Search

Rockfalls are a recurrent cause of disruption for transportation corridors running along the bottom of U-shaped alpine valleys. In some scenarios, risk may effectively be reduced only by implementing an early-warning system able to give notice of incipient failures on the slope. This paper describes a successful example of rockfall forecasting and risk management in proximity of the Gallivaggio sanctuary (San Giacomo Valley, Central Italian Alps). Since 2016, a Ground-Based Synthetic Aperture Radar continuously monitored a roughly 500-m high, sub-vertical granitic slope. Monitoring data evidenced the presence and continued movement of a ~ 5000 m3 highly unstable mass, having a projected fall trajectory directly threatening the sanctuary and the adjacent segment of a national road. Traffic and access to the sanctuary were regulated by a sequence of alert thresholds, and restrictive orders were issued according to the activity of the instability. The rock mass eventually fell, and the failure-time was accurately predicted several hours in advance. Despite damage to both the road and buildings, the timely evacuation of the area prevented any loss of life. The case study provides a reference framework to better manage rockfall risk in areas where the installation of adequate protective barriers is not technically feasible. [ABSTRACT FROM AUTHOR]

On 24 October 2015, following a period of heavy rainfall, a landslide occurred in the Calatabiano Municipality (Sicily Island, Southern Italy), causing the rupture of a water pipeline supplying water to the city of Messina. Following this event, approximately 250,000 inhabitants of the city suffered critical water shortages for several days. Consequently, on 6 November 2015, a state of emergency was declared (O.C.D.P. 295/2015) by the National Italian Department of Civil Protection (DPC). During the emergency management phase, a provisional by-pass, consisting of three 350-m long pipes passing through the landslide area, was constructed to restore water to the city. Furthermore, on 11 November 2015, a landslide remote-sensing monitoring system was installed with the following purposes: (i) analyse the landslide geomorphological and kinematic features in order to assess the residual landslide risk and (ii) support the early warning procedures needed to ensure the safety of the personnel involved in the by-pass construction and the landslide stabilization works. The monitoring system was based on the combined use of Ground-Based Interferometric Synthetic Aperture Radar (GB-InSAR) and terrestrial laser scanning (TLS). In this work, the preliminary results of the monitoring activities and a remote 3D map of the landslide area are presented. [ABSTRACT FROM AUTHOR]