Search

Two-dimensional materials (2DMs) have been used widely in constructing photodetectors (PDs) because of their advantages in flexible integration and ultrabroad operation wavelength range. Specifically, 2DM PDs on silicon have attracted much attention because silicon microelectronics and silicon photonics have been developed successfully for many applications. 2DM PDs meet the imperious demand of silicon photonics on low-cost, high-performance, and broadband photodetection. In this work, a review is given for the recent progresses of Si/2DM PDs working in the wavelength band from near-infrared to mid-infrared, which are attractive for many applications. The operation mechanisms and the device configurations are summarized in the first part. The waveguide-integrated PDs and the surface-illuminated PDs are then reviewed in details, respectively. The discussion and outlook for 2DM PDs on silicon are finally given.

Strain modulation is crucial for heteroepitaxy such as GaN on foreign substrates. Here, the epitaxy of strain-relaxed GaN films on graphene/SiC substrates by metal-organic chemical vapor deposition is demonstrated. Graphene was directly prepared on SiC substrates by thermal decomposition. Its pre-treatment with nitrogen-plasma can introduce C–N dangling bonds, which provides nucleation sites for subsequent epitaxial growth. The scanning transmission electron microscopy measurements confirm that part of graphene surface was etched by nitrogen-plasma. We study the growth behavior on different areas of graphene surface after pre-treatment, and propose a growth model to explain the epitaxial growth mechanism of GaN films on graphene. Significantly, graphene is found to be effective to reduce the biaxial stress in GaN films and the strain relaxation improves indium-atom incorporation in InGaN/GaN multiple quantum wells (MQWs) active region, which results in the obvious red-shift of light-emitting wavelength of InGaN/GaN MQWs. This work opens up a new way for the fabrication of GaN-based long wavelength light-emitting diodes.

A crystal structure has a profound influence on the physical properties of the corresponding material. By synthesizing crystals with particular symmetries, one can strongly tune their properties, even for the same chemical configuration (compare graphite and diamond, for instance). Even more interesting opportunities arise when the structural phases of crystals can be changed dynamically through external stimulations. Such abilities, though rare, lead to a number of exciting phenomena, such as phase-change memory effects. In the case of trilayer graphene, there are two common stacking configurations (ABA and ABC) that have distinct electronic band structures and exhibit very different behaviors. Domain walls exist in the trilayer graphene with both stacking orders, showing fascinating new physics such as the quantum valley Hall effect. Extensive efforts have been dedicated to the phase engineering of trilayer graphene. However, the manipulation of domain walls to achieve precise control of local structures and properties remains a considerable challenge. Here, we experimentally demonstrate that we can switch from one structural phase to another by laser irradiation, creating domains of different shapes in trilayer graphene. The ability to control the position and orientation of the domain walls leads to fine control of the local structural phases and properties of graphene, offering a simple but effective approach to create artificial two-dimensional materials with designed atomic structures and electronic and optical properties., Laser on trilayer graphene: stack switch with a difference Heat from a laser changes how atoms stack up within trilayer graphene, providing a simple and effective approach for fabricating new materials with interesting optical and electronic properties. Mengjian Zhu of China’s National University of Defense Technology and colleagues used laser light to switch regions within trilayer graphene from one type of atomic layering to another. This is interesting, as the properties of trilayer graphene vary depending on how its atoms are stacked up. Zhu and his colleagues found that heat from the laser manipulated the dividing walls separating differently stacked atomic regions within the graphene flakes. This led to a gradual switch from one type of atomic stacking to another, changing the graphene’s properties. The finding could lead to applications for optical storage media and photonic devices.

