1. Fabrication of Er:Y2O3 transparent ceramics for 2.7 μm mid-infrared solid-state lasers.
- Author
-
Yin, Danlei, Wang, Jun, Wang, Ying, Liu, Peng, Ma, Jie, Xu, Xiaodong, Shen, Deyuan, Dong, Zhili, Kong, Ling Bing, and Tang, Dingyuan
- Subjects
- *
YTTRIUM oxides , *SOLID-state lasers , *TRANSPARENT ceramics , *HOT pressing , *TEMPERATURE effect - Abstract
Laser grade 7 at.% Er:Y 2 O 3 transparent ceramics with submicron grain size were fabricated by using one-step vacuum sintering followed by hot isostatic pressing (HIPing) technique. Through studying the sintering trajectory of Er:Y 2 O 3 ceramics, the sintering temperature zone where sufficient relative density (>96%), no pore-boundary separation, and sub-micron grain size (<1 μm) ceramic samples could be identified. The samples pre-sintered in this zone were readily densified by HIPing. To maximum the densification and achieve high transparency, it is critical to suppress the final-stage grain growth. After HIPing at 1520 °C, the Er:Y 2 O 3 ceramics were fully densified without further grain growth, and exhibited in-line transmission of about 81.6% at 2000 nm. Continuous wave (CW) room temperature laser operation of the Er:Y 2 O 3 transparent ceramic at 2.7 μm was demonstrated. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF