Search

In the last 10 years, also due to climate change, extreme rain events have affected the Basilicata region (southern Italy) causing landslides and floods that have damaged urban fabric, commercial activities and transport infrastructures. In many of these cases, the civil protection system, involving national (DPC) and regional (DRPC) Civil Protection Departments, was activated to manage the emergency phase in cooperation with local administrations and scientific institutions, which in this context are referred to as competence centres (CdCs). Among the latter, the Institute of Methodologies for Environmental Analysis (IMAA) of the Italian National Research Council (CNR) has been frequently involved in carrying out geophysical investigations in landslide areas, especially during the post-event phase. This paper reports the main results of the in-field geophysical surveys carried out in two areas of the Basilicata region affected by significant landslides in the last 10 years. The aim of the surveys was to provide the DRPC technicians with a useful subsoil geophysical model to improve the knowledge of the geological setting of the slope, to reconstruct the geometry of landslide body and to highlight high water content areas, in order to support the decision-making process. At the end of the paper, a discussion follows with the lessons learned from each case study along with recommendations on how to possibly improve the application of geophysical techniques in landslide investigations in order to further increase their impact. [ABSTRACT FROM AUTHOR]

Landslide early warning systems (LEWS) can be categorized into two groups: territorial and local systems. Territorial landslide early warning systems (Te-LEWS) deal with the occurrence of several landslides in wide areas: at municipal/regional/national scale. The aim of such systems is to forecast the increased probability of landslide occurrence in a given warning zone. The performance evaluation of such systems is often overlooked, and a standardized procedure is still missing. This paper describes a new Excel user-friendly tool for the application of the EDuMaP method, originally proposed by (Calvello and Piciullo 2016). A description of indicators used for the performance evaluation of different Te-LEWS is provided, and the most useful ones have been selected and implemented into the tool. The EDuMaP tool has been used for the performance evaluation of the "SMART" warning model operating in Piemonte region, Italy. The analysis highlights the warning zones with the highest performance and the ones that need threshold refinement. A comparison of the performance of the SMART model with other models operating in different Te-LEWS has also been carried out, highlighting critical issues and positive aspects. Lastly, the SMART performance has been evaluated with both the EDuMaP and a standard 2 × 2 contingency table for comparison purposes. The result highlights that the latter approach can lead to an imprecise and not detailed assessment of the warning model, because it cannot differentiate among the levels of warning and the variable number of landslides that may occur in a time interval. [ABSTRACT FROM AUTHOR]

The reconnaissance, mapping and analysis of kinematic features of slow-moving landslides evolving along medium-deep sliding surfaces in urban areas can be a difficult task due to the presence and interactions of/with anthropic structures/infrastructures and human activities that can conceal morphological signs of landslide activity. The paper presents an integrated approach to investigate the boundaries, type of movement, kinematics and interactions (in terms of damage severity distribution) with the built environment of a roto-translational slow-moving landslide affecting the historic centre of Lungro town (Calabria region, southern Italy). For this purpose, ancillary multi-source data (e.g. geological-geomorphological features and geotechnical properties of geomaterials), both conventional inclinometer monitoring and innovative non-invasive remote sensing (i.e. A-DInSAR) displacement data were jointly analyzed and interpreted to derive the A-DInSAR-geotechnical velocity (DGV) map of the landslide. This result was then cross-compared with detailed information available on the visible effects (i.e. crack pattern and width) on the exposed buildings along with possible conditioning factors to displacement evolution (i.e. remedial works, sub-services, etc.). The full integration of multi-source data available at the slope scale, by maximizing each contribution, provided a comprehensive outline of kinematic-geometric landslide features that were used to investigate the damage distribution and to detect, if any, anomalous locations of damage severity and relative possible causes. This knowledge can be used to manage landslide risk in the short term and, in particular, is propaedeutic to set up an advanced coupled geotechnical-structural model to simulate both the landslide displacements and the behavior of interacting buildings and, therefore, to implement appropriate risk mitigation strategies over medium/long period. [ABSTRACT FROM AUTHOR]

