Search

This study focuses on the selection and evaluation of a kinetic model for the release of vitamin C from different delivery systems, including microcapsules, hydrogels, and a hybrid system combining both. The microcapsules were synthesized from a 2% sodium alginate solution and with vitamin C incorporated in selected formulations. Hydrogels were obtained through photopolymerization using poly(ethylene glycol) diacrylate and polyvinyl alcohol, with and without the addition of vitamin C. The hybrid system incorporated the vitamin C-containing microcapsules within the hydrogel matrix. Physicochemical properties, such as density, porosity, and water vapor transmission rate (WVTR), were evaluated. Kinetic studies of vitamin C release were conducted under dynamic and static conditions, and the experimental data were fitted to six different kinetic models: zero-order, first-order, second-order, Higuchi, Korsmeyer-Peppas, and Hixson-Crowell. The Higuchi and Korsmeyer-Peppas models provided the best fit for most systems, indicating that the release is predominantly controlled by diffusion and, in dynamic conditions, swelling of the matrix. The hybrid system, while exhibiting slower release than the microcapsules and hydrogel alone, demonstrated more controlled and sustained release, which is advantageous for applications requiring prolonged action.

Hard bone disease is a clinical problem affecting more than 20 million people annually worldwide, with significant health, social, and economic consequences. For successful integration of any implant, the key aspects are bone regeneration, osseointegration at the bone-implant interface, and the mitigation of inflammation. The purpose of this research work is to demonstrate an innovative material system and method of biomaterial preparation for regenerative medicine. A number of studies were carried out for both hydroxyapatite powder and composites. Wet-precipitated synthesized hydroxyapatite was compared to commercial products through accurate physicochemical studies that confirmed the high purity of the obtained calcium phosphate without any impurities. Ti/HAp composites before and after sintering were compared by XRF, XRD, SEM, EDS, PSA, and roughness measurements, and the Vickers microhardness was analyzed. The fabrication of the biomaterial was based on a bottom-up approach, which involved fabricating HAp particles with specific morphologies using powder metallurgy (PM) to sinter Ti composites. The resulting gradient structures consisting of two compositions (5%HAp%5CMC and 10%HAp10%CMC) mimic the structure of bone tissue. The created pores of 10-100 µm in size will allow bone cells to penetrate the implant and regenerate bone. In turn, the introduction of hydroxyapatite into the material reduces the microhardness of the composite and introduces properties such as bioactivity. The developed composite material contains a combination of Ti alloy and hydroxyapatite (HAp), creating an excellent biomaterial that promotes bone growth and eliminates the problem of implant loosening by integrating it into the bone. This material requires further research, especially biological research. However, it shows promising potential for further experiments.

The article explores innovative methods for creating high-insulation walls, essential for the future of energy-efficient and sustainable construction. It focuses on advanced 3D-printing technologies that allow for the construction of walls with superior insulation materials, optimizing thermal properties and significantly reducing energy for heating and cooling. The integration of thermal insulation within wall structures and innovations in building materials like lightweight composites, aerogels, and nanotechnology-based insulations are highlighted. It discusses the environmental, economic, and technical benefits of these innovations and the challenges to fully leverage 3D printing in construction. Future development directions emphasize materials that enhance thermal efficiency, sustainability, and functionality, promising a new era of sustainable and innovative construction practices.

Three-dimensional printing technology in construction is a rapidly growing field that offers innovative opportunities for design and construction execution. A key component of this process is the automated production of high-performance construction mixtures that meet specific requirements for strength, fluidity, and setting speed. This overview article outlines the history and development of 3D printing technology in the construction industry, describes various printing technologies, and discusses the properties and requirements for construction mixes. Special attention is given to automated systems for batching and mixing ingredients, which increase the precision and efficiency of production. The different types of construction mixes used in 3D printing and the main technical and operational challenges associated with their application are also presented. The article's conclusions highlight the potential of this technology to revolutionize the construction industry by improving efficiency and reducing costs and project lead times.

Hydrogel materials are used in many fields of science and industry. They are of particular importance in biomedical applications. In this work, hydrogels were obtained that could act as a dressing for wounds, at the same time being a carrier of substances with antioxidant activity. The discussed materials were obtained in the field of UV radiation. The correlation between the amount of photoinitiator used and the physicochemical properties and surface morphology of the obtained materials was investigated. In addition, the hydrogels have been incorporated with wild rose extract, which is characterized by antioxidant and anti-inflammatory effects. The analysis of the sorption capacity confirmed that the obtained material is able to absorb significant amounts of incubation fluids, which, in terms of application, will enable the absorption of exudate from the wound. The highest stability of materials was noted for hydrogels obtained with the use of intermediate amounts of photoinitiator, i.e., 50 µL and 70 µL. In the case of using 20 µL or 100 µL, the photopolymerization process did not proceed properly and the obtained material was characterized by a lack of homogeneity and high brittleness. With the increase in the amount of photoinitiator, an increase in the surface roughness of hydrogel materials was confirmed. In turn, spectroscopic analysis ruled out the degradation of materials in incubation fluids, indicating the potential for their use in biomedical applications.

Injection molding is a method commonly used to manufacture plastic products. This technology makes it possible to obtain products of specially designed shape and size. In addition, the developed mold allows for repeated and repeatable production of selected plastic parts. Over the years, this technology grew in importance, and nowadays, products produced by injection molding are used in almost every field of industry. This paper is a review and provides information on recent research reports in the field of modern injection molding techniques. Selected plastics most commonly processed by this technique are discussed. Next, the chosen types of this technique are presented, along with a discussion of the parameters that affect performance and process flow. Depending on the proposed method, the influence of various factors on the quality and yield of the obtained products was analyzed. Nowadays, the link between these two properties is extremely important. The work presented in the article refers to research aimed at modifying injection molding methods enabling high product quality with high productivity at the same time. An important role is also played by lowering production costs and reducing the negative impact on the environment. The review discusses modern injection molding technologies, the development of which is constantly progressing. Finally, the impact of the technology on the ecological environment is discussed and the perspectives of the process were presented.

Hydrogels belong to the group of polymers that are more and more often considered as innovative dressing materials. It is important to develop materials showing the most advantageous properties from the application viewpoint wherein in the case of hydrogels, the type and the amount of the crosslinking agent strongly affect their properties. In this work, PVP-based hydrogels containing Aloe vera juice and L-ascorbic acid were obtained via UV-induced polymerization. Next, their surface morphology (via both optical, digital and scanning electron microscope), sorption capacity, tensile strength, and elongation were characterized. Their structure was analyzed via FT-IR spectroscopy wherein their impact on the simulated body liquids was verified via regular pH and temperature measurements of these liquids during hydrogels' incubation. It was demonstrated that as the amount of the crosslinker increased, the polymer structure was more wrinkled. Next, hydrogels showed relatively smooth and only slightly rough surface, which was probably due to the fact that the modifiers filled also the outer pores of the materials. Hydrogels demonstrated buffering properties in all incubation media, wherein during the incubation the release of Aloe vera juice probably took place as evidenced by the decrease in the pH of the incubation media and the disappearance of the absorption band deriving from the polysaccharides included in the composition of this additive. Next, it was proved that as the amount of the crosslinker increased, hydrogels' crosslinking density increased and thus their swelling ratio decreased. Hydrogels obtained using a crosslinking agent with higher average molecular weight showed higher swelling ability than the materials synthesized using crosslinker with lower average molecular weight. Moreover, as the amount of the crosslinking agent increased, the tensile strength of hydrogels as well as their percentage elongation also increased.

In recent times, a great interest is directed to developing biomaterials incorporated with various therapeutical substances which may enhance them with new properties and thus increase their application potential. In this work, polyvinylpyrrolidone (PVP)-based hydrogels modified with Aloe vera juice and vitamin C and differing in the amount of the photoinitiator used during their synthesis were developed. Analysis of hydrogels included characterization of their chemical structure via FT-IR spectroscopy, sorption properties, wettability, surface morphology, behavior in simulated physiological liquids and mechanical properties. Finally, hydrogels' cytotoxicity towards L929 murine fibroblasts using MTT reduction assay was additionally verified. It was demonstrated that as the amount of the photoinitiator used during the synthesis of hydrogels increased, the smoother their surface and the higher their hydrophilicity. Next, the greater the amount of the photoinitiator, the lower is the percentage elongation of the hydrogel and the greater the hardness. In turn, the swelling ability of hydrogels depended strongly on the type of the absorbed liquid-swelling ratios of samples in distilled water were 24% higher than in SBF, 18% higher than in Ringer liquid, and 32% higher than in hemoglobin wherein the amount of the photoinitiator did not affect this property. Additionally, hydrogels were stable and did not degrade in simulated physiological liquids. The only changes in pH of the incubation media were probably caused by the active substances release from hydrogels which was also confirmed via a lesser intensity of the absorption band on FT-IR spectra corresponding to the functional group occurring in compounds included in Aloe vera juice. Importantly, the viability of fibroblasts incubated with developed materials was at least 86%. Thus the hydrogels, due to their properties, seem to show application potential to be used for biomedical purposes, e.g., as innovative dressing materials.