Search

Ten Longmaxi shale samples were collected from the Jiaoshiba area, China, where 5 billion cm3/year of shale gas is produced. The samples were evaluated to characterize the pores of various shale lithofacies. Three shale lithofacies were determined in the Jiaoshiba area, Sichuan Basin, China, based on the shale mineral components, namely, siliceous lithofacies (SL), argillaceous lithofacies (AL), and mixed lithofacies (ML). Field emission scanning electron microscopy (FE-SEM), which was performed under high and low voltages, GRI porosity, and carbon dioxide and nitrogen adsorptions were used to investigate the bulk-shale porosity, pore type, pore size, pore morphology, and pore volume among the lithofacies. Lithofacies affects the shale total organic carbon (TOC), bulk-shale porosity, pore size, shape, and volume. SL and ML contain high porosity, high TOC, abundant organic-matter (OM)-hosted pores, and high OM porosity, whereas AL contains few OM pores and has low TOC and low porosity. In the same lithofacies, samples with various TOC values exhibit different pore morphologies. For SL, the low-TOC sample has a round and elliptical OM pore forms, whereas the high-TOC samples show linear and narrow pore shapes that are probably associated with gas expulsion. In ML, the higher TOC is related to spherical or near-spherical OM pores, whereas the OM pore shape collapses in the low-TOC shale. Therefore, lithofacies affect the shale reservoir, and the characteristic and evolution of OM pores should be considered as constraints in shale lithofacies. In SL, sections with a higher TOC value are prime targets despite the high expulsion efficiency, which does not affect the enrichment and high yield of the shale gas. Sections of ML and low-TOC SL should be considered as potential targets because of higher OM porosity and low expulsion efficiency, whereas sections of AL engender risk in exploration and development of shale gas. • Lithofacies controlling porosity, mineral and OM pore diameters, OM porosity were researched. • OM pore types in different lithofacies were determined. • Pore preservation of rigid minerals calcite, dolomite, quartz were investigated. • Expulsion efficiency implication for shale gas enrichment was clarified. • An available method was introduced to determine the high production sections. [ABSTRACT FROM AUTHOR]

The petrophysical characteristics of unconventional reservoirs have significant impacts on hydrocarbon storage and transport. In this study, 26 shale samples with various lithofacies from Lower Silurian Longmaxi shales in the Jiaoshiba area of Sichuan Basin are investigated. The pore network (morphology, porosity, and pore structure parameters) is comprehensively characterized using scanning electron microscopy, helium pycnometry, and low-pressure gas adsorption techniques. Permeability coefficients are derived from pulse-decay measurements on parallel to bedding samples. Geological controls on the pore shape, porosity, pore size, pore size distribution, and permeability of the shales are analyzed, and quantitative relationships with which to estimate the permeabilities and pore-throat apertures controlling gas flow are developed. Three general lithofacies are summarized in view of their mineralogy: siliceous, argillaceous/siliceous mixed, and argillaceous shales. Pore structure parameters (porosity, specific surface area, and pore volume) show positive correlations with total organic carbon (TOC) content. Organic matter-hosted pores contribute to approximate 67% of the porosity of siliceous shales, while inorganic matter contributes to 55% of the porosity of argillaceous shales. Klinkenberg-corrected permeabilities range between 0.01 and 46.4 μD, and are controlled by the alignment of clay flakes. Negative relationships exist between TOC content, porosity, and permeability values. Siliceous shales generally have the lowest permeabilities, whereas the argillaceous shales with developed oriented clay flakes have relatively high permeabilities. The seepage-pore apertures, estimated using the Winland correlation, range from 9 to 476 nm. These values are much higher than those obtained from nitrogen adsorption analysis (adsorption-pore apertures). A power correlation exists between seepage-pore apertures and total clay minerals content of shales studied. A fracture model (sheet) is used to predict absolute permeability based on seepage-pore apertures. The predictions are reasonable, and justify the application of the sheet model and seepage-pore apertures. The siliceous shales are featured by a high TOC content, large porosity and specific surface area, and low permeability, which are favorable to gas preservation. • Petrophysical characteristics of Longmaxi shales are documented. • Geological controls on pore structure and permeability of shales are investigated. • Seepage-pore aperture controlling gas flow is calculated. • A new method for estimating permeability using seepage-pore aperture is proposed. [ABSTRACT FROM AUTHOR]

