Homogenizing and normalizing heat treatments were performed on low carbon-manganese steel. Then, direct and continuous annealing heat treatments were carried out at 800°C, 770°C, 750°C and 725°C. Finally; dual phase ferrite-martensite steel was obtained. Thereafter, hardness and tensile tests were applied at ambient temperature, and impact tests for the initial sample and the dual-phase steels obtained from continuous and direct annealing heat treatment in the temperature ranges of (-67 to +70),(-70 to +60), (-70 to +29), respectively, were accomplished. The ductile-brittle transition temperature (DBTT) and the fracture modes of the samples were obtained, and the fracture surface of the steel was observed through scanning electron microscopy (SEM). The results revealed that the best mechanical properties in dual-phase steels, like impact toughness and flexibility, appear at the inter-critical temperature of 725°C for both continuous and direct annealing cycles. The (DBTT) for the specimens obtained from direct and continuous annealing and the initial sample were -49°C, -6°C, and -34°C, respectively. The dual-phase specimen achieved through the direct annealing method had better toughness and impact properties than the initial specimen or the one obtained through continuous annealing. [ABSTRACT FROM AUTHOR]