Search

Highly accurate high-throughput experimentation (HTE) data for a set of 21 silicon-bridged C2-symmetric ansa-zirconocenes in propene homopolymerization were collected and were used to develop quant...

The mechanical behavior of propylene−pentene isotactic copolymers synthesized with a single-center organometallic catalyst in a broad interval of pentene (Pe) concentration, from 3 to 50 mol %, is analyzed. All copolymers show flexible behavior with very high deformation at breaking. The presence and entrance of Pe counits in α and δ forms of isotactic polypropylene (iPP) transform a strong and fragile iPP homopolymer into ductile and flexible materials. The stress at yield decreases as the Pe content increases, but a different behavior has been observed for samples in the α form or in the δ form. In samples in the α form, from 3 to 8.8 mol % of Pe, the stress at yield increases as the thickness of crystalline lamellae increases, while in samples in the δ form containing higher Pe counits, it decreases as the thickness of lamellae increases and Pe content increases. Phase transition of the α form in the mesophase and crystallization of the δ form, in samples with 8−11 mol % of Pe, occur upon deformation and are correlated to the strain-hardening observed at high strain.

The development of a highly oriented fiber morphology by stretching low stereoregular isotactic polypropylene (iPP) samples is studied at two different temperatures. The structural and morphological transformations occurring during deformation are followed in real time by collecting in situ wide (WAXS) and small-angle (SAXS) X-ray scattering data. WAXS analysis reveals that the disordered γ form initially present in the samples gradually transforms by stretching into the oriented mesomorphic form of iPP at room temperature and in well-oriented crystals of α form at 60 °C. SAXS analysis indicates that regardless of the stretching temperature, a cascade of events occurs at mesoscale during deformation, consisting in interlamellar separation and lamellar reorientation at low deformations, followed by formation of chevron-like textures, lamellar fragmentation, and cavitation. Moreover, different fibrillary morphologies develop at the different temperatures. In fact, the fibrillary morphology that develops at room temperature is characterized by rod-like fibrillary entities containing mesomorphic aggregates separated by amorphous regions, placed at uncorrelated longitudinal and lateral distances. Instead, the morphology that develops at 60 °C consists of a fibrillary network for the more stereoregular sample and of rod-like fibrillary entities for the less stereoregular sample, and both morphologies include well-oriented crystals of α form alternating with amorphous regions which are periodically stacked along the stretching direction and are placed at uncorrelated lateral distance. We argue that the difference in structural arrangement of amorphous and crystalline regions at mesoscale in the stretched samples are mainly due to the increase of the mobility of the chains in the amorphous matrix at higher temperature, which facilitates the relaxation of the amorphous phase and the changes in the relative arrangement of the crystalline domains.

The synthesis and the crystal structure of isotactic poly((R,S)-3-methyl-1-pentene) (iP(R,S)3MP) are presented. The synthetic strategy based on hydrogenation of isotactic 1,2-poly(E-3-methyl-1,3-pentadiene) has allowed for the preparation of a purely random copolymer of the two enantiomeric (R)-and (S)-3-methyl-1-pentene monomers. X-ray diffraction analysis and conformational and packing energy calculations have shown that chains of iP(R,S)3MP are in 4/1 helical conformation and are packed in a monoclinic unit cell with parameters a = 10.02 Å, b = 18.48 Å, c = 6.87 Å, and γ = 109.9° according to the space group P2 1 /b or P2 1. A high degree of disorder is present in the crystals due to the random enchainment of the enantiomeric R and S monomeric units, whose chirality influences the handedness of the helical chains and the conformation assumed by the lateral groups. Disorder in the conformation of the lateral groups is also present. The crystal structure of the random copolymer iP(R,S)3MP is different from the tetragonal structure of the pure enantiomer homopolymer iP(S)3MP. This is due to different entropic effects, related to the presence of different types of disorder included in the crystals that drive crystallization in different packing modes. The crystal structure of iP(R,S)3MP provides an example of the effect of the chirality of side groups on the crystal packing and is an example of symmetry breaking in the structures of polymers.

A study of the mechanical properties and of the crystallization behaviour of samples of isotactic polybutene (iPB) of different stereoregularity prepared with metallocene catalysts, is presented. Stereoregular samples with concentration of rr defetcs lower than 2 mol% crystallize from the melt by compression-molding and fast cooling to room temperature in form II, whereas more stereoirregular samples crystallize surprisingly mainly in form III. The stereodefective iPB samples show interesting mechanical properties of high ductility and flexibility that increase with increasing concentration of rr stereodefects, with values of deformation at break higher than 1000% for the most stereoirregular sample containing about 5 mol% of stereodefects. The aging at room temperature produces transformation of form II into form I in more stereoregular samples, whereas no phase transformation occurs in more stereoirregular samples crystallized mainly in form III. A strong increase of Young’s modulus and of stress at yield is observed after transformation of form II into form I. For more stereoirregular samples with concentration of rr defects higher than 2 mol% crystallized in form III, the mechanical properties do not change significantly upon aging at room temperature because no phase transformations occur during aging. Also for the aged samples a remarkable increase of ductility and flexibility with increasing concentration of rr stereodefects is observed. The mechanical deformation is associated with stress induced transformations of form II and form III into form I. These results indicate that mechanical properties of iPB can be modified by the controlled incorporation of stereodefects and improvement of ductility is easily obtained while maintaining high crystallinity by inclusion of small amounts of rr stereodefects.

A set of syndiotactic polypropylene samples with tailored degree of stereoregularity and uniform distribution of stereodefects, obtained via organometallic catalysis, was used to study the relation between the syndiotactic pentad concentration and the viscoelastic plateau modulus in the melt state. The plateau modulus was found to increase with increasing the degree of stereoregularity, indicating that syndiotactic polypropylenes of different stereoregularity produce a different entanglement density of the amorphous phase. The change in plateau modulus was highly nonlinear for large values of syndiotactic pentad contents, suggesting that the presence of even a relatively small number of defects along the syndiotactic backbone significantly alters the space filling attitude of the polymer chain in the melt. This result, which confirms and extends those already obtained from experiments and numerical simulations, points out to the concept that the dynamics of macromolecular chains is largely controlled by the relative configuration of consecutive stereoisomeric centers along the chain, thus providing a link between chain dynamics and molecular architecture

A study of the morphology and the mechanical properties of the mesomorphic form of isotactic polypropylene (iPP) that crystallizes in samples of different stereoregularity prepared with metallocene catalysts is reported. Highly isotactic samples slowly crystallized from the melt in the α form show the typical lamellar morphology with organization in spherulites. Bundle-like elongated crystalline entities and needle-like crystals of γ form are instead observed for stereoirregular samples slowly crystallized from the melt in the γ form. All samples crystallize by fast quenching the melt at 0 °C in the mesomorphic form, regardless of stereoregularity. Crystals of the mesomorphic form always exhibit a nodular morphology and absence of lamellar spherulitic superstructures, independent of the stereoregularity. This morphology accounts for the similar good deformability of all the quenched samples, whatever the concentration of stereodefects. For all samples and any stereoregularity, the nodular morphology with absence of spherulites is preserved after annealing and transformation of the mesophase into α form. The formation of a nodular α form accounts for outstanding properties of high ductility and mechanical strength of the annealed samples crystallized in the α form. The most stereoirregular sample with rr concentration of 11% shows elastic behavior either when it is slowly crystallized in the γ form or when it is crystallized in the mesomorphic form and also after annealing and transformation of the mesophase into the nodular α form.