Widely developed in shale strata, laminae are the most typical shale sedimentary structure. To investigate their influence on shale gas reservoir quality, we conducted complementary studies by integrating microscopic observations, geochemical analyses, field-emission scanning electron microscopy (FE-SEM) imaging, and mercury intrusion capillary pressure (MICP) techniques. The microscopic observation of thin sections enabled us to detect the laminae characteristics, including the density and maximum thickness of individual lamina, and three types and stages of lamina development were identified. The total organic carbon (TOC) content, mineral composition, natural fracture, pore type, pore size distribution, porosity, permeability, and tortuosity were investigated in these different laminae types using FE-SEM, MICP and geochemical analysis. Combining the laminae characteristics and pore structure, we concluded that the organic pores and total pore area are mainly affected by the TOC content, whereas the development of the laminae controls the inorganic macropore scale and affects the pore size distribution. In addition, we found that the excessive development of shale laminae is not conducive to organic matter accumulation because of the change in redox condition, and because it has an adverse impact on the formation of complex artificial fractures during hydraulic fracturing. • Three laminae types were identified based on quantitative analysis. • Different laminae types show different pore structure characteristics. • Shale laminae influence the formation of natural fractures and artificial fractures. [ABSTRACT FROM AUTHOR]

The in-situ stress state of the eastern margin of the Sichuan Basin, where there is a complicated fault zone, is poorly understood. This study offers vital insights into the in-situ stress state based on information from 17 wellbores in the Wufeng-Longmaxi Shale near the eastern boundary fault (i.e., the Qiyueshan Fault) of the Sichuan Basin, China. Drilling-induced tensile fractures and borehole breakouts revealed a decrease in the angle between the S Hmax (maximum horizontal stress) orientation and fault strike when the wellbores are close to the damage zone of the Qiyueshan Fault. This stress rotation may be caused by the lateral contrast in the Poisson's ratio between the country rock and damage zone of the Qiyueshan Fault. A high angle between the S Hmax orientation and fault strike also appeared in the individual fault blocks of the Qiyueshan Fault as a result of local stress concentration. The higher magnitudes of horizontal stresses indicate stronger lateral compression in the Qiyueshan Fault Zone. Owing to the lateral compression of a "sandwich" consisting of a high-E (Young's modulus) roof and low-E shale intervals, natural fractures mainly appeared in the low-E shale intervals when the wellbore was close to the fault damage zone. The low fracture intensity in the low-E shale intervals of the wellbores located at the boundaries of the stress concentration blocks may be associated with an extensional stepover process. • Spatial variations in stress orientation and magnitude around the fault zone. • Lateral mechanical contrast decreases the angle between S Hmax and fault strike. • Stress concentration complicates S Hmax orientations in certain fault blocks. • Vertical mechanical contrast affects the natural fracture intensity of shale. [ABSTRACT FROM AUTHOR]

Both the characteristics of lithofacies and tectonic movements are important factors in controlling the development, destruction, and preservation of pores in shale reservoirs. However, the main factors that control the structure of shale pores are complex and highly disputed, restricting the understanding of the mechanisms that lead to the accumulation of shale gas. In this study, mineral composition and geochemical analyses, high resolution field emission scanning electron microscopy (FE-SEM), and low-pressure gas adsorption (N 2 and CO 2) were conducted to evaluate the pore systems of different types shale in the Jiaoshiba area, Sichuan Basin. A total of three shale groups, including silica-rich high production shales, clay-rich low production shales, and silica-rich low production shales were identified on the basis of lithofacies and gas-bearing characteristics. The highest values of TOC, pore volume, and specific surface area are found in the silica-rich high production shales, with an average of 4.182%, 33.04 × 10−3 cm3/g, and 38.71 m2/g, respectively. The total pore volume and specific surface area in the clay-rich low production shales are 19.85% and 28.62% lower than that of silica-rich high production shales. This suggests that the types of lithofacies have a more prominent influence on the specific surface area of the shales, while the pore volume plays a smaller role. However, the pressure in silica-rich low production shales is often released due to strong tectonic deformation. The OM pores in the silica-rich low production shales therefore tend to be both compressed and closed, with low surface porosity and of round shape. The total pore volume and specific surface area of silica-rich low production shales are 34.63% and 22.0% lower than that of the silica-rich high production shales. This indicates that tectonic movement has a significant influence on the shale pore volume, while specific surface area has a smaller influence. • Effects of lithofacies and preservation conditions on shale pores structure are analyzed. • Lithofacies mainly controls specific surface area and adsorbed gas. • Preservation conditions mainly controls shale pore volume and free gas. [ABSTRACT FROM AUTHOR]