Search

Live-imaging of C. elegans is essential for the study of conserved cellular pathways (e.g. EGFR/Wnt signaling) and morphogenesis in vivo. However, the usefulness of live imaging as a research tool has been severely limited by the need to immobilize worms prior to and during imaging. Conventionally, immobilization is achieved by employing both physical and chemical interventions. These are known to significantly affect many physiological processes, and thus limit our understanding of dynamic developmental processes. Herein we present a novel, easy-to-use microfluidic platform for the long-term immobilization of viable, normally developing C. elegans, compatible with image acquisition at high resolution, thereby overcoming the limitations associated with conventional worm immobilization. The capabilities of the platform are demonstrated through the continuous assessment of anchor cell (AC) invasion and distal tip cell (DTC) migration in larval C. elegans and germ cell apoptosis in adult C. elegans in vivo for the first time. ispartof: LAB ON A CHIP vol:18 issue:9 pages:1359-1368 ispartof: location:England status: published

In recent years, high-speed imaging has become increasingly effective for the rapid analysis of single cells in flowing environments. Single cell imaging methods typically incorporate a minimum magnification of 10× when extracting sizing and morphological information. Although information content may be significantly enhanced by increasing magnification, this is accompanied by a corresponding reduction in field of view, and thus a decrease in the number of cells assayed per unit time. Accordingly, the acquisition of high resolution data from wide field views remains an unsolved challenge. To address this issue, we present an optofluidic flow cytometer integrating a refractive, microlens array (MLA) for imaging cells at high linear velocities, whilst maximizing the number of cells per field of view. To achieve this, we adopt an elasto-inertial approach for cell focusing within an array of parallel microfluidic channels, each equipped with a microlens. We characterize the optical performance of the microlenses in terms of image formation, magnification and resolution using both ray-tracing simulations and experimental measurements. Results demonstrate that the optofluidic platform can efficiently count and magnify micron-sized objects up to 4 times. Finally, we demonstrate the capabilities of the platform as an imaging flow cyclometer, demonstrating the efficient discrimination of hB and Jurkat cells at throughputs up to 50 000 cells per second.

Centrifugal microfluidic platforms have significant potential in commercial applications because of their operational flexibility and minimal external infrastructure requirements. However, the dynamic and real-time control of fluid flow within traditional centrifugal microfluidic platforms is problematic. To address this significant limitation, we propose a two degrees of freedom platform, in which a digital servo is located at each end of an arm driven by a motor. This allows for reversible inward pumping between multiple chambers with perfect efficiency. Furthermore, the addition of a second degree of freedom allows position-based pressure controlled burst valves to be accessed and operated in an independent fashion. To demonstrate the efficacy of this technical innovation, we show rapid and configurable flow switching between three target chambers within a centrifugal microfluidic device., Lab on a Chip, 16 (7), ISSN:1473-0197, ISSN:1473-0189

Soil is the habitat of countless organisms and encompasses an enormous variety of dynamic environmental conditions. While it is evident that a thorough understanding of how organisms interact with the soil environment may have substantial ecological and economical impact, current laboratory-based methods depend on reductionist approaches that are incapable of simulating natural diversity. The application of Lab-on-a-Chip or microfluidic technologies to organismal studies is an emerging field, where the unique benefits afforded by system miniaturisation offer new opportunities for the experimentalist. Indeed, precise spatiotemporal control over the microenvironments of soil organisms in combination with high-resolution imaging has the potential to provide an unprecedented view of biological events at the single-organism or single-cell level, which in turn opens up new avenues for environmental and organismal studies. Herein we review some of the most recent and interesting developments in microfluidic technologies for the study of soil organisms and their interactions with the environment. We discuss how so-called "Soil-on-a-Chip" technology has already contributed significantly to the study of bacteria, nematodes, fungi and plants, as well as inter-organismal interactions, by advancing experimental access and environmental control. Most crucially, we highlight where distinct advantages over traditional approaches exist and where novel biological insights will ensue.

There is a recognized and growing need for rapid and efficient cell assays, where the size of microfluidic devices lend themselves to the manipulation of cellular populations down to the single cell level. An exceptional way to analyze cells independently is to encapsulate them within aqueous droplets surrounded by an immiscible fluid, so that reagents and reaction products are contained within a controlled microenvironment. Most cell encapsulation work has focused on the development and use of passive methods, where droplets are produced continuously at high rates by pumping fluids from external pressure-driven reservoirs through defined microfluidic geometries. With limited exceptions, the number of cells encapsulated per droplet in these systems is dictated by Poisson statistics, reducing the proportion of droplets that contain the desired number of cells and thus the effective rate at which single cells can be encapsulated. Nevertheless, a number of recently developed actively-controlled droplet production methods present an alternative route to the production of droplets at similar rates and with the potential to improve the efficiency of single-cell encapsulation. In this critical review, we examine both passive and active methods for droplet production and explore how these can be used to deterministically and non-deterministically encapsulate cells.

