Search

Background: The aim of this study was to compare the clinical and radiographic outcomes of treatment of symptomatic mal- and/or nonunion of midshaft clavicle fractures using radiographically based free-hand open reduction and internal fixation (ORIF) or computer-assisted 3D-planned, personalized corrective osteotomies performed using patient-specific instrumentation (PSI) and ORIF. The hypotheses were that (1) patients treated with computer-assisted planning and PSI would have a better clinical outcome, and (2) computer-assisted surgical planning would achieve a more accurate restoration of anatomy compared to the free-hand technique. Methods: Between 1998 and 2020, 13 patients underwent PSI, and 34 patients underwent free-hand ORIF and/or corrective osteotomy. After application of exclusion criteria, 12/13 and 11/34 patients were included in the study. The clinical examination included measurement of the active range of motion and assessment of the absolute and relative Constant–Murley Scores and the subjective shoulder value. Subjective satisfaction with the cosmetic result was assessed on a Likert scale from 0 to 100 (subjective aesthetic value). 11/13 and 6/11 patients underwent postoperative computed tomography evaluation of both clavicles. Computed tomography scans were segmented to generate 3D surface models. After projection onto the mirrored contralateral side, displacement analysis was performed. Finally, bony union was documented. The average follow-up time was 43 months in the PSI and 50 months in the free-hand cohort. Results: The clinical outcomes of both groups did not differ significantly. Median subjective shoulder value was 97.5% (70; 100) in the PSI group vs. 90% (0; 100) in the free-hand group; subjective aesthetic value was 86.4% (±10.7) vs. 75% (±18.7); aCS was 82.3 (±10.3) points vs. 74.9 (±26) points; and rCS was 86.7 (±11.3) points vs. 81.9 (±28.1) points. In the free-hand group, 2/11 patients had a postoperative neurological complication. In the PSI cohort, the 3D angle deviation was significantly smaller (PSI/planned vs. free-hand/contralateral: 10.8° (3.1; 23.8) vs. 17.4° (11.6; 42.4); P = .020)). There was also a trend toward a smaller 3D shift, which was not statistically significant (PSI/planned vs. free-hand/contralateral: 6 mm (3.4; 18.3) vs. 9.3 mm (5.1; 18.1); P = .342). There were no other significant differences. A bony union was achieved in all cases. Conclusion: Surgical treatment of nonunion and malunions of the clavicle was associated with very good clinical results and a 100% union rate. This study, albeit in a relatively small cohort with a follow-up of 4 years, could not document any clinically relevant advantage of 3D planning and personalized operative templating over conventional radiographic planning and free-hand surgical fixation performed by experienced surgeons.

Background: Eccentric biconcave (B2) glenoid erosion in primary glenohumeral arthritis is common. There are serious concerns regarding the longevity of fixation of cemented glenoids if anatomic total shoulder arthroplasties (aTSAs) are used in B2 glenoid. The purpose of this study is to analyze the mid- to long-term results of aTSA with B2 glenoids. Methods: This is a retrospective study of a single center experience. Thirty patients (32 shoulders) at an average of 9.2 years (range, 5.0-16.6, ±3.2) after primary TSA were evaluated. Clinical and radiographic outcomes were analyzed. Results: The mean preoperative intermediate glenoid version was −14° ± 7° (range, −2° to −29°) and the mean humeral subluxation according to the plane of the scapula was 67% ± 9% (range, 49%-87%). There was a significant improvement for all the postoperative clinical outcome parameters including the mean absolute and relative Constant Score, subjective shoulder value, active elevation, external rotation, abduction, internal rotation, pain scores, and strength (P

Background: There is little consensus on the best treatment after failed conservative management of recurrent posterior shoulder instability. The purpose of this study was to analyze our clinical and radiological mid-term to long-term results of an open, posterior bone block procedure for the treatment of recurrent posterior shoulder instability. Methods: From 1999 to 2015, 14 patients were included in the study and available for clinical and radiographic follow-up (FU). FU included a standardized physical examination, assessment of the Constant-Murley-Score, subjective shoulder value, American Shoulder and Elbow Surgeons score, and Western Ontario Shoulder Instability Index. Conventional radiographs and a computed tomography (CT)–scan were performed preoperatively and at latest FU. Glenohumeral arthropathy was classified as per Samilson and Prieto. The CT scans were used to evaluate the structure of the graft (resorption, union), graft positioning, glenoid version, centering of the humeral head, and glenoid erosion and morphology. Results: The median age at the time of surgery was 26 years (range 16-41 years) and the median FU period was 9 years (range 4-20 years). The rate of reported dynamic postoperative subluxation and instability was 46% (n = 6) and the rate of dynamic posterior instability during clinical testing at FU was 31% (n = 4). The tested instability rate in the traumatic group was 14% (n = 1) compared to the atraumatic group with 50% (n = 3) during clinical FU. The mean Constant-Murley-Score increased from preoperatively (77 ± 11 points) to postoperatively (83 ± 14 points, P = .158). The last FU showed an American Shoulder and Elbow Surgeons score of 85 ± 12; the Western Ontario Shoulder Instability Index score was 715 ± 475 points. The mean subjective shoulder value increased from 58% ± 19 preoperatively to 73% ± 17 at final FU (P = .005). Degenerative changes increased by at least one grade in 67% of the patients. Mean preoperative glenoid retroversion (CT) was 7.5° ± 6°. The position of the graft was optimal in 86% (n = 12). In 62% of the cases, a major resorption of the graft (Zhu grade II) was observed. Conclusion: The rate of tested recurrent instability at last FU was as high as 31% (n = 4, atraumatic [n = 3] vs. traumatic [n = 1]) after a median FU of 9 years. Given the moderate improvement of clinical outcome scores, shoulder stability and the increase of degenerative joint changes by at least one grade (Samilson/Prieto) in 67% of patients, a posterior bone block procedure is not a uniformly satisfying treatment option for recurrent posterior shoulder subluxation, especially in cases of atraumatic posterior instability.

Background: Isolated or combined subscapularis (SSC) tendon tears are frequently found in patients with shoulder pain. The purpose of this study was to evaluate the structural changes associated with SSC tear in a consecutive series of patients with nonoperatively treated small size to midsize SSC tendon tears using magnetic resonance imaging (MRI). Methods: In this retrospective case series, all patients with an isolated or combined SSC tendon tear treated nonoperatively between 1999 and 2019 were identified from our MRI and clinical databases. Twenty-one patients with a mean age of 52.6 years (range 26.6-64.8, standard deviation 9.3) with a second MRI scan at a minimum of 5 years of follow-up were enrolled. The mean follow-up was 8.6 years (range 5.6-12.6, standard deviation 1.8). Initial and last follow-up MRI scans were used to determine concomitant cuff lesions, size of the SSC tear, fatty infiltration of the SSC muscle, and biceps pathology. Results: Five patients had an isolated SSC lesion; 7 patients had a concomitant tear of the supraspinatus, and 9 patients had a supraspinatus and anterior infraspinatus tendon tear. At diagnosis, 14 patients had a type 1 SSC lesion as classified by Lafosse et al, 4 patients had type 2, and 3 patients had type 3 lesions. Nineteen patients (90%) were found to have an SSC tear progression of at least one Lafosse grade (P

Background: The treatment of complex proximal humerus fractures with hemiarthroplasty is associated with a high failure rate due to secondary displacement of the tuberosities. It was the aim of this in-vitro study to compare the mechanical stability of tuberosity reattachment obtained with the so-called “Cow-Hitch” (CH) cerclage compared with conventional tuberosity reattachment. Methods: A 4-part proximal humerus fracture was created in 10 fresh-frozen, human cadaveric shoulders. The greater and lesser tuberosity were reattached to the hemiarthroplasty stem with in total 4 CH Cerclages in the Cow-Hitch group. The conventional technique—recommended for the tested implant—was used in the control group using 6 sutures. A total of 5000 loading cycles with forces of 350N were applied, while motion (in mm) of the tuberosities was recorded in 3 directions (anteroposterior = AP, mediolateral = ML, inferosuperior = IS) with a telecentric camera. Results: After 5000 loading cycles, the CH group showed less fragment displacement (AP: 2.3 ± 2.3 mm, ML: 1.8 ± 0.9 mm, IS: 1.3 ± 0.5 mm) than the conventional group (AP: 9.8 ± 12.3 mm, ML: 5.5 ± 5.6 mm, IS: 4.5 ± 4.7 mm). The differences were not statistically significant (AP: P = .241; ML: P = .159; IS: P = .216). The lesser tuberosity fragment displacement in the CH group after 5000 cycles was less in the AP (2.3 ± 3.3 vs. 4.0 ± 2.8, P = .359) and IS (1.9 ± 1.2 vs. 3.1 ± 1.8; P = .189) directions but higher in the ML direction (7.2 ± 5.7 vs 6.3 ± 3.6, P = .963). Conclusions: In-vitro, “Cow-Hitch” cerclage results in mean greater tuberosity displacements of 2 mm and reliably prevents displacements greater than 5 mm. In contrast, the conventional fixation technique yields unreliable, variable stability with low to complete displacement upon cyclical loading.

Background: Functional internal rotation (fIR) of the shoulder is frequently limited after reverse shoulder arthroplasty (RTSA). The objective of this study was to study a cohort of satisfied patients after RTSA who had comparable active mobility except for fIR and to identify factors associated with selective loss of fIR. Methods: A retrospective cohort study was conducted to compare 2 patient groups with either poor (≤ 2 points in the Constant-Murley score [CS]) or excellent (≥8 points in CS) fIR after RTSA at a minimum follow-up of 2 years. Influencing factors (demographic, surgical or implant related, radiographic parameters) and clinical outcome were analyzed. Results: Fifty-two patients with a mean age of 72.8 (±9.3) and a mean follow-up of 41 months were included in the IR≤2 group and 63 patients with a mean age of 72.1 (±8.0) and a mean follow-up of 59 months in the IR≥8 group. All patients had undergone RTSA with the same implant type and only 2 different glenosphere sizes (36 and 40) for comparable indications. A multivariate analysis identified the following significant risk factors for poor postoperative fIR: poor preoperative fIR (pts in CS: 3 [range: 2-6] vs. 6 [range: 4-8], P

Background: The biomechanical effects of joint-line medialization during shoulder surgery are poorly understood. It was therefore the purpose of this study to investigate whether medialization of the joint line especially associated with total shoulder arthroplasty leads to changes in the rotator cuff muscle forces required to stabilize the arm in space. Methods: A validated computational 3-D rigid body simulation model was used to calculate generated muscle forces, instability ratios, muscle-tendon lengths and moment arms during scapular plane elevation. Measurements took place with the anatomical and a 2 mm and 6 mm lateralized or medialized joint line. Results: When the joint line was medialized, increased deltoid muscle activity was recorded throughout glenohumeral joint elevation. The rotator cuff muscle forces increased with medialization of the joint line in the early phases of elevation. Lateralization of the joint line led to higher rotator cuff muscle forces after 52° of glenohumeral elevation and to higher absolute values in muscle activity. A maximum instability ratio of >0.6 was recorded with 6 mm of joint-line medialization. Conclusion: In this biomechanical study, medialization and lateralization of the normal joint line during total shoulder arthroplasty led to substantial load changes on the shoulder muscles used for stabilizing the arm in space. Specifically, medialization does not only lead to muscular shortening but also to increased load on the supraspinatus tendon during early arm elevation, the position which is already most loaded in the native joint.

Background: The treatment of complex proximal humerus fractures in the elderly with reverse total shoulder arthroplasty is an established treatment option. Healing of the greater tuberosity (GT) is associated with better outcomes. It was the aim of this cadaver study to compare the stability of GT refixation obtained with the so-called “cow hitch” cerclage fixation with that of the recommended standard suture cerclage technique. Methods: A 4-part proximal humerus fracture was created in 10 fresh-frozen, human cadaveric shoulders. A CT was performed preoperatively to ensure the comparability of bone density and fracture patterns. In the experimental group the GT was reattached to the stem of the reverse total shoulder arthroplasty with the “cow hitch” suture cerclage (CH) technique, the conventional (CON) technique recommended for the tested implant was used in the control group. Humeri were tested with a uniaxial material testing machine. In total, 5000 loading cycles with forces from 250 to 350N were applied while motion (in mm) of the tuberosities was recorded with a telecentric camera. Results: After 5000 loading cycles, the CH group showed a significantly smaller displacement of the bone fragment (0.74 ± 0.31 mm) than the CON group [2.29 ± 1.08 mm (P < .05)]. After the first three cycles the mean displacement was 0.14 mm (±0.12) in the CH and 1.42 mm (±0.21) in the CON (P < .0001) groups. Conclusions: GT reattachment with the “cow hitch” suture cerclage showed a significantly more stable fixation compared with the currently for the used prosthetic system recommended suture cerclage technique in an in vitro 4-part proximal humeral fracture model.