Owing to the tremendous demands for high-resolution pixel-scale thin lenses in displays, we developed a graphene-based ultrathin square subpixel lens (USSL) capable of electrically tuneable focusing (ETF) with a performance competitive with that of a typical mechanical refractive lens. The fringe field due to a voltage bias in the graphene proves that our ETF-USSL can focus light onto a single point regardless of the wavelength of the visible light—by controlling the carriers at the Dirac point using radially patterned graphene layers, the focal length of the planar structure can be adjusted without changing the curvature or position of the lens. A high focusing efficiency of over 60% at a visible wavelength of 405 nm was achieved with a lens thickness of, Graphene: ultrathin tuneable lens Graphene-based ultrathin lenses with an electrically tuneable focal length could prove useful for providing displays with autostereoscopic 3D functionality, multiview or privacy protection. Developed by scientists in South Korea, the UK and the US, the lenses are just 13 nm thick and are based on a Fresnel Zone Plate (FZP) design made from a series of concentric rings of graphene on a glass substrate. Consisting of up to 5 layers of graphene that is patterned by focused ion-beam milling, the lenses offer a 60% transmission in the visible region and a focal length of 200–300 µm that can be tuned within ~20% range by applying a DC bias voltage. The applied voltage changes the charge carrier density in the graphene, modifying the topology of the FZP and thus its focusing behaviour.

Graphene has attracted much attention for the realization of high-speed photodetection for silicon photonics over a wide wavelength range. However, the reported fast graphene photodetectors mainly operate in the 1.55 μm wavelength band. In this work, we propose and realize high-performance waveguide photodetectors based on bolometric/photoconductive effects by introducing an ultrathin wide silicon−graphene hybrid plasmonic waveguide, which enables efficient light absorption in graphene at 1.55 μm and beyond. When operating at 2 μm, the present photodetector has a responsivity of ~70 mA/W and a setup-limited 3 dB bandwidth of >20 GHz. When operating at 1.55 μm, the present photodetector also works very well with a broad 3 dB bandwidth of >40 GHz (setup-limited) and a high responsivity of ~0.4 A/W even with a low bias voltage of −0.3 V. This work paves the way for achieving high-responsivity and high-speed silicon–graphene waveguide photodetection in the near/mid-infrared ranges, which has applications in optical communications, nonlinear photonics, and on-chip sensing., 2 µm photodetectors: silicon−graphene−metal hybrid plasmonics The use of a silicon−graphene plasmonic waveguide has enabled the realization of fast and sensitive photodetectors that operate at the wavelength of 2 µm. In order to satisfy the demands for the applications in optical communication and optical sensing, there is the need to extend silicon photonics to wavelengths beyond 1.55 µm. However, it is a challenge to create high-performance photodetectors at these wavelengths. Now, Daoxin Dai and coworkers from Zhejiang University and Southeast University in China have proposed and realized a silicon−graphene hybrid plasmonic waveguide photodetector that operates at 2 µm with a responsivity of ~70 mA/W and a 3-dB bandwidth over 20 GHz. In this design, efficient light absorption in graphene is enabled by using a hybrid plasmonic waveguide with a wide thin silicon ridge core and a metal cap that serves as a signal electrode.

Photonic sensors that are able to detect and track biochemical molecules offer powerful tools for information acquisition in applications ranging from environmental analysis to medical diagnosis. The ultimate aim of biochemical sensing is to achieve both quantitative sensitivity and selectivity. As atomically thick films with remarkable optoelectronic tunability, graphene and its derived materials have shown unique potential as a chemically tunable platform for sensing, thus enabling significant performance enhancement, versatile functionalization and flexible device integration. Here, we demonstrate a partially reduced graphene oxide (prGO) inner-coated and fiber-calibrated Fabry-Perot dye resonator for biochemical detection. Versatile functionalization in the prGO film enables the intracavity fluorescent resonance energy transfer (FRET) to be chemically selective in the visible band. Moreover, by measuring the intermode interference via noise canceled beat notes and locked-in heterodyne detection with Hz-level precision, we achieved individual molecule sensitivity for dopamine, nicotine and single-strand DNA detection. This work combines atomic-layer nanoscience and high-resolution optoelectronics, providing a way toward high-performance biochemical sensors and systems.

By coupling dye molecules with a graphene layer and localizing the molecules through quantification of fluorescence lifetime quenching, a novel imaging system offers unprecedented 1-nm resolution with angstrom precision in the axial dimension.