The past decade has seen a steady rise in the use of microfluidic reactors for nanocrystal synthesis, with numerous studies reporting improved reaction control relative to conventional batch chemistry. However, flow synthesis procedures continue to lag behind batch methods in terms of chemical sophistication and the range of accessible materials, with most reports having involved simple one- or two-step chemical procedures directly adapted from proven batch protocols. Here we examine the current status of microscale methods for nanocrystal synthesis, and consider what role microreactors might ultimately play in laboratory-scale research and industrial production., Lab on a Chip, 14 (17), ISSN:1473-0197, ISSN:1473-0189

We report a novel wash-free magnetic immunoassay technique for prostate-specific antigen (PSA) that uses a surface-enhanced Raman scattering (SERS)-based microdroplet sensor. The magnetic bar embedded in a droplet-based microfluidic system segregates the free and bound SERS tags by splitting the droplets into two smaller parts. The presence of PSA targets leads more SERS tags to immunocomplex in one droplet so that fewer SERS tags remain in another supernatant solution droplet. Thus, SERS signal measurement enables the quantitative evaluation of PSA markers. This approach can provide a rapid and sensitive assay that is applicable for PSA cancer markers in serum without any washing. Specifically, SERS signals were measured at 174 droplets per minute and averaged for quantitative evaluation of PSA. The limit of detection (LOD) determined by our SERS-based microdroplet sensor was estimated to be below 0.1 ng mL(-1), which is significantly below the clinical cut-off value for the diagnosis of prostate cancer. In addition, because the entire assay can be carried out automatically, only a minimal amount of sample is needed. Accordingly, the approach is expected to be useful as a potential clinical tool for the early diagnosis of prostate cancer.

Herein we demonstrate the segmentation of alginate solution streams to generate alginate fibers of precisely controllable lengths between 200 and 1000 μm. Moreover, we demonstrate the subsequent encapsulation of the formed fibers within pL-volume microdroplets, produced within the same microfluidic device, in a direct manner. Finally, we show immediate and complete on-chip gelation of alginate fibers in a rapid and reproducible fashion.

We report the use of a porous polytetrafluoroethylene capillary for the inline separation of liquid–liquid segmented flows, based on the selective wetting and permeation of the porous capillary walls by one of the liquids. Insertion of a narrow flow restriction at the capillary outlet allows the back pressure to be tuned for multiple liquid–liquid combinations and flow conditions. In this way, efficient separation of aqueous–organic, aqueous–fluorous and organic–fluorous segmented flows can be readily achieved over a wide range of flow rates. The porous-capillary-separator enables the straightforward regeneration of a continuous flow from a segmented flow, and may be applied to various applications, including inline analysis, biphasic reactions, and purification. As a demonstration of the latter, we performed a simple inline aqueous–organic extraction of the pH indicator 2,6-dichloroindophenol. An aqueous solution of the conjugate base was mixed with hydrochloric acid in continuous flow to protonate the indicator and render it organic-soluble. The indicator was then extracted from the aqueous feed into chloroform using a segmented flow. The two liquids were finally separated inline using a porous PTFE capillary, with the aqueous phase emerging as a continuous stream from the separator outlet. UV-visible absorption spectroscopy showed the concentration of indicator in the outflowing aqueous phase to be less than one percent of its original value, confirming the efficacy of the extraction and separation process.

We report the fabrication of non-emissive short- and long-pass filters on plastic for high sensitivity fluorescence detection. The filters were prepared by overnight immersion of titania-coated polyethylene terephthalate (PET) in an appropriate dye solution - xylene cyanol for short-pass filtering and fluorescein disodium salt for long-pass filtering - followed by repeated washing to remove excess dye. The interface between the titania and the dye molecule induces efficient quenching of photo-generated excitons in the dye molecule, reducing auto-fluorescence to negligible values and so overcoming the principal weakness of conventional colour filters. Using the filters in conjunction with a 505 nm cyan light-emitting diode and a Si photodiode, dose-response measurements were made for T8661 Transfluosphere beads in the concentration range 1 × 10(9) to 1 × 10(5) beads μL(-1), yielding a limit of detection of 3 × 10(4) beads μL(-1). The LED/short-pass filter/T8661/long-pass filter/Si-photodiode combination reported here offers an attractive solution for sensitive, low cost fluorescence detection that is readily applicable to a wide range of bead-based immunodiagnostic assays.

