Search

Pre-hydrolysis-kraft of Eucalyptus globulus by autohydrolysis (batch) and with dilute acid hydrolysis (flow-through reactor) were explored in this study, to examine the recovery of xylooligosaccharides (XOs) from the pre-hydrolysis treatment. The results of this work support the potential reuse of the hydrolysate to increase the recovery yield of added value compounds. The pH of the dilute acid hydrolysis was maintained at 3.5 with acetic acid, to mimic the conditions of the batch reactor medium (autohydrolysis). An increase of XOs recovered was evident when the pre-treatment was in the flow-through reactor instead of the batch reactor. In the latter, a high concentration of furfural was recovered, showing the influence of time in XO conversion through hydrolysis. The total yield of pulp was higher in the flow-through reactor (36.4%) in comparison with the batch system (34.5%) after kraft pulping, which was expected, given the increasing time that the hydrolysate was present in the reactor; however, the difference was small and could have been the result of precipitated compounds in the latter, so this needs further analysis. Keywords: cellulose, Eucalyptus globulus, pre-hydrolysis kraft, xylooligosaccharides

Technologies based on microalgae-bacteria seem to be sustainable options for wastewater treatment and reuse, with lower costs than conventional biological treatment technologies. Furthermore, they can generate added-value products produced from algae biomass. Among other advantages, the consortium bacteriaalgae produce photosynthetic oxygen through the microalgae, which can be used by aerobic bacteria for oxidizing organic matter and nitrogen, thus reducing the need for introducing artificial oxygen. In this review paper, the main systems that use microalgaebacteria consortium are discussed. Microalgae-bacteria present advantages in the removal of organics, nitrogen and phosphorus, when compared with conventional biological treatment systems (e.g., activated sludge, percolating filters and ponds), and are able to produce final effluents for reuse (e.g., in agricultural irrigation, industry or aquifer recharge) and excess of microalgae that can be converted to added-value products such as biogas and biofuels. Attention is given to the innovative aspects of applying photobioreators to the treatment and reuse of pulp and paper effluents and fiber-waste-based recycling wastewaters, which seems to open a new opportunity for the pulp, paper and recycling paper industries. Keywords: fiber-waste-based industry, microalgae-bacteria consortium, removal of nutrients, wastewater treatment

Hardwood species have a complex cellular structure consisting of fibres, vessel elements and parenchyma cells with different chemical compositions. However, the presence of vessels with significant dimensions in their structure is a recurrent problem in the operation of industrial UWF paper printing. Since the 1980s, vessel picking and ink refusal are problems that paper professionals have tried to solve, but solutions for these have not yet been fully found. If vessels are concentrated in a stream, they can be pre-treated (e.g., by mechanical refining) and reincorporated into the pulp. Other strategies aim at vessel enzymatic and/or chemical passivation and sheet surface chemical treatment, altering the vessel adhesion to the fibre network. This requires vessel concentration at laboratorial level for proper chemical studies, such as FE-SEM, μ-XPS, TOF-SIMS and μFTIR. The main objective of our experimental study was to examine bleached kraft pulp E. globulus vessel and fibre composition. For this we performed EDX and μ-FTIR analysis on both fibre and vessel elements, and obtained the carbohydrate composition, the total acids content, the hexenuronic acids content and the zeta potential. Keywords: E. globulus, vessel, EDX, μ-FTIR, sugar content, zeta potential

High consumption of clean water results in the generation of effluents that need to be treated and then safely discarded. Conventional methods for such treatment often do not offer an economical and sustainable result; therefore, new methods are needed, such as microalgae usage. Microalgae are unicellular beings capable of rapid adaptation, growth, and production of compounds of interest (pharmaceuticals, biofuels and others). This work aimed to study the effectiveness of the microalgae Selenastrum sp. in the treatment of effluents from the textile and pulp & paper industries, as well as the respective effects on its biomass development and accumulation of compounds. Four types of culture were carried out (for each type of effluent, a control, and a control with addition of glucose) lasting eight days, in duplicate, all with the addition of a standard culture medium and controlled abiotic factors. Analyses for compound removal (chemical oxygen demand and colour readings on the 200–800nm range) and biomass development (cell number, its dimensions, and weight) were performed four times during the process. At the end of the experiments, the average removal in effluents for COD and colour were 56.6% and 32.7% respectively, in addition to a biomass accumulation of 0.45 g/L. These results were comparable to those obtained for the control cultivation using glucose as a carbon source (70.0% COD removal and 0.51 g/L biomass accumulation). These results demonstrate the effectiveness of Selenastrum sp. in the treatment of industrial effluents, its resilience in stressful environments and the potential use of its accumulated compounds for biotechnological purposes. Keywords: microalgae, Selenastrum sp., industrial effluent, textile effluent, pulp effluent, effluent treatment