Background: There is evidence that specific variants of scapular morphology are associated with dynamic and static posterior shoulder instability. To this date, observations regarding glenoid and/or acromial variants were analyzed independently, with two-dimensional imaging or without comparison with a healthy control group. Therefore, the purpose of this study was to analyze and describe the three-dimensional (3D) shape of the scapula in healthy and in shoulders with static or dynamic posterior instability using 3D surface models and 3D measurement methods. Methods: In this study, 30 patients with unidirectional posterior instability and 20 patients with static posterior humeral head subluxation (static posterior instability, Walch B1) were analyzed. Both cohorts were compared with a control group of 40 patients with stable, centered shoulders and without any clinical symptoms. 3D surface models were obtained through segmentation of computed tomography images and 3D measurements were performed for glenoid (version and inclination) and acromion (tilt, coverage, height). Results: Overall, the scapulae of patients with dynamic and static instability differed only marginally among themselves. Compared with the control group, the glenoid was 2.5° (P = .032), respectively, 5.7° (P = .001) more retroverted and 2.9° (P = .025), respectively, 3.7° (P = .014) more downward tilted in dynamic, respectively, static instability. The acromial roof of dynamic instability was significantly higher and on average 6.2° (P = .007) less posterior covering with an increased posterior acromial height of +4.8mm (P = .001). The acromial roof of static instability was on average 4.8° (P = .041) more externally rotated (axial tilt), 7.3° (P = .004) flatter (sagittal tilt), 8.3° (P = .001) less posterior covered with an increased posterior acromial height of +5.8 mm (0.001). Conclusion: The scapula of shoulders with dynamic and static posterior instability is characterized by an increased glenoid retroversion and an acromion that is shorter posterolaterally, higher, and more horizontal in the sagittal plane. All these deviations from the normal scapula values were more pronounced in static posterior instability.

Background: Arthroscopic rotator cuff repair techniques have almost replaced open repairs. Short- and mid-term studies have shown comparable outcomes, with no clear superiority of either procedure. The aim of this study was to compare the long-term clinical and imaging outcomes following arthroscopic or open rotator cuff repair. Methods: Forty patients with magnetic resonance imaging (MRI)–documented, symptomatic supraspinatus or supraspinatus and infraspinatus tears were randomized to undergo arthroscopic or open rotator cuff repair. Clinical and radiographic follow-up was obtained at 6 weeks, 3 months, 1 year, 2 years, and >10 years postoperatively. Clinical assessment included measurement of active range of motion, visual analog scale score for pain, functional scoring according to the Constant-Murley score (CS), and assessment of the Subjective Shoulder Value. Imaging included conventional radiography and MRI for the assessment of cuff integrity and alteration of the deltoid muscle. Results: We enrolled 20 patients with a mean age of 60 years (range, 50-71 years; standard deviation [SD], 6 years) in the arthroscopic surgery group and 20 patients with a mean age of 55 years (range, 39-67 years; SD, 8 years) in the open surgery group. More than 10 years’ follow-up was available for 13 patients in the arthroscopic surgery group and 11 patients in the open surgery group, with mean follow-up periods of 13.8 years (range, 11.9-15.2 years; SD, 1.1 years) and 13.1 years (range, 11.7-15 years; SD, 1.1 years), respectively. No statistically significant differences in clinical outcomes were identified between the 2 groups: The median absolute CS was 79 points (range, 14-84 points) in the arthroscopic surgery group and 84 points (range, 56-90 points) in the open surgery group (P = .177). The median relative CS was 94% (range, 20%-99%) and 96% (range, 65%-111%), respectively (P = .429). The median Subjective Shoulder Value was 93% (range, 20%-100%) and 93% (range, 10%-100%), respectively (P = .976). MRI evaluation showed a retear rate of 30% equally distributed between the 2 groups. Neither fatty infiltration of the deltoid muscle, deltoid muscle volume, nor the deltoid origin were different between the 2 groups. Conclusion: In a small cohort of patients, we could not document any difference in clinical and radiographic outcomes at long-term follow-up between arthroscopic and open rotator cuff repair. The postulated harm to the deltoid muscle with the open technique could not be confirmed.