Search

Diagenesis plays a crucial role in shale oil reservoir formation. However, complex organic-inorganic interactions result in pore system formation and heterogeneity changes at the centimeter, or even micrometer scale, which controls the evolution of shale oil reservoirs. In this paper, an integrated approach including core observation, thin section observation, cathodoluminescence thin section observation, scanning electron microscope, μ-XRF analysis, electron microprobe analysis, AMICS analysis, LA-ICP-MS analysis, and isotope analysis was used to clarify the laminae combination carbonate-rich shale, diagenetic alterations in different types of shale laminae and the controls on shale oil reservoir formation. According to the lamina combination, the carbonate-rich shale in the Permian Lucaogou Formation can be divided into three types. They are shale consists of dolomitic lamina and terrigenous felsic lamina (Type A shale), shale consists of calcite-rich tufaceous lamina and terrigenous felsic lamina (Type B shale) and shale consists of calcareous lamina and tufaceous lamina (Type C shale). Dolomite cementation is the major diagenesis in terrigenous felsic lamina of Type A shale. The dolomite can be identified as the early stage forming from recrystallization of micrite dolomite, and the late stage precipitate from adjacent dolomitic lamina. In the terrigenous felsic lamina of Type B shale, however, the calcite cementation is the dominated diagenesis, which was sourced from adjacent calcite-rich tufaceous lamina. Also, some feldspar dissolutions occurred in terrigenous felsic lamina during organic matter evolution. For the Type C shale, the main diagenetic alteration is micrite calcite recrystallization in calcareous lamina. The dissolution and precipitation of carbonate minerals between different laminae of carbonate-rich shale reveal that the organic matter evolution significantly influence the diagenetic alterations of inorganic minerals. Particularly, the diagenetic mass transfer and redistribution at the micro-scale in a relatively diagenetic system were confirmed by organic-inorganic interactions in laminated shale. In this process, dissolution pores and recrystallization pores have provided considerable reservoir pores for shale oil. • The laminae combination and diagenetic alterations of carbonate-rich shale were identified. • The diagenetic mass transfer at the micro-scale during organic-inorganic interactions in laminated shale were clarified. • The pores induced by diagenetic mass transfer within a closed system is crucial for shale reservoir formation. [ABSTRACT FROM AUTHOR]

Abstract Mixed deposits are sediments consisting of external clastic (epiclastic or terrigenous), intrabasinal components and pyroclastic components. The mixture, comprising variable amounts of the three components, is defined as "mixed sedimentary rocks". The Permian Lucaogou Formation (P 2 l) in the Jimusar Sag of the Junggar Basin is a promising tight oil target in western China, the fine-grained mixed sedimentary rocks of which are rich in organic matter (OM) and two sweet spot intervals with relatively high porosity. However, the sediment composition, provenance and deposition environmental settings have not been studied in detail. In this study coupled chemostratigraphic-petrographic analysis were used to reconstruct their depositional environments. The results show that the fine-grained sedimentary rocks have three major sediment sources, external clastic input (terrigenous clastics), intrabasinal autochthonous to parautochthonous components (carbonates, siliceous skeletal debris and OM) and pyroclastic input. Main lithofacies include siltstone/fine sandstone, mudstone, dolomite and tuffite. The silt/sandstones were mainly sourced from rocks with calc-alkaline composition, while the tuffaceous sedimentary rocks were sourced from high-K calc-alkaline rocks. Elemental proxies suggest that the carbonate rocks were generally deposited under warm and arid conditions, whereas the fine-grained clastic sediments were deposited under relatively humid conditions. The muddy or silty tuffaceous mixed rocks were deposited under relatively reducing conditions compared with carbonates and sandstones. Variations of lithofacies and OM accumulation of different intervals reflect changing deposition environmental settings, and the frequently altered high TOC content rocks and good reservoirs are benefit for tight oil formation. The work may provide some useful insights and serve as a reference for studying other mixed fine-grained sedimentary rocks and tight oil plays in similar lacustrine basins elsewhere. Highlights • Lacustrine mixed fine-grained sedimentary rocks have three sources: extrabasinal, intrabasinal and pyroclastic component. • Coupled chemostratigraphic-petrographic analyses for depositional conditions of the mixed fine-grained sedimentary rocks. • The effect of sedimentary environments on lithofacies and OM accumulation variation. • High TOC content and high porosity reservoir interbedded layers are benefit for the development of tight oil. [ABSTRACT FROM AUTHOR]

Abstract In order to better predict the petrophysical properties of the tight sandstone reservoirs in the Upper Triassic Yanchang Formation, Ordos Basin, China, the nature of the diagenetic system involved was investigated using a suite of petrographic and geochemical techniques including thin section and X-Ray Diffraction analysis, scanning electron microscopy, MAPS mineralogy, Cathodeluminescence, electron probe microanalysis and fluid inclusion analysis on a set of selected tight sandstone samples. The sandstones investigated are texturally mature but compositionally immature with an average framework grain composition of Q 32 F 41 L 27. Authigenic quartz, calcite, and chlorite coatings are the major cements, while feldspars are partially dissolved. Two groups of quartz cement are present in the tight sandstone reservoirs. Smectite to illite conversion provided silica source for the first group of quartz overgrowth (Qo-I), while the silica source for the second quartz overgrowth (Qo-II) was mainly originated from feldspar dissolution. Calcite cements consist of two types, namely Ca-I and Ca-II. The Ca-I calcite cement contains no chlorite coatings and have higher concentrations of Fe2+ and Mg2+, whereas the Ca-II calcite cement developed over the chlorite coatings. Plagioclase dissolution appears to be always accompanied by calcite cementation, while K-feldspar albitization forms euhedral albite locally. The burial diagenesis processes were, in most cases, not episodic but occurred as slow adjustments in response to increased burial depths and temperatures. In all the studied diagenetic minerals, elemental distributions appear to be strictly constrained by the interaction of authigenic minerals involved, indicating that the chemical reactions during the diagenesis comply well with the general principle of mass balance. The diagenesis in the Upper Triassic Yanchang Formation tight sandstones was thus mainly developed in a closed geochemical system, where mineral dissolution and precipitation are approximately balanced, and diagenetic fluids were not affected by external sources significantly. Mechanical compaction has played a more important role in destroying the primary porosities of the Upper Triassic Yanchang Formation than the cementation. Highlights • There are two groups of quartz cement in the tight sandstone reservoirs. • Two types of calcite cement are present in the tight sandstone reservoirs. • Diagenesis of the tight sandstone reservoirs occurred in a closed geochemical system. [ABSTRACT FROM AUTHOR]

Understanding diagenetic fluid types and their effects on diagenesis is important to identify the main control factors of reservoir characteristics and predict reservoir sweet spots. Reservoir space destruction caused by strong cementation is notable in the Lower Jurassic Ahe Formation sandstones near the deep-rooted fault (Yiqikelike Fault) in the Kuqa depression. Different authigenic minerals and widely varying cementation contents indicate the complexity of diagenetic fluids. Therefore, we investigated strong cementation using petrographic and geochemical methods, including cathodoluminescence, scanning electron microscopy, laser ablation inductively coupled plasma mass spectrometry, and stable isotope analysis. The contents of authigenic quartz and calcite increased as they approached the deep-rooted fault, with maximum concentration of quartz and calcite of up to 8.73% and 8.92%, respectively. Abnormally high homogenization temperatures of the fluid inclusions were observed in the quartz overgrowth, one of which reached 156 °C. In calcite, the rare earth element Eu exhibited abnormal characteristics, and the carbon isotopes ranged from −8.00‰ to −2.00‰. Therefore, it is likely that deep fluids are involved in reservoir diagenesis near a deep-rooted fault. This study provides a good example of diagenetic evolution in deep sandstone reservoirs and the negative effects of the involvement of deep fluids in diagenetic processes. • The deep fluids were involved in cementation of diagenesis in Jurassic Ahe Formation sandstones near the deep-rooted fault. • The deep fluids provided material source for authigenic quartz and calcite. • The deep fluid is one reason for the difference in diagenesis between the areas near and far from the deep-rooted fault. [ABSTRACT FROM AUTHOR]

Pore-throat size is a very crucial factor controlling the reservoir quality and oiliness of tight sandstones, which primarily affects rock-properties such as permeability and drainage capillary pressure. However, the wide range of size makes it difficult to understand their distribution characteristics as well as the specific controls on reservoir quality and oiliness. In order to better understand about pore-throat size distribution, petrographic, scanning electron microscopy (SEM), pressure-controlled mercury injection (PMI), rate-controlled mercury injection (RMI), quantitative grain fluorescence (QGF) and environmental scanning electron microscopy (ESEM) investigations under laboratory pressure conditions were performed on a suite of tight reservoir from the fourth member of the Lower Cretaceous Quantou Formation (K 1 q 4 ) in the southern Songliao Basin, China. The sandstones in this study showed different types of pore structures: intergranular pores, dissolution pores, pores within clay aggregates and even some pores related to micro fractures. The pore-throat sizes vary from nano- to micro-scale. The PMI technique views the pore-throat size ranging from 0.001 μm to 63 μm and revealed that the pore-throats with radius larger than 1.0 μm are rare and the pore-throat size distribution curves show evident fluctuations. RMI measurements indicated that the pore size distribution characteristics of the samples with different porosity and permeability values look similar. The throat size and pore throat radius ratio distribution curves had however significant differences. The overall pore-throat size distribution of the K 1 q 4 tight sandstones was obtained with the combination of the PMI and RMI methods. The permeability is mainly contributed by a small part of larger pore-throats (less than 30%) and the ratio of the smaller pore-throats in the samples increases with decreasing permeability. Although smaller pore-throats have negligible contribution on reservoir flow potential, they are very significant for the reservoir storage capacity. The pore-throats with average radius larger than 1.0 μm mainly exist in reservoirs with permeability higher than 0.1mD. When the permeability is lower than 0.1mD, the sandstones are mainly dominated by pore-throats with average radius from 0.1 μm to 1.0 μm. The ratio of different sized pore-throats controls the permeability of the tight sandstone reservoirs in different ways. We suggest that splitting or organizing key parameters defining permeability systematically into different classes or functions can enhance the ability of formulating predictive models about permeability in tight sandstone reservoirs. The PMI combined with QGF analyses indicate that oil emplacement mainly occurred in the pore-throats with radius larger than about 0.25–0.3 μm. This result is supported by the remnant oil micro-occurrence evidence observed by SEM and ESEM. [ABSTRACT FROM AUTHOR]

The tight sandstones of the Cretaceous Quantou formation are the main exploration target for hydrocarbons in the southern Songliao basin. Authigenic quartz is a significant cementing material in these sandstones, significantly reducing porosity and permeability. For efficient predicting and extrapolating the petrophysical properties within these tight sandstones, the quartz cement and its origin need to be better understood. The tight sandstones have been examined by a variety of methods. The sandstones are mostly lithic arkoses and feldspathic litharenites, compositionally immature with an average framework composition of Q 43 F 26 L 31 , which are characterized by abundant volcanic rock fragments. Mixed-layer illite/smectite (I/S) ordered interstratified with R = 1 and R = 3 is the dominating clay mineral in the studied sandstone reservoirs. Two different types of quartz cementation modes, namely quartz grain overgrowth and pore-filling authigenic quartz, have been identified through petrographic observations, CL and SEM analysis. Homogenization temperatures of the aqueous fluid inclusions indicate that both quartz overgrowths and pore-filling authigenic quartz formed with a continuous process from about 70 °C to 130 °C. Sources for quartz cement produced are the conversion of volcanic fragments, smectite to illite reaction and pressure solution at micro stylolites. Potassium for the illitization of smectite has been sourced from K-feldspar dissolution and albitization. Silica sourced from K-feldspars dissolution and kaolinite to illite conversion is probably only minor amount and volumetrically insignificant. The internal supplied silica precipitate within a closed system where the transport mechanism is diffusion. The quartz cementation can destroy both porosity and permeability, but strengthen the rock framework and increase the rock brittleness effectively at the same time. [ABSTRACT FROM AUTHOR]

