Search

Due to their practicability, simple and data-driven empirical models have been extensively developed and applied in practical engineering to predict the run-out distance of landslides. However, the definition of the most appropriate empirical model for specific landslide data is rarely discussed. Moreover, the empirical model is subjected to the high variability of landslide data, which should be quantified into the model to provide more reliable predictions. As such, we propose in this paper, a simple, practical, and probabilistic run-out distance prediction method based on an empirical model and Bayesian method. This method was implemented with a regional landslide inventory compiled from 34 loess landslides in Heifangtai Terrace, Gansu Province, China. In this method, we performed a Bayesian model selection to determine the most appropriate empirical model for the compiled database among the possible candidate models adapted from previous literature. Considering the high variability of data, unknown parameters of the empirical model are regarded as random variables, and their posterior distributions are obtained by Bayesian updating with the compiled database. Then, we developed the probabilistic run-out prediction model to evaluate the run-out distance exceedance probability of landslides based on the most appropriate model and its associated posterior random variable information. We utilized data from two recent landslides that occurred in Heifangtai Terrace to validate the performance of the proposed model. In addition, we produced a run-out distance exceedance probability curve using the proposed method for a potential landslide in Heifangtai Terrace, in which the sliding volume interval is estimated using the sloping local base level (SLBL) method. In general, this study presents a practical method for landslide run-out distance analyses within a probabilistic framework, aiming to provide support for risk-based decisions. [ABSTRACT FROM AUTHOR]

As the global climate warms, the frequency of soil slope failures induced by snowmelt is gradually increasing, especially loess landslide disasters in seasonally frozen areas. Landslide disasters in seasonally frozen areas pose a serious threat to human lives and engineering constructions and are gradually drawing greater public attention around the world. However, the mechanism that regulates deformation and failure processes, resulting in snowmelt-driven landslides, remains elusive. The Yili River Valley in Xinjiang, China, is an ideal location for exploring the mechanism of snowmelt-driven landslides. Based on detailed field surveys, remote sensing image identification, meteorological data analysis and loess characteristic tests, this paper takes a representative high-level loess landslide in north-west China as a case in order to explore its evolution history, movement process and resurrection mechanism. It was found that this loess slope had suffered two large-scale sliding failures and different degrees of inherited slope deformation had been found between the two slope failures. The 32 surface cracks identified have a total length of 3,505.10 m, and the total area of the landslide was found to be 135,462m2. The average thickness of the sliding body was about 30 m, and the volume was approximately 504,000 m3. The actual movement time lasted for 32 s with an average moving speed of about 15 m/s. Human grazing activities dominate the formation and development of slope surface cracks in the early stage. The strong water sensitivity of distinctive loess controls soil strength deterioration in the slip zone. Rapid snow removal and infiltration, driven by an abnormal temperature rise in Spring, is the most important triggering factor for slope deformation, evolution and failure. As regional grazing activities increase and global warming intensifies, the potential for resurrection landslides will increase. The results provide essential information for a comprehensive understanding of early warning systems and risk assessment for snowmelt-triggered landslides in cold areas. [ABSTRACT FROM AUTHOR]

Due to the huge losses caused by landslides, landslide deformation monitoring has become essential. The change of the tilting angle of the slope surface can reflect the instability process of the landslide. However, there are few studies on the relationship between the instability process of landslides and the tilting angle of the slope surface on the time scale. Therefore, there are even fewer cases in using the inclination angle of the landslide as an early warning method in practice. On August 24, 2018, a wireless tilt sensor network was deployed in the Heifangtai area of Gansu Province in China, to monitor the inclination state of loess landslides to study the relationship between the tilting angle of the slope surface and the landslide instability process. At 4 o'clock on October 5, 2019, the wireless tilt sensor network mentioned above detected a new loess fall landslide. Through the analysis of the monitoring data from the tilting sensor nodes named T3 and T4, we found that the tilting angle of the landslide surface in the pre-sliding stage has significant change compared with the stable stage, which directly verifies that the inclination data can be used for landslide warning. At the same time, we inputted the monitored inclination data into the inclination warning model proposed by Xie et al. (Landslides 17:301–312, 2020) for verification and found that the trend of inclination changes matches the model well. However, the forecast time error is large. Therefore, this paper optimizes the inclination early warning model proposed by Xie. Using the optimized early warning model, the predicted landslide occurrence time based on the data of the T3 node was 0.517 days, which was about 8 h later than the actual landslide that occurred on October 4, 2019, which is an improvement of forecasting. This case serves as an on-site direct evidence to further verify the feasibility of using the landslide body inclination state as a landslide monitoring and early warning parameter which can be promoted and used in practice. [ABSTRACT FROM AUTHOR]

