Search

Lignocellulosic biomass (LCB)-based thermal insulation materials available in the market are more expensive than conventional ones and consist mainly of wood or agricultural bast fibers which are primarily used in construction and textile industries. Therefore, it is crucial to develop LCB-based thermal insulation materials from cheap and available raw materials. The study investigates new thermal insulation materials from locally available residues of annual plants like wheat straw, reeds and corn stalks. The treatment of raw materials was performed by mechanical crushing and defibration by steam explosion process. Optimization of thermal conductivity of the obtained loose-fill thermal insulation materials was investigated at different bulk density levels (30–45–60–75–90 kg m−3). The obtained thermal conductivity varies in range of 0.0401–0.0538 W m−1 K−1 depending on raw material, treatment mode and a target density. The changes of thermal conductivity depending on density were described by the second order polynomial models. In most cases, the optimal thermal conductivity was revealed for the materials with the density of 60 kg m−3. The obtained results suggest the adjustment of density to achieve an optimal thermal conductivity of LCB-based thermal insulation materials. The study also approves the suitability of used annual plants for further investigation towards sustainable LCB-based thermal insulation materials. [ABSTRACT FROM AUTHOR]

In this study, novel blends of mycelium biocomposites (MB) were developed. Various combinations of birch sawdust and hemp shives with birch bark (BB) and wheat bran (WB) additives were inoculated with basidiomycete Trametes versicolor to produce self-growing biomaterials. MB were characterized according to mycelial biomass increment in final samples, changes in chemical composition, elemental (C, H, N) analyses, granulometry of substrates, water-related and mechanical properties, as well as mold resistance and biodegradability. The mycelial biomass in manufactured MB increased by ~100% and ~50% in hemp and sawdust substrates, respectively. The lignocellulose ingredients during fungal growth were degraded as follows: cellulose up to 7% and 28% in sawdust and hemp substrates, respectively, and lignin in the range of 13% in both substrates. A larger granulometric fraction in hemp MB ensured higher strength property but weakened water absorption (600–880%) performance. Perspective MB combinations regarding strength performance were hemp/BB and pure hemp MB (σ10 0.19–0.20 MPa; E 2.9 MPa), as well as sawdust/WB combination (σ10 0.23 MPa; E 2.9 MPa). WB positively affected fungal biomass yield, but elevated water absorption ability. WB improved compressive strength in the sawdust samples but decreased it in the hemp samples. BB supplement reduced water absorption by more than 100% and increased the density of sawdust and hemp samples. All MB samples were susceptible to mold contamination after full water immersion, with identified fungal genera Rhizopus, Trichoderma and Achremonium. The MB exhibited high biodegradability after 12 weeks' exposure in compost, and are therefore competitive with non-biodegradable synthetic foam materials. [ABSTRACT FROM AUTHOR]