Search

In underground engineering, shear failure is a common failure type in coal-rock mass under medium and low strain-rate disturbance loads. Analyzing the shear failure mechanical properties of coal-rock mass under dynamic normal load is significant. In order to reveal the influence of disturbance load on the shear mechanical properties of coal rock, a dynamic and static load coupling electro-hydraulic servo testing machine was used to conduct the shear tests of coal-like rock materials under dynamic and constant normal load. The amplitude of dynamic load is 10 kN and the frequency is 5 Hz. The damage process of the specimens was detected by the acoustic emission (AE) detection system. The results imply that the shear failure process of coal-like rock materials under constant normal load can be divided into four stages. The normal disturbance decreased the shear strength of the specimens and increased the shear modulus of the specimens. With the increase in normal load, the influence of disturbance on the shear strength of the specimen decreased. By analyzing the AE parameters, it was found that the dynamic load made the internal damage of the specimen more severe during the shear failure process. The damage variable was calculated by AE cumulative energy, and the damage evolution was divided into three stages. The shear failure mechanism of the specimen was judged by RA (rise time/amplitude) and AF (average frequency). It was found that from the elastic deformation stage to the unstable development fracture stage, the proportion of shear fracture increased. When the dynamic normal load was 10 kN and 30 kN, the fracture was mainly shear fracture; When the dynamic normal load was 50 kN, the fracture was mainly tensile or mixed fracture. The dynamic normal load affects the shear strength and failure mechanism. Therefore, the influence of disturbance load on coal-rock mass strength cannot be ignored in underground engineering. [ABSTRACT FROM AUTHOR]

In order to study the weakening mechanism and mechanical behaviors of hard lamprophyre of Carboniferous Permian coal-bearing strata in China's mining area, lamprophyre samples were subjected to static rock dissolution experiments with pH values of 0, 2, and 4. The acid corrosion mechanism of lamprophyre was revealed from the weight changes of samples, characteristics of solution ion concentration, and macro-mechanical properties. The experimental results show that reaction occurred between lamprophyre and acid solution. With the increasing concentration of H+, the reaction was more intense, the degree of acid etching was higher, and the weight loss was greater. The internal damage induced by acid etching results in the slow extension of the compaction stage of stress–strain curve of uniaxial compression, and the obvious deterioration of mechanical properties of the lamprophyre. The uniaxial compressive strength of the lamprophyre in the dry state is 132 MPa, which decreased to 39 MPa under the acid etching condition, showing significant mudding characteristics. Dolomite (CaMg(CO3)2 with 19.63%) and orthoclase (KAlSi3O8 with 31.4%) in lamprophyre are the major minerals constituents involved in acidification reaction. Photomicrograph recorded from SEM studies reveals that the dissolution effect was directly related to the concentration of H+ in the solution. The dissolution effect was from the surface to the inside. The small dissolution pores became larger and continuously expanded, then finally formed a skeleton structure dominated by quartz. The content of K+, Ca2+, and Mg2+ in the solution after acid etching reaction indicates that the acidified product of orthoclase is colloidal H2SiO3, which adhered to the surface of samples during acid etching and hinders the further acidification of minerals. The dissolution of dolomite and orthoclase under acidic conditions directly leads to the damage of their structure and further promotes the water–rock interaction, which is the fundamental reason for the weakening of the mechanical properties of lamprophyre. [ABSTRACT FROM AUTHOR]