Search

Background: Cellulose nanofiber (CNF) is an ideal Pickering emulsion stabilizer because of its high aspect ratio and flexibility. CNF was hydrophobically modified by dodecenyl succinic anhydride and used to stabilize the simulated food emulsion system containing insect protein. The prepared dodecenyl succinate nanofiber (D-CNFs) was characterized by contact angle and laser particle size analyzer. The stability of the emulsion system under different conditions was characterized by zeta potential and appearance observation. Lastly, in vitro digestion simulation experiments were carried out to investigate whether the addition of D-CNFs had an effect on the digestion and absorption of oil., Results: The modification process for dodecenyl succinic anhydride to CNFs was that the system temperature was 40 °C, the system pH value was 8.5 and the reaction time was 6 h. The water contact angle of the modified CNFs increased to 83.2 ± 0.9°. D-CNFs were introduced into the simulated food emulsion system containing insect protein. The increase in the concentration of D-CNFs in the aqueous phase promoted the stability of the simulated emulsion system. Increasing the ratio of insect protein was not conducive to the stability of the emulsion. The final fat digestibility of the emulsion with D-CNFs was lower than that of the emulsion without D-CNFs., Conclusion: Overall, the analysis and characterization results show the potential of the modified CNF as a food simulant emulsion stabilizer containing insect protein, which can be used for the development of specific functional foods. © 2024 Society of Chemical Industry., (© 2024 Society of Chemical Industry.)

Background: Cherry tomatoes are nutritious and favored by consumers. Processing them into dried cherry tomatoes can prolong their storage life and improve their flavor. The pretreatment of tomato pericarp is crucial for the subsequent processing. However, the traditional physical and chemical treatments of tomato pericarp generally cause nutrient loss and environmental pollution., Results: In this study, a novel enzymatic method for cherry tomatoes was performed using mixed enzymes containing cutinase, cellulase and pectinase. Results showed that the pericarp permeability of cherry tomatoes was effectively improved due to enzymatic treatment. Changes in the microscopic structure and composition of the cuticle were revealed. After treatment with different concentrations of enzymes, cherry tomatoes exhibited higher pericarp permeability and sensory quality to varying degrees. The lycopene content and total polyphenol content significantly increased 2.4- and 1.45-fold, respectively. In addition, the satisfactory effect of the six-time reuse of enzymes on cherry tomatoes could still reach the same level as the initial effect, which effectively reduced the cost of production., Conclusions: This study revealed for the first time that a mixed enzymatic treatment consisting of cutinase, pectinase and cellulase could effectively degrade the cuticle, enhance the pericarp permeability and improve the quality of cherry tomatoes, with the advantages of being mildly controllable and environmentally friendly, providing a new strategy for the processing of dried cherry tomatoes. © 2023 Society of Chemical Industry., (© 2023 Society of Chemical Industry.)

Background: The usage of natural polysaccharides is attractive to researchers around the world. At the same time, non-/low-toxic crosslinkers prepared by polysaccharides are expected to fabricate protein-based films in many fields. Herein, different dialdehyde polysaccharides (DPs) were successfully synthesized and applied to prepare gliadin-films under alkaline conditions. The functional properties and formation mechanisms of the films were fully investigated., Results: The results showed that the mechanical properties, water-resistant properties, thermal stability, and antibacterial properties of the gliadin-films were improved by DPs and alkali treatment. Particularly dialdehyde dextrin (DAD) crosslinked gliadin-films showed the highest tensile strength, but no additional effect on their elongation, or advancement on the other functional properties. The film-forming mechanisms indicated that Schiff base bonds, hydrophobic interactions, electrostatic interactions, and hydrogen bonds were the main forces in the films, supporting their improvement in functional properties., Conclusion: DPs, especially DAD, can be a promising crosslinker in fabricating gliadin-films. These findings have shown great promise to seek an effective crosslinker for fabricating gliadin/protein-based packaging. © 2023 Society of Chemical Industry., (© 2023 Society of Chemical Industry.)

