered are Wilcoxon's and Mood's tests for the two-sample problem, Mann's test for randomness, and Pitman's independence test. It is shown how the power loss depends on the width of the grouping intervals and the distribution of the data, and some numerical studies are given. The results seem to indicate that the power loss is small even for a sizable group interval, and that it may be preferable to break ties by randomization than by averaging ranks. [ABSTRACT FROM AUTHOR]

This paper investigates the properties of the minimum variance unbiased (M.V.U) and maximum likelihood (M.L.) estimators of the reliability functions of systems composed of two subsystems connected in series. The study falls into two parts, one for the Poisson case and one for the exponential case. In each of these cases the situations are distinguished between, where the two subsystems are identical and situations subsystems are different. In the Poisson case under minimum variance unbiased estimators a system A is considered which is composed of two subsystems connected in series. Failure time points of the subsystem follow a Poisson process with intensity. An experiment is performed on n independent replicates of each of the considered subsystems over a period of length. Under the exponential case, a system A is considered, same as Poisson case which consists of two subsystems connected in series. Failure time points of the two subsystems follow a Poisson process. Independent observations are available on the interfailure time lengths; namely, the life-lengths of the subsystems.

In this paper we review the literature on the problem of handling multivariate data with observations missing on some or all of the variables under study. We examine the ways that statisticians have devised to estimate means, variances, correlations and linear regression functions from such data and refer to specific computer programs for carrying out the estimation. We show how the estimation problems can be simplified if the missing data follows certain patterns. Finally, we outline the statistical properties of the various estimators. [ABSTRACT FROM AUTHOR]

Usually auxiliary information based on just one variate is used to improve the precision of estimators of population totals, means, etc. In this paper a method is proposed of using information on several variates to achieve higher precision. The technique of difference estimation is employed throughout. It is shown that the variances of difference estimators are comparable to those of ratio estimators. The results are extended to double sampling procedures and sampling over two occasions. [ABSTRACT FROM AUTHOR]

Regression upon principal components of the percentage points of the income and education distributions for 1950 census tracts in the city of Chicago led to the estimation of "beta coefficient profiles" for television receiver and refrigerator ownership, for central heating system usage, and for a measure of dwelling unit overcrowding. The betas are standardized coefficients of regression of a dependent variable upon the proportions of families in the classes of the marginal income and education distributions. They measure the relative contribution of families in these classes to the over-all per cent saturation of the dependent variable in the tract. The coefficients were estimated by techniques developed in the first portion of the paper; estimation by classical regression methods would have been impossible because of multicollinearity. The empirical results are in substantial agreement with findings from regressions of the dependent variables upon the mean values of income and education, and their squares. The statistical devices appear to be useful in exploratory empirical research. [ABSTRACT FROM AUTHOR]

The need for data compression, a consequence of the demands made on the telemetry system of a space vehicle, prompts consideration of the use of sample quantiles in estimating population parameters and obtaining tests of goodness of fit for large samples. In this paper optimal unbiased estimators of the mean and standard deviation are given using up to twenty quantiles when the parent population is normal. Moreover, the estimators are relatively insensitive to deviations from normality. A distribution-free goodness-of-fit test is presented based on the sum of the squares of four quantiles after an orthogonal transformation to independent normal deviates. If a frequency function is of the form f(x; p) = pf[sub 1](x) + (1 - p) f[sub 2](x), 0 < p < 1, where f, and f[sub 2] are normal frequency functions, the distribution is likely to be bimodal. Another goodness-of-fit test is obtained using four quantiles, which is likely to have considerable power with a null hypothesis of normality and the alternative hypothesis of bimodality. The "data compression ratios" obtained with the use of a quantile system can be on the order of 100 to 1. [ABSTRACT FROM AUTHOR]

A class of estimators (referred to as the Fourier estimators fm and Fm of the probability density function f and the associated cumulative distribution function F are considered. Here fm = Σ m k=0 â2 ψ k and ...m = Σ m k=0 Âk} comprise an orthogonal set with respect to weight function w(x), and the statistics âk where the functions {ψ k} comprise an orthogonal set with respect to weight function w(x), and the statistics âk and Âk are formed from the n unordered observations. Simple expressions are found for the mean integrated square errors, M.I.S.E., of the estimators ...m and ...m, i.e., E ∫ {f(x) - fm](x)}²]w(x)dx and E ∫ of {F(x) - Fm(x)}2 w(x)dx in terms of the variances of âk are the sample trigonometric moments. The variances and covariances of the statistics â k and the Fourier coefficients of f and F. For Fourier estimators based upon the trigonometric orthogonal functions the âk are the sample trigonometric moments. The variances and covariances of the statistics â k and Âk for these special cases are shown to be linear functions of the density f's Fourier coefficients. Therefore, simple expressions are obtained which relate the M.I.S.E. of the Fourier estimators fm and Fm to the Fourier coefficients of the density f. These M.I.S.E. expressions both facilitate the evaluation of error for specific densities and specific truncation points m and make it possible for an optimal value of m to be estimated from the sample. The simplicity of the M.I.S.E. expressions in the trigonometric case does not seem to be paralleled by simple expressions for Var âk, and hence M.I.S.E., for other orthogonal systems, notably those based upon Hermite polynomials. A procedure for choosing the optimal number of terms of fm and Fm is derived and the M.I.S.E. of fm is compared to that of several alternative estimators of the population density. It is shown that for almost all cumulatives there exists a finite m such that Fm has smaller M.I.S.E. than the sample cumulative, i.e., the step function. [ABSTRACT FROM AUTHOR]