The Kuqa Foreland Basin, adjacent to the southern Tianshan Mountains, is an important gas-producing basin in northwestern China. The development of the basin is dominated by a regional stress field with orientations of the maximum horizontal stress (S Hmax) in the north-south direction, as a result of the collision between the Indian and Eurasian Plates. Previous studies have noted variations in the stress state in the Kuqa Foreland Basin; however, little attention has been paid to understanding the mechanisms causing such variations. In this study, a systematic analysis of in-situ S Hmax orientations and fractures has been carried out using image logs from eight wells and XMAC/DSI logs from five wells. These wells are located in an East-West (E-W) trending fold-thrust in the foreland basin. The S Hmax orientations (having quality ranked between A and D) obtained from borehole breakouts and drilling-induced fractures are highly variable and occur as two evidently different stress patterns on a scale of less than 10 km. The first stress pattern with S Hmax orientations between NNW and NNE (165.08 and 188.59 °N) is broadly comparable to the regional stress field inferred from earthquake focal mechanism solutions in northwestern China from the World Stress Map (WSM). The stress pattern is interpreted to be controlled by plate boundary forces related to the collision between the Indian and Eurasian Plates. The S Hmax orientations for the second stress pattern, however, ranging from NNE to ENE (26.65–57.77 °N), are clearly inconsistent with the regional stress filed and have been influenced by local geological factors. Faults and hinge-parallel fractures (trending in an approximately W-E direction) formed during the syn-folding stage probably resulted in heterogeneity of elastic properties and thus deflected S Hmax orientations, both laterally and vertically, to generate the second stress pattern. The NE-striking hinge-oblique fractures are interpreted to have formed in response to the stress reorientation. Observations in this study suggest that there may exist a close relationship between fracturing (faulting) and stress variations, and pre-existing faults and fractures can influence subsequent fracturing by regulating local stress fields on a scale of several kilometers. The coupling between fracturing or faulting and stress produced fracture swarms, which can significantly enhance fluid flow and hence petroleum production. • S Hmax orientation is regionally controlled by Eurasian-Indian Plate collision. • Fault and fracture are primarily responsible for local stress reorientation. • Pre-existing fractures affect subsequent fracturing by altering local stress field. • Stress orientation couples with fracturing to produce fracture swarms. [ABSTRACT FROM AUTHOR]

Abstract This research is focused on the characteristics and origin of major authigenic minerals and the influences on the reservoir quality of the Permian Wutonggou Formation sandstones in the eastern slope of Fukang Sag, Junggar Basin, Western China. Authigenic cements were observed and described from thin sections, scanning electron microscopy, fluorescence, and cathodoluminescence. The elemental concentrations of the authigenic minerals were measured by electron probe microanalysis. Additional characterizations were obtained from O and C stable isotope ratios and from the homogenization temperature of aqueous fluid inclusions. The results show that the sandstones in the Wutonggou Formation are dominated by volcanic lithic fragments. Carbonates and laumontites are the major authigenic minerals in the study area. Authigenic quartz and kaolinite can also be observed. Two types of carbonate cements are identified. The first type is calcite with yellow fluorescent hydrocarbon inclusions. The carbon and oxygen isotopes in the calcites are highly C-depleted and O-depleted. The homogenization temperatures of the aqueous fluid inclusions in the calcite cements are higher than the highest paleogeotemperatures during the burial history. Combined with the presence of authigenic fibrous illites and the illitization of kaolinites, it is determined that the precipitation of the calcites is related to the upwelling of deep fluids and was impacted by the CO 2 from the thermal decarboxylation of organic matters during the middle-late Jurassic. The second type is ferroan calcite with blue fluorescent hydrocarbon inclusions and higher contents of Fe, Mn, Cr, and Mg than in the calcites. The ferroan calcites in the Beisantai uplift are rich in 13C (δ13C (V-PDB) values are +22.10‰ and +22.16‰). The precipitation of these ferroan calcites was impacted by the CO 2 from crude oil biodegradation after the late Jurassic. Two types of laumontites are identified. The first type is partially dissolved and is characterized by a high Ca/Na ratio and low Fe contents. The second type is hardly dissolved, has hydrocarbon inclusions with yellow and blue fluorescence, and is characterized by a low Ca/Na ratio and high Fe contents. The first type of laumontite was precipitated prior to hydrocarbon charging and the second type was formed after hydrocarbon charging and meteoric water leaching. The hydration of the volcanic debris provided the source materials for both types of laumontite. The authigenic quartz and kaolinite were formed by the alteration of feldspars, laumontites, and volcanic materials. The evolution of the reservoir properties was impacted by various degrees of cementation and dissolution; as a result, the reservoir quality in the Beisantai uplift was better than in the Shaqiu area. Highlights • Origin and formation time of calcite cements is determined under the context of multi-stage tectonic subsidence and uplift. • The precipitation of the ferrocalcites in Beisantai uplift was impacted by biodegradation of crude oil, which was firstly found in this area. • Multistage laumontite are precipitated in the study area. • The diagenetic paragenetic sequence and evolution of the reservoir properties are established in study area which experienced a multi-stage uplift and subsidence process. [ABSTRACT FROM AUTHOR]