This paper shows the results of a study aimed at quantitatively estimating—in terms of direct (repair) costs, at large scale (1:5000)—the slow-moving landslide risk to a road network assumed as undamaged as well as the consequences to the same network in damaged conditions. The newly conceived methodological approaches address some challenging tasks concerning (i) the hazard analysis, which is expressed in terms of probability of occurrence of slow-moving landslides with a given intensity level that, in turn, is established based on empirical fragility curves, and (ii) the consequence analysis, which brings to the generation of time-dependent vulnerability curves. Their applicability is successfully tested in a case study in the Campania region (southern Italy) for which both very high-resolution DInSAR data and information gathered from in situ surveys on the severity of damage sustained by the selected road sections are available. Benefits associated with the use of the obtained results in informed decision-making processes are finally discussed. [ABSTRACT FROM AUTHOR]

Earthquake-induced landslides represent a significant seismic hazard since they can largely increase the damage and losses due to a seismic event, an issue that must be considered in land-use and risk management purposes. However, it can be difficult to consider all the natural variables, such as geotechnical parameters, that predispose the occurrence of landslides under a specific dynamic triggering, especially for wide areas. Among these, the most important and critical ones to quantify at large scale, are represented by the hydraulic conditions in both unsaturated and saturated media. For this reason, in this work we present a newly developed GIS tool that was specifically designed for the automation of a pseudo-dynamic Newmark model to estimate the co-seismic displacements over wide areas. The tool takes into account reactivations of landslides under different rupture mechanisms and parametrically weighs the role of variable initial soil moisture or pressure head conditions, as well as the influence of ground shaking resulting from local amplification effects. The proposed tool was tested in the Molise region (central-southern Italy), where almost 23,000 existing landslides have been selected for evaluating potential reactivations. The obtained results point out the importance of local conditions on the displacement amount, even by considering a unique return period of the seismic action. Strengths and weaknesses of the proposed model have been also highlighted in view of potential future applications in the framework of co-seismic landslide risk assessment and mitigation measures. [ABSTRACT FROM AUTHOR]

Landslides represent a serious worldwide hazard, especially in Italy, where exposure to hydrogeological risk is very high; for this reason, a landslide quantitative risk assessment (QRA) is crucial for risk management and for planning mitigation measures. In this study, we present and describe a novel methodological approach of QRA for slow-moving landslides, aiming at national replicability. This procedure has been applied at the basin scale in the Arno River basin (9100 km2, Central Italy), where most landslides are slow-moving. QRA is based on the application of the equation risk = hazard (H) × vulnerability (V) × exposure (E) and on the use of open data with uniform characteristics at the national scale. The study area was divided into a grid with a 1 km2 cell size, and for each cell, the parameters necessary for the risk assessment were calculated. The obtained results show that the total risk of the study area amounts to approximately 7 billion €. The proposed methodology presents several novelties in the risk assessment for the regional/national scale of the analysis, mainly concerning the identification of the datasets and the development of new methodologies that could be applicable over such large areas. The present work demonstrates the feasibility of the methodology and discusses the obtained results. [ABSTRACT FROM AUTHOR]

Nowadays, several systems to set up landslide inventories exist although they rarely rely on automated or real-time updates. Mass media can provide reliable info about natural hazard events with a relatively high temporal and spatial resolution. The news publication about a natural disaster inside newspaper or crowdsourcing platforms allows a faster observation, survey, and classification of these phenomena. Several techniques have been developed for data mining inside social media for many natural events, but they have been rarely applied to the automatic extraction of "landslide events". This source of information allows continuous feedback from real world, and news concerning landslide events can be rapidly collected. In this work, the newspaper articles about landslides in Italy are automatically collected by an existing data mining algorithm, based on a semantic engine. The news has been analysed to assess their distribution over the territory and to verify the possibility of using them for hazard mapping purpose. In 10 years, from 2010 to 2019, the algorithm identified and geolocated 184322 articles referring to 32525 generical events ("news"). At first, the collected data underwent to a manual verification, followed by a classification based on news relevance, localization accuracy and time of publication. Then, these data have been used to identify the areas and the periods most affected by landslide phenomena. The analyses show that almost 42% of Italian municipalities have been affected by landslide. According to the results, the use of data mining is helpful for the creation of landslide databases where the day and the approximative location (municipality) of the possible landslide triggers are known. This database, in turn, can be used for scientific purposes, as the definition of the meteorological condition associated with landslide initiation, the validation of risk maps. It can also be used for a proper land use or risk mitigation planning, since the most landslide-prone municipalities can be defined. [ABSTRACT FROM AUTHOR]