We demonstrate a compact, low cost and practical fluorescence detection system for lab-on-a-chip applications. The system comprises a commercially available InGaN light emitting diode (501 nm) as light source, an organic or silicon photodiode detector, absorptive dye coated colour filters and linear and reflective polarisers. An injection moulded polystyrene microfluidic chip is used as the platform for fluorescence immunoassays for cardiac markers myoglobin and CK-MB. The optical limit of detection (LOD) is measured using a TransFluoSphere® suspension at 5.6 × 10(4) beads µl(-1) which can be equated to ∼3 nM fluorescein equivalent concentration. The LOD for the human plasma immunoassays is measured as 1.5 ng ml(-1) for both myoglobin and CK-MB.

Correction for ‘Long-term C. elegans immobilization enables high resolution developmental studies in vivo’ by Simon Berger et al., Lab Chip, 2018, 18, 1359–1368.

We describe an autonomous ‘black-box’ system for the controlled synthesis of fluorescent nanoparticles. The system uses a microfluidic reactor to carry out the synthesis and an in-line spectrometer to monitor the emission spectra of the emergent particles. The acquired data is fed into a control algorithm which reduces each spectrum to a scalar ‘dissatisfaction coefficient’ and then intelligently updates the reaction conditions in an effort to minimise this coefficient and so drive the system towards a desired goal. In the tests reported here, CdSe nanoparticles were prepared by separately injecting solutions of CdO and Se into the two inlets of a heated y-shaped microfluidic reactor. A noise-tolerant global search algorithm was then used to efficiently identify—without any human intervention—the injection rates and temperature that yielded the optimum intensity for a chosen emission wavelength.

The synthesis of one-dimensional titanium oxide nanostructures has been accelerated by performing the reaction in a microfluidic environment as opposed to a classical batch process.

We report the use of solution-processed thin-film organic photodiodes for microscale chemiluminescence. The active layer of the photodiodes comprised a 1 : 1 blend by weight of the conjugated polymer poly(3-hexylthiophene) [P3HT] and [6,6]-phenyl-C(61)-butyric acid-methylester [PCBM]--a soluble derivative of C(60). The devices had an active area of 1 mm x 1 mm, and a broad-band response from 350 to 700 nm, with an external quantum efficiency of more than 50% between 450 and 550 nm. The photodiodes have a simple layered structure that permits facile integration with planar chip-based systems. To evaluate the suitability of the organic devices as integrated detectors for microscale chemiluminescence, a peroxyoxalate based chemiluminescence reaction (PO-CL) was monitored within a poly(dimethyl-siloxane) (PDMS) microfluidic device. Quantitation of hydrogen peroxide indicated excellent linearity and yielded a detection limit of 10 microM, comparable with previously reported results using micromachined silicon microfluidic chips with integrated silicon photodiodes. The combination of organic photodiodes with PDMS microfluidic chips offers a means of creating compact, sensitive and potentially low-cost microscale CL devices with wide-ranging applications in chemical and biological analysis and clinical diagnostics.

As a first step towards a fully disposable stand-alone diagnostic microchip for determination of urinary human serum albumin (HSA), we report the use of a thin-film organic light emitting diode (OLED) as an excitation source for microscale fluorescence detection. The OLED has a peak emission wavelength of 540 nm, is simple to fabricate on flexible or rigid substrates, and operates at drive voltages below 10 V. In a fluorescence assay, HSA is reacted with Albumin Blue 580, generating a strong emission at 620 nm when excited with the OLED. Filter-less discrimination between excitation light and generated fluorescence is achieved through an orthogonal detection geometry. When the assay is performed in 800 microm deep and 800 microm wide microchannels on a poly(dimethylsiloxane)(PDMS) microchip at flow rates of 20 microL min(-1), HSA concentrations down to 10 mg L(-1) can be detected with a linear range from 10 to 100 mg L(-1). This sensitivity is sufficient for the determination of microalbuminuria (MAU), an increased urinary albumin excretion indicative of renal disease (clinical cut-off levels: 15-40 mg L(-1)).

We report the use of a thin-film polymer light emitting diode as an integrated excitation source for microfabricated capillary electrophoresis. The polyfluorene-based diode has a peak emission wavelength of 488 nm, an active area of 40 microm x 1000 microm and a thickness of similar 2 mm. The simple layer-by-layer deposition procedures used to fabricate the polymer component allow facile integration with planar chip-based systems. To demonstrate the efficacy of the approach, the polyfluorene diode is used as an excitation source for the detection of fluorescent dyes separated on-chip by electrophoresis. Using a conventional confocal detection system the integrated pLED is successfully used to detect fluorescein and 5-carboxyfluorescein at concentrations as low as 10(-6) M with a mass detection limit of 50 femtomoles. The drive voltages required to generate sufficient emission from the polymer diode device are as low as 3.7 V.