Abstract Subaqueous sediment gravity-flow (SSGF) deposits have recently been recognized as a major reservoir plays in lacustrine basins. Research on their genesis and depositional models are crucial to understand gravity flow evolution and the distribution of their deposits. This study analysed SSGF deposits in the third member of the Shahejie Formation in the Jiyang Depression, Eastern China, based on 3-D seismic data, well-log data, and core observations. The types and origins of SSGF, the distribution patterns and depositional models of SSGF deposits have been investigated. The dominant types of SSGF include: muddy debris flows, sandy debris flows, high density turbidity currents, surge-like low density turbidity currents, and quasi-steady low density turbidity currents, which are mainly caused by river floods and sediment failures. The overall distribution of SSGF deposits is controlled by the sediment supplies, basin structure, and sequence stratigraphic framework. Paleotopography, flood energy, triggering mechanism, and the slope angle of the delta front are also important. SSGF deposits associated with river floods can be further subdivided into elongated and fan-shaped deposits. Elongated sandstones are composed predominantly of bedload-dominated and suspension load-dominated hyperpycnal flow deposits. The fan-shaped sandstones can be subdivided into an inner fan, a middle fan, and an outer fan. Inner fan deposits are dominated by gully-filling debrites. Middle fan deposits are composed predominantly of channel-fill deposits, while outer fan deposits consist of thin bedded and laterally extensive lobe intervals. SSGF deposits triggered by sediment failures can be further subdivided according to their proximity to slumping: proximal, intermediate and distal parts. The proximal deposits are composed predominantly of slide and slump deposits. The intermediate deposits are dominated by sandy debrite tongues, while the distal deposits are composed predominantly of thin-bedded, surge-like, low-density turbidites. This study offers some insight into the types, origin of gravity-flow, as well as the distribution of their deposits in a lacustrine rift basin. Highlights • Types of subaqueous sediment gravity-flow in a lacustrine rift basin. • Origin of subaqueous sediment gravity-flow deposits in a lacustrine rift basin. • Controlling factors of distribution pattern of subaqueous sediment gravity-flow deposits in a lacustrine rift basin. • Depositional model of subaqueous sediment gravity-flow deposits in a lacustrine rift basin. [ABSTRACT FROM AUTHOR]

Understanding the flow processes that form gravity-flow deposits is vital for modeling and predicting sandstone bodies in the subsurface, which is of great significance for conventional and unconventional oil and gas exploration and development in lacustrine basins. This study analyses gravity-flow deposits of the Late Triassic Chang 7 oil member of the Yanchang Formation in the Ordos Basin, using a combination of well-log analysis, core observations, thin-section analysis, and laboratory measurements. The sedimentary facies, formation mechanisms, distribution patterns, and depositional models of gravity-flow deposits are investigated. Thirteen facies and eight bed-types are recognized in the gravity-flow deposits. Bed types represent deposits of sandy slides, sandy slumps, debrites, high-density turbidites, hybrid event beds, transitional flow deposits, surge-like low-density turbidites, and quasi-steady low-density turbidites. Gravity-flow deposits, particularly those caused by sediment failure, are composed of slides, slumps, debrites, high-density turbidites, hybrid event beds, transitional flow deposits, and surge-like low-density turbidites. These deposits form as isolated lenticular sand bodies, with retrogradational internal stacking patterns. In contrast, gravity-flow deposits caused by flooding rivers are composed of high-density turbidites, hybrid event beds, transitional flow deposits, and quasi-steady low-density turbidites. These deposits exhibit elongate morphologies with progradation stacking patterns internally. The collision between the North China Block and the South China Block, which occurred during the closing of the Qinling Ocean, lead to frequent volcanic eruptions and earthquakes. These activities promoted the development of gravity-flow deposits associated with sediment failure from delta fronts in both the northeastern and southwestern parts of the basin. Concurrently, extremely humid climatic conditions promoted increased fluvial drainage, leading to enhanced hyperpycnal flows into the deep-lacustrine basin depocenters in the Late Triassic. This study emphasized that detailed facies analysis and distribution pattern analysis are the fundamental way to identify the formation mechanisms of gravity flow deposits in lacustrine depression basins. • Thirteen facies and eight bed-types are recognized amongst the gravity-flow deposits in the Late Triassic Chang 7 oil member of the Yanchang Formation in the Ordos Basin, which are composed of sandy slide, sandy slump, muddy debrites, sandy debrites, hybrid event beds, transitional flow deposits, surge-like low-density turbidite, quasi-steady low-density turbidite. • Gravity-flow deposits in the late Triassic Chang 7 oil member of the Yanchang Formation in the Ordos Basin are due to both sediment failure and flooding river. • The collision between the north China block and the south China block during the closing of Qinling Ocean, and extremely humid environment in the Late Triassic promotes the development of gravity-flow deposits in the Ordos Basin. [ABSTRACT FROM AUTHOR]

