Search

Purpose: A bilateral fixed-angle plate was biomechanically compared to the two currently preferred methods of osteosynthesis for transverse patella fractures. It was hypothesized that the new angle-stable implant would provide a secure and sustainable fracture fixation, superior to the established standard techniques. Methods: Twenty-one identical patellae made of polyurethane foam (Sawbones), osteotomized to create a transverse two-part fracture, were fixed with modified anterior tension wiring, cannulated lag screws with anterior tension wiring or bilateral polyaxial 2.7-mm fixed-angle plates. The testing protocol consisted of 10,000 repetitive cycles using a non-destructive physiological load between 100 and 300 N at a simulated knee flexion of 60°. Results: All 21 Sawbone-patellae sustained repetitive loading up to 10,000 cycles without failing. The anterior tension wire group displayed significant displacement of the fracture gap (0.7 ± 0.2 mm) during cyclic loading, while both lag screws with tension wiring and bilateral fixed-angle plates showed no fracture gap widening at all ( p < 0.01). Conclusion: The bilateral fixed-angle plate and cannulated lag screws with anterior tension wiring preserved a constantly reduced fracture gap over 10,000 tensile cycles in contrast to modified anterior tension wiring, which exhibited significant widening of the gap after initial loading. Results of in vitro testing indicate that bilateral fixed-angle plates provide sustainable fixation stability offering a promising new option in the treatment for transverse patella fractures. [ABSTRACT FROM AUTHOR]

Purpose: Displaced tibial eminence fractures require surgical fixation in order to obtain a stable knee joint. Suture fixation with FiberWire(®) seems to be the most favorable therapeutic option. Biomechanical studies show failure of this technique most commonly due to a suture cutout with subsequent fracture of the tibial eminence fragment. The goal of this study is to compare the biomechanical properties of three different techniques of suture fixation using FiberWire(®).Methods: Bone mineral density was evaluated in 18 human knee specimens by pqCT, and three similar groups were formed. A standardized anterior tibial eminence fracture was created, and suture fixation was performed using one of three different techniques in 6 specimens each. Cyclic and destructive testing was conducted.Results: Significant differences between the three techniques could be shown neither in the cycles needed to achieve a steady state nor in a failure load or initial stiffness. Almost all specimens failed by suture cutout.Conclusion: The presented modification of the existing technique for suture fixation of tibial eminence fractures did not lead to an increased initial stability nor did it lower the rate of suture cutout. All tested suture techniques showed comparable initial stiffness and failure load. [ABSTRACT FROM AUTHOR]

Purpose: Displaced tibial eminence fractures require surgical fixation in order to obtain a stable knee joint. Suture fixation with FiberWire seems to be the most favorable therapeutic option. Biomechanical studies show failure of this technique most commonly due to a suture cutout with subsequent fracture of the tibial eminence fragment. The goal of this study is to compare the biomechanical properties of three different techniques of suture fixation using FiberWire. Methods: Bone mineral density was evaluated in 18 human knee specimens by pqCT, and three similar groups were formed. A standardized anterior tibial eminence fracture was created, and suture fixation was performed using one of three different techniques in 6 specimens each. Cyclic and destructive testing was conducted. Results: Significant differences between the three techniques could be shown neither in the cycles needed to achieve a steady state nor in a failure load or initial stiffness. Almost all specimens failed by suture cutout. Conclusion: The presented modification of the existing technique for suture fixation of tibial eminence fractures did not lead to an increased initial stability nor did it lower the rate of suture cutout. All tested suture techniques showed comparable initial stiffness and failure load. [ABSTRACT FROM AUTHOR]