Background: Most of the current materials used in food packaging are synthetic and non-degradable, raising environmental issues derived from the accumulation of plastics in landfills/waterways. The food industry increasingly needs eco-friendly sustainable materials that meet food-packaging requirements. Bacterial nanocellulose (BNC), a biopolymer obtained by fermentation, offers very good mechanical properties and the ability to carry and deliver active substances. However, its water-vapor permeability is too high for food-packaging applications. In this work, a layered biodegradable composite based on BNC and polyhydroxyalkanoate (PHBV) was produced, attempting to improve its overall barrier properties. Polyhydroxyalkanoate is a biopolymer with high degree of hydrophobicity and biodegradability, and is also obtained by fermentation. Wet BNC membranes produced by static culture were plasticized by impregnation of solutions of either glycerol (BNC gly ) or polyethylene glycol (M W 600) (BNC PEG ). The plasticized BNC was then coated with PHBV solution dissolved in formic acid, and oven dried at 148 °C., Results: Overall, PHBV coating on plasticized BNC reduced water vapor permeability significantly (from 0.990 to 0.032 g.μm.m -2 .day -1 .Pa -1 ) under 50% relative humidity. It increased the hydrophobicity (contact angle from 10-40° to 80-90°) but decreased the stiffness (from 3.1 GPa to 1.3 Gpa) of the composite., Conclusions: Overall, the mechanical and barrier properties of the layered composite obtained were considered suitable for food-packaging applications. The plasticizing (with glycerol or polyethylene glycol) of BNC significantly improved the mechanical performance and the PHBV coating reduced the water affinity (vapor and liquid state) on BNC. © 2022 Society of Chemical Industry., (© 2022 Society of Chemical Industry.)

Background: Deinking is an important part of paper recycling that involves the removal of ink particles from the paper fibres. This industrial process is important so that the fibres can be recirculated back into paper production, which enables better sustainability as fewer fresh fibres are needed. In this study, we examined five different alternative fibre materials from different agricultural residues and industrial processes for the pilot production of papers. Papers containing fibres from invasive plants (Japanese knotweed), dedicated crops (miscanthus, acacia), agricultural residues (tomato stems), and industrial waste (jute - fibres from coffee bags) were printed with water-based flexo inks and deinked with two separate processes (chemical and enzymes). Mechanical (break and tensile index, breaking length) and optical properties (ISO whiteness, brightness and CIE L*a*b* values) were measured and ink elimination IR700 and deinking efficiency was calculated for the two deinking processes., Results: Enzymatic treatment improved the mechanical properties of deinked pulp in comparison with the classic chemical treatment. Mechanical strength for almost all papers increased slightly (breaking length up to 20% in tomato and jute), and the optical result (brightness) increased similarly for both processes due to the bleaching action of the colour-shaded samples, whereas the deinking efficiency showed mixed results between chemical- and enzyme-type deinking (with chemical achieving better elimination measured at 700 nm) in the typical range of ink elimination values (15-35%) for flexographic inks. This indicates further optimization of the deinking with enzymes is needed due to different alternative fibre compositions and variations of residues in the delignification processes., Conclusion: Using a combination of adjusted enzymatic treatment as a precursor for deinking of paper-based packaging materials sourced from alternative fibres showed promising results regarding mechanical properties, whereas the optical properties need to be improved with cellulase optimization or by using mixes of different enzymes. These kinds of paper materials printed with flexo inks were found to be successfully deinkable with the chemical ISO-based deinking protocol. © 2022 Society of Chemical Industry., (© 2022 Society of Chemical Industry.)