The Eocene sandstones in the northern Dongying Sag, Bohai Bay Basin, China, are reservoirs for large accumulations of hydrocarbons. The sandstones are mainly lithic arkoses and feldspathic litharenites, texturally and compositionally immature. These sandstones have a wide range of porosity (0.4–37%) and permeability (0.004–6969 mD) and show an overall decrease in reservoir quality from 1500 m to 5000 m below sea level. The reduction in reservoir quality is a product of several digenetic processes; these include compaction, precipitation of dolomite and calcite in eodiagenetic stage; compaction, feldspar dissolution, precipitation of quartz cements and clays (kaolin and illite) and precipitation of ferrocalcite and ankerite in mesodiagenetic stage. Mineral distribution pattern and isotopic composition suggest carbonate cements in sandstones originate from sources outside the sandstones. Carbonate cementation, together with compaction reduced the sandstones’ porosity and permeability significantly. In a sandstone bed, marginal sandstones with distance to sandstone/mudstone interface less than one meter always have lower porosity than central sandstones. As burial depth exceeds 4000 m, marginal sandstones have very low porosities (<5%), indicating that thin sandstone beds (<2 m) were totally destroyed by cementation and compaction, and only thick sandstone beds (>2 m) can be potential effective reservoirs. Feldspar dissolution and precipitation of clays and quartz cements have little impact on absolute porosity. Mineral distribution pattern and quantitative data show that leached feldspars are the internal source of authigenic quartz and clays in sandstones, and the volume difference between feldspar secondary porosity and related authigenic cements is generally less than 0.25%. However, although there is little or no net import of matter to the sandstones, the pore architecture changes dramatically. Primary macropores are lost as clays and quartz precipitate while the proportion of microporosity increases, occurring mainly between clay crystals. The overall result is that permeability is significantly degraded. [ABSTRACT FROM AUTHOR]

Carbonates are suggested to dissolve rapidly than feldspars by laboratory experiments. Petrography texture of selective dissolution of feldspars in the presence of carbonates, however, is widespread in buried sandstones and even shales, inspiring a revisit to the chemistry of burial secondary pores. Feldspar dissolution, precipitation of secondary minerals (quartz, clays), and carbonate cementation are common chemical reactions in the Eocene sandstones in the northern Dongying Sag. Petrography evidence demonstrates the selective dissolution of feldspars in the presence of carbonate minerals (both detrital and authigenic minerals) in these buried sandstones. The equilibrium constant of calcite leaching reactions is much smaller than that of K-feldspar leaching reactions. Numerical simulations of chemical reactions in K-feldspar-calcite–CO 2 –H 2 O systems utilizing the Geochemist's Workbench 9.0 (GWB) indicate that only a small amount of calcite was dissolved at the onset of simulation processes, while much K-feldspar was dissolved with precipitation of quartz, clays and some calcite for extended periods of time. Precipitation of secondary calcite could also promote feldspar dissolution. Simulation of reactions in a simplified sandstone system with constraints of present-day pore water and partical pressure of carbon dioxide (pCO 2 ) in the northern Dongying Sag indicates that the pore waters are close to equilibrium with calcite. Petrography evidence and modeling results share consistence in confirming that only feldspar could be dissolved extensively, with precipitation of quartz, clays and some carbonate minerals. The organic CO 2 -leaching theory (Schmidt and McDonald, 1979) regarding the dissolution of mainly carbonates and, to a lesser degree, feldspars to form secondary pores has been questioned due to supposed extensive internal consumption of organic CO 2 in source rocks by carbonate minerals. The CO 2 in sandstones and shales and the isotopic composition of CO 2 and carbonate cements in sandstones, however, suggest migration of organic CO 2 from mudstones (even with large amounts of carbonate) to sandstones. Calculations in this study indicate that, with suppression of carbonate dissolution in sedimentary rocks, many secondary pores can be generated in sandstones through selective dissolution of feldspar by organic CO 2 from thermal evolution of organic matter. Selective dissolution of feldspars, rather than carbonates, in sedimentary rocks is then likely a general mechanism to decipher the chemistry of secondary porosity. Other secondary porosity generation mechanisms were also reevaluated with numerical simulations. Results demonstrate that reverse weathering reactions of silicates may take place with increasing of temperatures, but cannot provide enough H + to dissolve carbonates at elevated temperatures. Additionally, cooling of hot fluids can dissolve only insignificant amounts of carbonate unless significant amounts of water are provided. [ABSTRACT FROM AUTHOR]

