Search

Magnesium-based bulk metallic glass matrix composites (BMGMCs) have better plasticity than the corresponding bulk metallic glasses (BMGs); however, their strength and density are often compromised due to the fact that the effective reinforcement phase is mostly plastic heavy metal. For lightweight SiC-particle reinforced BMGMCs, interface wettability and the sharpness of the particles often reduce the strengthening effect. In this work, SiC particles were coated with a thin Cu coating by electroless plating, and added to Mg54Cu26.5Ag8.5Gd11 melt in an amount of 5 wt % to prepare a BMGMC. The microstructure of the interface, mechanical behavior and fracture morphology of the BMGMC were studied by scanning electron microscopy and quasi-static compression testing. The results showed that the Cu coating improved the wettability between SiC and the matrix alloy without obvious interfacial reactions, leading to the dispersion of SiC particles in the matrix. The addition of Cu-coated SiC particles improved the plastic deformation ability of Mg54Cu26.5Ag8.5Gd11 BMG, proving that electroless plating was an effective method for controlling the interface microstructure and mechanical behavior of BMGMCs. [ABSTRACT FROM AUTHOR]

We presented the colorimetric and electrochemical methods for determination of the dipeptidyl peptidase-IV (DPP-IV) activity and screening of its inhibitor using gold nanoparticle (AuNP) as the probe. In the colorimetric assay, the substrate peptide with a sequence of Arg-Pro-Arg induced the aggregation and color change of AuNPs, whereas cleavage of the peptide by DPP-IV prevented the aggregation of AuNPs. Furthermore, the aggregation of AuNPs in the solution was easily initiated on a solid/liquid (electrode/electrolyte) surface, which induced a decrease in the electron-transfer resistance. However, once the peptide was clipped by DPP-IV, the assembly of AuNPs on electrode surface was prevented. Consequently, a higher electron-transfer resistance was observed. The colorimetric and electrochemical assays allowed for the determination of DPP-IV with the detection limits of 70 µU/mL and 0.55 µU/mL, respectively. Meanwhile, the proposed methods were used to determine DPP-IV inhibitor with satisfactory results. Both the colorimetric and electrochemical methods are simple, rapid and sufficiently sensitive for DPP-IV activity assay and inhibitor screening. The results also demonstrated that the AuNP-based colorimetric assay could be converted into an enhanced surface tethered electrochemical assay with improving sensitivity. The simple detection principle may be extended to the design of other peptidases biosensors with easy manipulation procedures. [ABSTRACT FROM AUTHOR]

In this work, Ga-doped ZnO (GZO) thin films were deposited via radio frequency sputtering at room temperature. The influence of the Ga content on the film's optoelectronic properties as well as the film's electrical stability were investigated. The results showed that the film's crystallinity degraded with increasing Ga content. The film's conductivity was first enhanced due to the replacement of Zn2+ by Ga3+ before decreasing due to the separation of neutralized gallium atoms from the ZnO lattice. When the Ga content increased to 15.52 at %, the film's conductivity improved again. Furthermore, all films presented an average transmittance exceeding 80% in the visible region. Regarding the film's electrical stability, GZO thermally treated below 200 °C exhibited no significant deterioration in electrical properties, but such treatment over 200 °C greatly reduced the film's conductivity. In normal atmospheric conditions, the conductivity of GZO films remained very stable at ambient temperature for more than 240 days. [ABSTRACT FROM AUTHOR]

Gold based structures such as nanoparticles (NPs) and nanowires (NWs) have widely been used as building blocks for sensing devices in chemistry and biochemistry fields because of their unusual optical, electrical and mechanical properties. This article gives a detailed review of the new properties and fabrication methods for gold nanostructures, especially gold nanowires (GNWs), and recent developments for their use in optical and electrochemical sensing tools, such as surface enhanced Raman spectroscopy (SERS). [ABSTRACT FROM AUTHOR]

Doxorubicin hydrochloride (DOX) is an effective anticancer agent for leukemia chemotherapy, although its clinical use has been limited because of its side effects such as cardiotoxicity, alopecia, vomiting, and leucopenia. Attention has been focussed on developing new drug carriers with high adsorption capacity and rapid adsorption rate in order to minimize the side effects of DOX. Graphene oxide (GO), a new type of nanomaterial in the carbon family, was prepared by Hummers method and used as adsorbent for DOX from aqueous solution. The physico-chemical properties of GO were characterized by transmission electron microscope (TEM), Fourier transform infrared spectroscopy (FTIR), zeta potential, and element analysis. The adsorption properties of DOX on GO were studied as a function of contact time, adsorbent dosage, temperature and pH value. The results showed that GO had a maximum adsorption capacity of 1428.57 mg/g and the adsorption isotherm data fitted the Langmuir model. The kinetics of adsorption fits a pseudo-second-order model. The thermodynamic studies indicate that the adsorption of DOX on GO is spontaneous and endothermic in nature. [ABSTRACT FROM AUTHOR]