Search

On 14 April 2010 at 07:49 (Beijing time), a catastrophic earthquake with Ms 7.1 struck Yushu County, Qinghai Province, China. A total of 2,036 landslides were interpreted from aerial photographs and satellite images, verified by selected field checking. These landslides cover about a total area of 1.194 km. The characteristics and failure mechanisms of these landslides are presented in this paper. The spatial distribution of the landslides is evidently strongly controlled by the locations of the main co-seismic surface fault ruptures. The landslides commonly occurred close together. Most of the landslides are small; there were only 275 individual landslide (13.5 % of the total number) surface areas larger than 1,000 m. The landslides are of various types. They are mainly shallow, disrupted landslides, but also include rock falls, deep-seated landslides, liquefaction-induced landslides, and compound landslides. Four types of factors are identified as contributing to failure along with the strong ground shaking: natural excavation of the toes of slopes, which mean erosion of the base of the slope, surface water infiltration into slopes, co-seismic fault slipping at landslide sites, and delayed occurrence of landslides due to snow melt or rainfall infiltration at sites where slopes were weakened by the co-seismic ground shaking. To analyze the spatial distribution of the landslides, the landslide area percentage (LAP) and landslide number density (LND) were compared with peak ground acceleration (PGA), distance from co-seismic main surface fault ruptures, elevation, slope gradient, slope aspect, and lithology. The results show landslide occurrence is strongly controlled by proximity to the main surface fault ruptures, with most landslides occurring within 2.5 km of such ruptures. There is no evident correlation between landslide occurrences and PGA. Both LAP and LND have strongly positive correlations with slope gradient, and additionally, sites at elevations between 3,800 and 4,000 m are relatively susceptible to landslide occurrence; as are slopes with northeast, east, and southeast slope aspects. Q al-pl, N, and T kn have more concentrated landslide activity than others. This paper provides a detailed inventory map of landslides triggered by the 2010 Yushu earthquake for future seismic landslide hazard analysis and also provides a study case of characteristics, failure mechanisms, and spatial distribution of landslides triggered by slipping-fault generated earthquake on a plateau. [ABSTRACT FROM AUTHOR]

On June 24, 2017, a catastrophic landslide (Xinmo landslide) occurred on the left bank of Songping river in Diexi town, Sichuan Province, China. Based on field investigations, this paper tries to reveal the cause and mechanism of the initiation and development of the Xinmo landslide. Xinmo landslide is located in the so called “Minshan block.” This tectonic block is very active and generates many earthquakes. Among them, the 1933 Diexi Ms 7.5 earthquake which had an indispensable effect on the occurrence of the Xinmo landslide, whose distance to the recent Xinmo landslide is only 8.7 km. The 1933 earthquake triggered the collapse of the Qianxin gully, which damaged the rock mass forming the source of the Xinmo landslide and creating a free prominent ridge. The later 1976 Songpan Ms 7.2 earthquake and the 2008 Wenchuan Ms 8.0 earthquake further damaged the integrity of the rock mass in the source area of the 2017 Xinmo landslide. The Xinmo landslide developed on a typical bedding dip slope with metasandstone intercalated with a few thin bedded slate layers. The slate intercalation gives the slope a very low shear strength in the dip direction and the long term rainfall may have softened the slip zone and the locked section. These two aspects have promoted the occurrence of Xinmo landslide. [ABSTRACT FROM AUTHOR]