Background: Sakacin-A due to its specific antimicrobial activity may represent a good candidate to develop active packaging solutions for food items supporting Listeria growth. In the present study a protein extract containing the bacteriocin sakacin-A, produced by Lactobacillus sakei Lb 706 in a low-cost culture medium containing deproteinized cheese whey, was adsorbed onto cellulose nanofibers (CNFs) to obtain an active material to be used as a mat (or a separator) in direct contact with foods., Results: The applied fermentation conditions allowed 4.51 g L -1 of freeze-dried protein extract to be obtained, characterized by an antimicrobial activity of near 16 700 AU g -1 , that was used for the preparation of the active material by casting. The active material was then characterized by infrared spectra and thermogravimetric analyses. Antimicrobial trials were carried out in vitro using Listeria innocua as indicator strain; results were also confirmed in vivo, employing smoked salmon fillets intentionally inoculated with Listeria innocua: its final population was reduced to about 2.5-3 Log cycles after 28 days of storage at 6 °C in presence of sakacin-A, compared with negative control mats produced without the bacteriocin extract., Conclusion: This study demonstrates the possibility of producing an antimicrobial active material containing sakacin-A absorbed onto CNFs to decrease Listeria population in smoked salmon, a ready-to eat-food product. © 2019 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry., (© 2019 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.)

Background: Collagen-based films including casings with a promising application in meat industry are still needed to improve its inferior performance. In the present study, the reinforcement of carboxylated cellulose nanofibers (CNF) for collagen film, based on inter-/intra- molecular electrostatic interaction between cationic acid-swollen collagen fiber and anionic carboxylated CNF, was investigated., Results: Adding CNF decreased the zeta-potential but increased particle size of collagen fiber suspension, with little effect on pH. Furthermore, CNF addition led to a higher tensile strength but a lower elongation, and the water vapor and oxygen barrier properties were improved remarkably. Because the CNF content was 50 g kg -1 or lower, the films had a homogeneous interwoven network, and CNF homogeneously embedded into collagen fiber matrix according to the scanning electron microscopy and atomic force microscopy analysis. Additionally, CNF addition increased film thickness and opacity, as well as swelling rate., Conclusion: The incorporation of CNF endows collagen fiber films good mechanical and barrier properties over a proper concentration range (≤ 50 g kg -1 collagen fiber), which is closely associated with electrostatic reaction of collagen fiber and CNF and, subsequently, the form of the homogenous, compatible spatial network, indicating a potential applications of CNF in collagenous protein films, such as edible casings. © 2017 Society of Chemical Industry., (© 2017 Society of Chemical Industry.)

Background: An automated and accurate headspace gas chromatographic (HS-GC) technique was investigated for rapidly quantifying water content in edible oils. In this method, multiple headspace extraction (MHE) procedures were used to analyse the integrated water content from the edible oil sample. A simple vapour phase calibration technique with an external vapour standard was used to calibrate both the water content in the gas phase and the total weight of water in edible oil sample. After that the water in edible oils can be quantified., Results: The data showed that the relative standard deviation of the present HS-GC method in the precision test was less than 1.13%, the relative differences between the new method and a reference method (i.e. the oven-drying method) were no more than 1.62%., Conclusion: The present HS-GC method is automated, accurate, efficient, and can be a reliable tool for quantifying water content in edible oil related products and research. © 2017 Society of Chemical Industry., (© 2017 Society of Chemical Industry.)

Background: The incorporation of β-carotene, one of the most common pigments or bioactives, into food formulations has attracted increasing interest from the food industry, due to its good nutrition and potential health effects. However, it is poorly soluble and unstable in water, which greatly limits its applications in foods. This work presented an effective approach to improve the water dispersibility, stability and even bioaccessibility of β-carotene, using soy protein isolate (SPI) to perform as effective nanocarriers for this molecule., Results: The complexation with SPI remarkably improved the water dispersibility and stability against heating and freeze-drying of β-carotene. However, the encapsulation efficiency and stability of β-carotene in the nanocomplexes with SPI were closely dependent on the applied β-carotene-to-protein ratio, at which the complexation occurred. The best improvement of stability was observed at appropriate β-carotene-to-protein ratios, e.g. 10-20 g kg -1 . The complexation with β-carotene mainly occurred on the surface of SPI nanoparticles, through hydrophobic interactions. The complexation resulted in inter-particle aggregation, in a concentration-dependent manner. Almost all of the β-carotene molecules in the nanocomplexes could be progressively released into the aqueous phase., Conclusion: SPI exhibits a good potential to perform as a nanocarrier for enhanced water dispersibility, stability and bioaccessibility of β-carotene. © 2016 Society of Chemical Industry., (© 2016 Society of Chemical Industry.)

