Search

On July 20, 2013, a landslide-induced debris flow occurred in Dujiangyan city, China. Eleven houses were destroyed with more than 166 fatalities. Previous literature indicated that the 2008 Ms 8.0 earthquake and a long period of heavy rain contributed to this landslide. The rock slide was initiated and 21% of the rupture mass fell from the cliff. These rocks fragmented when impacting the ground and then entrained the base soil. Subsequently, the volume of rockfall increased by 28%. In an area of flow convergence, a short-lived blockage occurred, and the following outburst triggered a debris flow. Previous field investigations have shown that both topography and bed entrainment affect the landslide-debris flow transformation. However, the dynamic process has not been quantified. In this study, the discrete element method (DEM) considering the dragging and rolling effects was used to perform a back numerical analysis to capture the dynamic processes. The computational results indicate two different entrainment scenarios, plowing and shearing. The former occurred when the rock slide detached from the cliff, and the latter occurred when debris material moved above the colluvium. The landslide transformed into a debris flow during a short-term blockage that occurred in the gradually narrowing channel. During flow convergence, the inertial shearing stress developed due to the inter-particle collision. [ABSTRACT FROM AUTHOR]

In this study, we carried out a series of physical experiments using a submersed flume model to investigate how sand/clay content influences the depositional mechanism of submarine debris flows. A three-dimensional biphasic numerical model, with a Herschel-Bulkley rheology, was used to back-analyze the physical experiments. The calibrated numerical model was then used in a back-calculation to investigate the effects of viscosity on the deposition process. The results show that as submarine debris flows mix with water during the deposition process, shear stress at the slurry-water interface generates a vortex that leads to a swirl-wedge front head. High-viscosity slurry flows with a swirl-wedge front head travel at a higher aspect ratio and with a greater radius of rotation. Hydroplaning was observed when the front head was lifted by water during flow. The lifting height increased with flow depth fluctuation. Higher viscosity slurry was found to lift more rapidly due to its larger vortex and the decrease in density at the front head over time, both of which promote fluctuation. Although a high-density slurry has a greater lifting height, the ratio of lifting height to front head height is lower, indicating a smaller lifting force influence. Lower density flows have higher kinetic energy as the transfer of potential energy into kinetic energy is more efficient. Kinetic energy dissipation comprises three stages: (1) gravity-dominated coherent flow and hydroplaning lead to a rapid increase in kinetic energy; (2) sharp reduction in kinetic energy as slurry mixes with water, coherence and hydroplaning are reduced, and the influence of the shear stress increases; (3) slurry mixed very well with water, turbidity current dominates the kinetic energy dissipation. High-density slurry dissipates quicker in the last two stages. In stage 3, which dominates the temporal evolution of the debris flow, the Froude number is lower than 1, the flow thins and elongates, and the deposition process of submarine debris flows is dominated by gravity, and the difference of morphology of the different cases become clear. [ABSTRACT FROM AUTHOR]