Landslide disasters are associated with severe losses on the Loess Plateau of China. Although early warning systems and susceptibility mapping have mitigated this issue to some extent, most methods are qualitative or semi-quantitative in the site-specific range. In this paper, a quantitative spatial distribution model is presented for site-specific loess landslide hazard assessment. Coupled with multi-temporal remote sensing images and high-precision UAV cloud point data, a total of 98 loess landslides that have occurred since 2004 on the Heifangtai terrace were collected to establish a landslide volume-date and retreating distance database. Eleven loess landslides are selected to construct a numerical model for parameter back analysis, and the accuracy of the simulation results is quantitatively evaluated by the centroid distance and overlapping area. Different volumes and receding distance rates of landslides are fitted to determine the relationship between cracks and potential volume, and different volumes and parameters are combined to simulate the spatial distribution of potential loess landslides. The results of this study reveal that landslide volumes mainly range between 1 × 103 and 5 × 105 m3, and the historical occurrence probability reaches 0.551. The optimal parameters are estimated by the maximum likelihood method to obtain a uniform distribution parameter value probability model, and the results show that the error of the estimated length within a range of 0.05 from the optimal parameter does not exceed 15%. In the selected slope slide case, farmland near the toe of the slope primarily includes exposed hazards with probabilities greater than 0.7. This work provides a useful reference for local disaster reduction and a theoretical methodology for hazard assessments. [ABSTRACT FROM AUTHOR]

In March 15, 2019, a small-scale loess landslide occurred at Zaoling, Shanxi Province, China, destroying several buildings and killing 20 people. Based on a digital orthophoto map (DOM) and digital elevation model (DEM) derived from Dajiang Pro4 UAV aerial images, coupled with field investigations, this paper describes the geometric features of this slope failure and analyzes its possible inducing factors. Results show that this landslide has a circular chair shape with a sliding direction of 355°. The total projected area of the landslide is 11,800 m2, in which the source is 9880 m2, and the main scarp is 1995 m2. The volume of the source material and loose deposit debris are about 10 × 104 m3 and 12 × 104 m3, respectively. Our research suggests that the inducing factors of this event may include the low strength and structure of the loess under a wet condition, special landforms of the slope, and human activities such as water discharge from a nearby bath center building and coal mining. [ABSTRACT FROM AUTHOR]

Currently, the theory and methodology of digital terrain analysis (DTA) has been well developed. However, this technique has not been widely applied in the research of loess landslides in China. This study investigated the application of DTA on loess landslides with the high-resolution terrain data obtained from low-cost unmanned aerial vehicles (UAVs). Taking a high-speed and long-runout landslide occurring on the Bailu Loess Tableland, a typical landform type on the Loess Plateau, as an example, we illustrated the fundamental characteristics and spatial patterns of the landslide from various perspectives and performed hydrology analysis, geomorphic change detection, hypsometric integral (HI) and stability analysis, morphology analysis, and structure analysis. The results prove that the DTA methodology cannot only advance understanding of the geomorphology and structure of landslides and detect geomorphic change but also reveal the evolution principles of landforms and demonstrate unique advantages in the prediction of the internal stability of landslides. In conclusion, the DTA methods adopted in this paper are useful to better understand loess landslide and its relationship with geomorphologic evolution. [ABSTRACT FROM AUTHOR]