Search

This study presents novel life cycle assessment (LCA) findings on hydrochar production from Saudi-Arabia-based date palm fronds biomass waste using hydrothermal carbonization (HTC). The LCA procedure incorporated normalization, weighting, and improvement assessment. The system boundary encompassed water consumption and energy requirements within a lab setting representing a gate-to-gate process. The OpenLCA 1.11.0 software with the European Life Cycle Database 3.2 (ELCD 3.2) was utilized for the study and we employed the ReCiPe Midpoint (H) 2016 and Environmental Footprint 3.0 (EF 3.0) impact assessment methods. The results indicated that fossil fuel usage represented the most significant impact category with the HTC and drying processes identified as major contributors. It was also observed that the HTC process exerted far greater detrimental impacts on the environment than the biomass grinding process. The overwhelming impact of fossil fuel resources could be mitigated by optimizing the batches of biomass or hydrochar samples in each operation, which could alleviate fossil fuel consumption by up to 94%. The findings emphasize the need for targeted interventions to mitigate the environmental burden and contribute to sustainable hydrochar production.

For thermal energy storage, the most promising method that has been considered is latent heat storage associated with molten salt mixtures as phase-change material (PCM). The binary salt mixture lithium chloride-lithium hydroxide (LiCl-LiOH) with a specific composition can store thermal energy. However, to the best of our knowledge, there is no information on their thermal stability in previous literature. The key objectives of this article were to investigate the thermophysical properties, thermal repeatability, and thermal decomposition behavior of the chosen binary salt mixture. FactSage software was used to determine the composition of the binary salt mixture. Thermophysical properties were investigated with a simultaneous thermal analyzer (STA). The thermal results show that the binary salt 32 mol% LiCl-68 mol% LiOH melts within the range of 269 °C to 292 °C and its heat of fusion is 379 J/g. Thermal repeatability was tested with a thermogravimetric analyzer (TGA) for 30 heating and cooling cycles, which resulted in little change to the melting temperature and heat of fusion. Thermal decomposition analysis indicated negligible weight loss until 500 °C and showed good thermal stability. Chemical and structural instability was verified by X-ray diffraction (XRD) by analysing the binary salt system before and after thermal treatment. A minor peak corresponding to lithium oxide was observed in the sample decomposed at 700 °C which resulted from the decomposition of LiOH at high temperature. The morphology and elemental distribution examinations of the binary salt mixture were carried out via scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS). X-ray photoelectron spectroscopy was conducted for surface analysis, and their elemental composition verified the chemical stability of the binary salt mixture. Overall, the results confirmed that the binary salt mixture is a potential candidate to be used as thermal energy storage material in energy storage applications of up to 500 °C.

This paper reviews the phase structures and oxidation kinetics of complex Ti-Al alloys at oxidation temperatures in the range of 600-1000 °C. The mass gain and parabolic rate constants of the alloys under isothermal exposure at 100 h (or equivalent to cyclic exposure for 300 cycles) is compared. Of the alloying elements investigated, Si appeared to be the most effective in improving the oxidation resistance of Ti-Al alloys at high temperatures. The effect of alloying elements on the mechanical properties of Ti-Al alloys is also discussed. Significant improvement of the mechanical properties of Ti-Al alloys by element additions has been observed through the formation of new phases, grain refinement, and solid solution strengthening.