Search

Evaluating the failure probability of a slope under the seismic condition during a given exposure time is important for performance-based assessment of slope stability. In this paper, a two-stage method is suggested to study the seismic stability of a slope during a given exposure time. In the first stage, the exceedance probability of the horizontal pseudo-static acceleration is evaluated. In the second stage, the vulnerability curve of the slope, which shows the relationship between the horizontal pseudo-static acceleration and the failure probability of the slope, is established. The failure probability of the slope during a given exposure time is then assessed by combining the exceedance probability curve of the horizontal pseudo-static acceleration and the vulnerability curve of the slope. Examples investigated show that the reliability of a slope under the seismic condition is controlled by multiple slip surfaces. A slope may have different failure probabilities during the same exposure time when it is at different locations because of different levels of ground shaking. Event at the same site, different slopes may have different failure probability because of the difference in factors like slope geometries and geological conditions. The method suggested in this paper can be used to quantify the effect of the above factors on the reliability of a slope. [ABSTRACT FROM AUTHOR]

An Ms 6.5 earthquake shocked the Ludian County, Yunnan Province, China, on 3 August 2014 and triggered the Hongshiyan landslide dam. The dam, with a height of 83 m and a lake capacity of 260 × 10 m, threatened more than 10,000 people. A unique feature of this landslide dam was that it formed between a man-made dam and a hydropower plant. An existing drainage tunnel connecting the lake and the hydropower plant became a natural drainage conduit for the landslide dam, which played an important role in the mitigation of the landslide dam risks. This paper reports a quantitative risk assessment for the Hongshiyan landslide dam considering both engineering and non-engineering risk mitigation measures. The risk assessment is divided into three stages according to the implementation of two engineering measures: construction of a diversion channel and excavation of a branch drainage tunnel. The dam breaching hydrographs, flood zones, population at risk, and likely fatalities in each of the three stages are analysed. The optimum evacuation strategy in each stage is also studied based on the principle of minimum total consequence. It is found that the diversion channel decreases the dam breaching peak discharge and the associated risks significantly. The branch drainage tunnel prevent the landslide dam from overtopping failure in non-flooded period; however, the landslide dam may fail by overtopping in a future flood if the inflow rate is larger than the outflow rate through the drainage tunnels, resulting in serious losses of lives and properties. The dam breaching risks in all the three stages could be largely reduced by the optimal evacuation decision, which shows that timely evacuation is vital to save life and properties. The study provides a scientific basis for decision making in landslide dam risk management. [ABSTRACT FROM AUTHOR]

In this paper, we examine the influence of the 27 October 2012, Mw 7.8 earthquake on landslide occurrence in the southern half of Haida Gwaii (formerly Queen Charlotte Islands), British Columbia, Canada. Our 1350 km2 study area is undisturbed, primarily forested terrain that has not experienced road building or timber harvesting. Our inventory of landslide polygons is based on optical airborne and spaceborne images acquired between 2007 and 2018, from which we extracted and mapped 446 individual landslides (an average of 33 landslides per 100 km2). The landslide rate in years without major earthquakes averages 19.4 per year, or 1.4/100 km2/year, and the annual average area covered by non-seismically triggered landslides is 35 ha/year. The number of landslides identified in imagery closely following the 2012 earthquake, and probably triggered by it, is 244 or an average of about 18 landslides per 100 km2. These landslides cover a total area of 461 ha. In the following years—2013–2016 and 2016–2018—the number of landslides fell, respectively, to 26 and 13.5 landslides per year. In non-earthquake years, most landslides happen on south-facing slopes, facing the prevailing winds. In contrast, during or immediately after the earthquake, up to 32% of the landslides occurred on north and northwest-facing slopes. Although we could not find imagery from the day after the earthquake, overview reconnaissance flights 10 and 16 days later showed that most of the landslides were recent, suggesting they were co-seismic. [ABSTRACT FROM AUTHOR]

On June 24, 2017, a catastrophic landslide (Xinmo landslide) occurred on the left bank of Songping river in Diexi town, Sichuan Province, China. Based on field investigations, this paper tries to reveal the cause and mechanism of the initiation and development of the Xinmo landslide. Xinmo landslide is located in the so called “Minshan block.” This tectonic block is very active and generates many earthquakes. Among them, the 1933 Diexi Ms 7.5 earthquake which had an indispensable effect on the occurrence of the Xinmo landslide, whose distance to the recent Xinmo landslide is only 8.7 km. The 1933 earthquake triggered the collapse of the Qianxin gully, which damaged the rock mass forming the source of the Xinmo landslide and creating a free prominent ridge. The later 1976 Songpan Ms 7.2 earthquake and the 2008 Wenchuan Ms 8.0 earthquake further damaged the integrity of the rock mass in the source area of the 2017 Xinmo landslide. The Xinmo landslide developed on a typical bedding dip slope with metasandstone intercalated with a few thin bedded slate layers. The slate intercalation gives the slope a very low shear strength in the dip direction and the long term rainfall may have softened the slip zone and the locked section. These two aspects have promoted the occurrence of Xinmo landslide. [ABSTRACT FROM AUTHOR]