Isoelectric focusing (IEF) is a powerful and widely used technique for protein separation and purification. There are many embodiments of microscale IEF that use capillary or microfluidic chips for the analysis of small sample volumes. Nevertheless, collecting the separated sample volumes without causing remixing remains a challenge. Herein, we describe a microfluidic Slipchip device that is able to efficiently compartmentalize focused analyte bands in situ into microdroplets. The device contains a microfluidic “zig-zag” separation channel that is composed of a sequence of wells formed in the two halves of the Slipchip. The analytes are focused in the channel and then compartmentalised into droplets by slipping the chip. Importantly, sample droplets can be analysed on chip or collected for subsequent analysis using electrophoresis or mass spectrometry for example. To demonstrate this approach, we perform IEF separation using standard markers and protein samples, with on-chip post-processing. Compared to alternative approaches for sample collection, the method avoids remixing, is scalable and is easily hyphenated with the other analytical methods.

Liposome structures have a wide range of applications in biology, biochemistry, and biophysics. As a result, several methods for forming liposomes have been developed. This review provides a critical comparison of existing microfluidic technologies for forming liposomes and, when applicable, a comparison with their analogous macroscale counterparts. The properties of the generated liposomes, including size, size distribution, lamellarity, membrane composition, and encapsulation efficiency, form the basis for comparison. We hope that this critique will allow the reader to make an informed decision as to which method should be used for a given biological application.

We describe the use of two passive components to achieve controllable and alternating droplet generation in a microfluidic device. The approach overcomes the problems associated with irregularities in channel dimensions and fluid flow rates, and allows precise pairing of alternating droplets in a high-throughput manner. We study droplet generation and self-synchronization in a quantitative fashion by using high-speed image analysis.

The exploitation of microdroplets produced within microfluidic environments has recently emerged as a new and exciting technological platform for applications within the chemical and biological sciences. Interest in microfluidic systems has been stimulated by a range of fundamental features that accompany system miniaturization. Such features include the ability to process and handle small volumes of fluid, improved analytical performance when compared to macroscale analogues, reduced instrumental footprints, low unit cost, facile integration of functional components and the exploitation of atypical fluid dynamics to control molecules in both time and space. Moreover, microfluidic systems that generate and utilize a stream of sub-nanolitre droplets dispersed within an immiscible continuous phase have the added advantage of allowing ultra-high throughput experimentation and being able to mimic conditions similar to that of a single cell (in terms of volume, pH, and salt concentration) thereby compartmentalizing biological and chemical reactions. This review provides an overview of methods for generating, controlling and manipulating droplets. Furthermore, we discuss key fields of use in which such systems may make a significant impact, with particular emphasis on novel applications in the biological and physical sciences.

We describe a simple technique for fabricating non-emissive colour filters based on the sensitisation of a highly porous nanostructured metal-oxide film with a monolayer of dye molecules. Ultrafast electron transfer at the oxide/dye interface induces efficient quenching of photogenerated excitons in the dye, reducing the photoluminescence quantum yield by many orders of magnitude. The resultant filters exhibit much less autofluorescence than conventional colour filters (where the chromophore is dispersed in a glass or polymer host), and are a viable low cost alternative to interference filters for microfluidic devices and other applications requiring non-emissive filtering.

We report the fabrication of high quality monolithically integrated optical long-pass filters, for use in disposable diagnostic microchips. The filters were prepared by incorporating dye molecules directly into the microfluidic chip substrate, thereby providing a fully integrated solution that removes the usual need for discrete optical filters. In brief, lysochrome dyes were added to a poly(dimethylsiloxane) (PDMS) monomer prior to moulding of the microchip from a structured SU-8 master. Optimum results were obtained using 1 mm layers of PDMS doped with 1200 microg mL(-1) Sudan II, which resulted in less than 0.01% transmittance below 500 nm (OD 4),80% above 570 nm, and negligible autofluorescence. These spectral characteristics compare favourably with commercially available Schott-glass long-pass filters, indicating that high quality optical filters can be straightforwardly integrated into the form of PDMS microfluidic chips. The filters were found to be robust in use, showing only slight degradation after extended illumination and negligible dye leaching after prolonged exposure to aqueous solutions. The provision of low cost high quality integrated filters represents a key step towards the development of high-sensitivity disposable microfluidic devices for point-of-care diagnostics.