Search

For the chaotic motion control of a single-degree-of-freedom vibro-impact system with soft constraint, two-parameter cooperative intelligent optimal control method based on LRS-QPSO (i.e., Local Rotational Search Quantum Particle Swarm Optimization) algorithm optimization SVM (i.e., Support Vector Machines) was proposed. Firstly, in the parameter plane (ω,ζ), the motion distribution of the system and the change of the maximum Lyapunov exponent is obtained by numerical simulation, and the correlation between parameters change and the transition from chaotic motion to periodic motion is analyzed. Secondly, by introducing ω and ζ into the construction of the input variables of the SVM controller, a chaotic motion two-parameter cooperative intelligent optimal control strategy is proposed to meet the requirements of expected control objectives. Therefore, by the virtue of nonlinear mapping characteristics of SVM, the combined effects of ω and ζ on the dynamic state transition of the system can be reflected in the output variables of the controller. Finally, with single parameter ω and single parameter ζ as the research object, the bifurcation diagram, Lyapunov exponential spectrum, and controlled periodic motion orbit diagram are analyzed, and the advantages of two-parameter cooperative intelligent optimal control are compared and analyzed. [ABSTRACT FROM AUTHOR]

For the chaotic motion control of a vibro-impact system with clearance, the parameter feedback chaos control strategy based on the data-driven control method is presented in this article. The pseudo-partial-derivative is estimated on-line by using the input/output data of the controlled system so that the compact form dynamic linearization (CFDL) data model of the controlled system can be established. And then, the chaos controller is designed based on the CFDL data model of the controlled system. And the distance between two adjacent points on the Poincaré section is used as the judgment basis to guide the controller to output a small perturbation to adjust the damping coefficient of the controlled system, so the chaotic motion can be controlled to a periodic motion by dynamically and slightly adjusting the damping coefficient of the controlled system. In this method, the design of the controller is independent of the order of the controlled system and the structure of the mathematical model. Only the input/output data of the controlled system can be used to complete the design of the controller. In the simulation experiment, the effectiveness and feasibility of the proposed control method in this article are verified by simulation results. [ABSTRACT FROM AUTHOR]