Search

Landslide dams pose enormous risks to the public because of the potentially catastrophic floods generated by breaching of such dams. The need to better understand the threats of landslide dams raises questions about the proper estimation of breaching parameters (breach size, breaching duration, and peak outflow rate) of landslide dams and the feasibility of applying models for estimating the breaching parameters of man-made earthen dams to landslide dams. This paper aims to answer these two questions. In this study, a database of 1,239 landslide dams, including 257 cases formed during the 12 May 2008 Wenchuan earthquake, has been compiled. Based on records of 52 landslide dam cases with breaching information in the database, empirical models for estimating the breaching parameters of landslide dams are developed. A comparison study between landslide dams and man-made earth and rockfill dams is conducted, which shows that the models for man-made earth and rockfill dams are not suitable for estimating the breaching parameters of landslide dams. Two case studies are presented to show the application of the set of empirical models developed in this paper. [ABSTRACT FROM AUTHOR]

This paper focuses on the evaluation of temporal and spatial propagations of impulse waves using 3D numerical simulation-based models for a potential landslide area in the Tersun Dam reservoir, Northeast Turkey. The topographical model was created using Stereo Lithography files, and a drift-flux model was used to simulate the landslides. The wave generation was simulated using the Reynolds-averaged Navier–Stokes equations. The Drift-Flux approach was selected, and a renormalization group-based k-ε turbulence model was used to create a fluid–solid coupled model. The results show that a 16.5-m impulse wave is created as a result of sliding material hitting the water at a velocity of 16.4 m/s. The wave will reach the opposite shore in 27.4 s, and the run-up height will reach up to 48.8 m. As the wave, with an average velocity of 11.6 m/s in the reservoir, propagates toward the dam body, its height will decrease, and a 3.7-m-high wave will hit the dam in 155 s. A validation analysis performed using empirical equations and laboratory model tests indicates small differences in the results. The main reason for these differences is that the evaluation of wave properties is independent of the type of mass movement in empirical methods. A proper stability analysis is required to have a better estimation of the volume and the velocity of the sliding mass. [ABSTRACT FROM AUTHOR]

A strong earthquake of magnitude 8 in Richter scale, occurred in Sichuan Province, China on 12 May 2008, triggered about 257 landslide dams. The erodibility of fresh landslide deposits plays an important role in evaluating the initiation and development of breaching of such landslide dams. In this research, field jet index tests were conducted shortly after the earthquake at 27 locations on the Hongshihe landslide dam and the Libaisi landslide dam. The purpose of these tests was to investigate the erodibility of freshly deposited landslide soils. The landslide deposits are broadly graded. The bulk density increases and the coefficient of erodibility decreases with the depth of deposition. The erodibility of the fresh landslide deposits falls into a moderately resistant category and the fresh deposits are much more erodible than the native geomaterials before the earthquake. The main factors that control soil erodibility are found to be grain-size distribution, void ratio, fines content, and plasticity index. Particularly, the coefficient of erodibility decreases exponentially with the degree of compaction. Two empirical equations are developed for estimating the coefficient of erodibility and critical erosive shear stress of the freshly deposited landslide soils based on their basic soil properties. [ABSTRACT FROM AUTHOR]