This paper presents a methodology for constructing fragility functions to characterise slope stability under a range of catastrophic earthquakes and rainfalls. The procedures for creating fragility functions, including the first-order reliability method (FORM) and the copula-based sampling method (CBSM), are demonstrated using a selection of typical slopes. The most common failure modes are included, such as the shallow sliding of an infinite slope, circular slip surface of a homogeneous slope, and tetrahedral wedge failure in a rock slope. Owing to the proposed approach, the fragility function can be applied to quantify the failure probabilities over a range of loading conditions with ease, as these are attributed to a function, rather than a design point. The advantage of these definitions is that the uncertainties of correlated soil shear strengths can be incorporated into the reliability models. The established procedure can provide a basis for describing vulnerable behaviour of a slope under various loading conditions and geometries. [ABSTRACT FROM AUTHOR]

Earthquakes in mountainous areas may produce many landslides that involve abundant snow, but few observations have been made of these hazardous phenomena. The 12 March 2011 north Nagano Prefecture earthquake (M 6.7) occurred in a mountainous part of Japan that typically has an annual snow cover of more than 2 m, and it induced many snowy landslides. Some of these traveled relatively long distances. We examined the snowy Tatsunokuchi landslide to reconstruct the landsliding processes over deep snow. We infer that the Tatsunokuchi landslide occurred by collapse of a rock debris mass of 5 × 10 m that plunged into the abundant snow, forming a mixture of snow and rock debris, which then traveled on top of the snow. Later, the displaced mass included a large amount of snow which was pushed forward at the front and to the sides. The velocity of the landslide was estimated to be approximately 14 m/s. It appears that the displaced mass, having only a small proportion of rock debris, had a low enough density to travel easily on top of the snow. Our observations suggest that there was much liquid water at the base of the displaced mass shortly after the event. Our results suggest that landslides may damage wider areas than expected if they travel over deep snow. [ABSTRACT FROM AUTHOR]

Particularly in the last decade, landslide susceptibility and hazard maps have been used for urban planning and site selection of infrastructures. Most of the procedures for preparing of landslide susceptibility maps need high-quality landslide inventory map. Although the rainfall and seismic activities are accepted as triggering factor for landslides, designation of the triggering factor for each landslide in the inventory is almost impossible when well-documented records are unavailable. Therefore, during preparation of landslide susceptibility map, whole landslide records in the inventory map are used together without classifying based on the triggering factors. Although seismic activity is accepted as a triggering factor, possible effect of the use of seismic activity on production of landslide susceptibility map was investigated in this study, and the subject is open to discussion. For this purpose, a series of stability analyses based on circular failure and infinite slope model were performed considering different pseudostatic conditions. The results of analyses show that gentle slopes have higher susceptibility to failure than steeper ones, even if their stability conditions (susceptibilities) are similar for static condition. The seismic forces acting on failure surfaces may not be sufficiently taken into consideration in the conventionally prepared landslide susceptibility maps. Employing the general decreasing trend in stability condition based on slope face angle and the seismic acceleration, a new procedure was introduced for preparing of the landslide susceptibility map for a scenario earthquake. The prediction performance of occurring landslides increased after the procedure was applied to the conventionally prepared landslide susceptibility map. According to the threshold independent spatial performance analyses of the proposed methodology and the produced landslide susceptibility maps, the area under ROC curve values were calculated as 0.801, 0.933, and 0.947 for the maps prepared by considering conventional method and scenario earthquakes having M values of 5.5 and 7.5, respectively. [ABSTRACT FROM AUTHOR]

Evaluating behavior of earth dams under dynamic loads is one of the most important problems associated with the initial design of such massive structures. This study focuses on prediction of deformation of earth dams due to earthquake shaking. A total number of 103 real cases of deformation in earth dams due to earthquakes that has occurred over the past years were gathered and analyzed. Using soft computing methods, including feed-forward back-propagation and radial basis function based neural networks, two models were developed to predict slope deformations in earth dams under variant earthquake shaking. Earthquake magnitude (Mw), yield acceleration ratio (ay/amax), and fundamental period ratio (Td/Tp) were considered as the most important factors contributing to the level of deformation in earth dams. Subsequently, a sensitivity analysis was conducted to assess the performance of the proposed model under various conditions. Finally, the accuracy of the developed soft computing model was compared with the conventional relationships and models to estimate seismic deformations of earth dams. The results demonstrate that the developed neural model can provide accurate predictions in comparison to the available practical charts and recommendations. [ABSTRACT FROM AUTHOR]

The Las Colinas landslide, which was triggered by the 13 January 2001, Mw = 7.7 El Salvador earthquake, was highly destructive. The local site is composed of pyroclastic flows, brown cinders, soft pyroclastic fall deposits and a thin palaeosol and is characterised by steep slopes. The extremely high ground motions recorded near the landslide location are assumed to be both produced by site effects and responsible for the landslide. To characterise the ground motion amplifications due to site effects in terms of the variation in geometrical and geological settings, parametric studies were conducted with a linear elastic slope model, which was vertically subjected to the scattering SV wave of the Gabor wavelet. The results show that a maximum amplification is obtained when the model slope angle is approximately 30° (similar to the actual slope angle), and the maximum amplification is located approximately 20 m behind the crest, where the actual movement was initiated. Additionally, a slope with a height of approximately 160 m enhances ground motion amplification. The subsurface geology is found to induce a greater effect on amplification than that of the slope topography. In particular, a soft pyroclastic fall deposit is observed to contribute most of the ground motion amplification. According to the numerical results, it can be concluded that the local site conditions induced extremely high ground motions that then contributed to the slope movement. Although the thin, buried layer of palaeosol did not cause any significant amplification, its weak cohesion enhanced movement. [ABSTRACT FROM AUTHOR]