The influence of oil-wet calcite cements on oil migration in clastic reservoirs is of significant interest in the field of petroleum exploration. However, the microscopic migration of oil in microscopic pore spaces with oil-wet calcite cements has not been directly observed. Microscopic observations of oil migration were conducted in a glass micromodel at normal temperature and pressure to investigate the influence mechanism of oil-wet calcite cements on oil migration in pore spaces. The calcites were precipitated as cements prior to the oil migration. A two-dimensional glass micromodel with two interconnected spaces with the same pore throat structures was used in the experimental study. A new method to create firmly adhering calcites was used to precipitate equal amounts of calcites in the two interconnected spaces. The oil migration was recorded in real-time under a microscope throughout the experiment. The experimental results show that oil migration occurs faster in spaces with than without oil-wet calcites. During the oil migration in the pore-throat spaces, the oil migrates towards the surfaces of the oil-wet calcites when the oil is in contact with the calcites. The presence of oil-wet calcites significantly reduces the oil breakthrough pressure. The electrostatic attraction between the carboxylic groups and calcites and the intermolecular forces between the carboxylic groups and organic molecules in the oil cause the oil migration towards the surfaces of the oil-wet calcites. The experimental results indicate that oil preferentially migrates into clastic reservoirs that possess appropriate amounts of oil-wet calcite cements precipitated prior to oil emplacement. • Experimental method that allows calcite to precipitate and adhere tightly in glass micromodel was developed. • Microscopic processes of the influence of oil-wet calcites on oil migration in pore spaces were observed in micromodel. • Mechanism of oil-wet carbonate minerals affecting oil migration and accumulation in pore spaces was discussed. [ABSTRACT FROM AUTHOR]

Carbonate concretion is an authigenic aggregation of minerals commonly found in sandstone and shale, especially in organic-rich shale. In the outcrop, large number of carbonate concretions developed in Chang 7 member in Tongchuan. Those concretions were studied in terms of stable isotope, clumped isotope to delineate its origin and sedimentary environment. Two types of concretions are identified. Type A concretionsmainly distribute in organic-rich shale. This concretion was divided into the inner circular layer and the outer circular layer. In the inner circular layer, the value of δ13C‰(VPDB) is 9.98‰~14.19‰, and the value of δ18O‰(VPDB) is −13.32‰~-10.07‰. On the contrary, the δ13C and δ18O value of outer circular layer are4.74‰~-0.59‰,-17.86‰~-15.59‰ respectively. The formation palaeotemperature of different parts of concretion ranged from 28.6 to 76.5 °C. This may be due to methanogenesis arising from bacterial activities in the fermentation zone, and the fractional distillation of carbon isotope of organic matter was caused by the methane bacterial activities. The calcite and dolomite spherulites in carbonate concretions may be due to the calcilization and dolomitization of cyanobacteria in the early diagenesis. The type B concretions were distributed in the fine sandstone, silty sandstone, and silty mudstone. The internal structure of concretions is uniform. The carbon isotopic values were negative, and δ13C was −5.019~-12.013‰, and the δ18O values was −17.6~-19.281‰. The value of 87Sr/86Sr was in the range of 0.710072–0.710392. The temperature was established at 60.4 °C through clumped isotopes analysis. Based on isotopic analysis, the formation palaeotemperature at different parts of concretion was 55.4–65.6 °C. The origin of the concretion may be related to dehydroxylation in diagenesis, formed in the early-middle stage of diagenesis. • Carbon, Oxygen and Strontium isotope are used in the article. • The origin of two kinds of concretions is discussed. • The formation temperature of concretions is determined by clumped isotope. [ABSTRACT FROM AUTHOR]