Background: Minimally processed ready-to-eat products are considered a high-risk food because of the possibility of contamination with pathogenic bacteria, including Listeria monocytogenes from the animal reservoir, and the minimal processing they undergo. In this study, a sakacin-A anti-Listeria active package was developed and tested on thin-cut veal meat slices (carpaccio)., Results: Enriched food-grade sakacin-A was obtained from a cell-free supernatant of a Lactobacillus sakei culture and applied (0.63 mg cm -2 ) onto the surface of polyethylene-coated paper sheets to obtain an active antimicrobial package. The coating retained antimicrobial features, indicating that the process did not affect sakacin-A functionality, as evidenced in tests carried out in vitro. Thin-cut veal meat slices inoculated with Listeria innocua (a surrogate of pathogenic L. monocytogenes) were laid on active paper sheets. After 48 h incubation at 4 °C, the Listeria population was found to be 1.5 log units lower with respect to controls (3.05 vs 4.46 log colony-forming units (CFU) g -1 )., Conclusion: This study demonstrates the possibility of using an antimicrobial coating containing sakacin-A to inhibit or decrease the Listeria population in ready-to-eat products, thus lowering the risk of food-related diseases. © 2016 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry., (© 2016 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.)

Background: In this study, soy protein isolate/sugar beet pectin (SPI/SBP) emulsion gels were prepared through an enzymatic gelation process. The effects of emulsifier (SBP, SPI or SPI/SBP complex) and emulsification process on the microstructure, texture, breakdown properties and aroma release behavior of resulting emulsion gels were investigated., Results: Oil emulsification by SBP/SPI complex resulted in a higher amount of emulsifier absorbing on the oil-water interface than by SBP and SPI alone, indicating that a more compact interfacial network was formed. Flocculation of oil droplets was observed and corresponding emulsion gels exhibited lower fracture force and strain when the oil was emulsified by SPI and SBP/SPI complex. Moreover, emulsion gels with small droplets produced a greater quantity of small fragments after mastication. However, microstructure did not have a significant effect on breakdown properties of emulsion gels. Headspace gas chromatography analysis showed that the release rate of ethyl butyrate before and after mastication was significantly lower in emulsion gel with more compact network, but the release of aroma compounds with higher hydrophobicity did not show a significant influence of the microstructure and texture of emulsion gel., Conclusion: This finding provides a useful application for designing semi-solid foods with desirable flavor perception. © 2016 Society of Chemical Industry., (© 2016 Society of Chemical Industry.)

Background: Due to the differences in structure and composition of glycinin and β-conglycinin, they exhibit different characteristics during heat treatment. In present study, the thermal aggregation behaviour of glycinin, β-conglycinin and their isolated sub-units was investigated at pH 7.0., Results: Acidic polypeptides, basic polypeptides, αα' and β sub-units of soy protein were denatured during the isolation process. The degree of aggregation of protein fractions after heat treatment was in the order: denatured basic polypeptides > native glycinin > denatured β sub-unit > native β-conglycinin > denatured acidic polypeptides > denatured αα' sub-units. Glycinin, β-conglycinin, acidic polypeptides and αα'/β sub-units exhibited different changing trends of surface hydrophobicity with increasing temperature. The αα' sub-units showed higher ability to suppress thermal aggregation of basic polypeptides than β sub-units during heat treatment. The β sub-units were shown to form soluble aggregates with glycinin after heating., Conclusion: The interaction mechanism of αα' and β sub-units heated with basic polypeptides was proposed. For the β sub-units-basic polypeptides mixed system, more hydrophobic chains were binding together and buried inside during heat treatment, which resulted in lower surface hydrophobicity. The αα' sub-units-basic polypeptides mixed system was considered to be a stable system with higher surface hydrophobicity after being heated., (© 2015 Society of Chemical Industry.)