Search

Drilling for implant site preparation generates heat, which can cause bone necrosis if temperatures exceed 47 °C for over a minute. Factors influencing heat include drill size, speed, pressure, irrigation, and tool wear. Frequent drill replacement is essential, as wear from repeated use and sterilization affects performance. This study compared three pilot drills with similar designs from different manufacturers, testing each on pig ribs for 15 perforations after 15 sterilization cycles. Researchers measured temperature increase, drilling time, and surface wear. Results showed that drill no. 1 generated more heat than drills no. 2 and no. 3, though none reached critical temperatures. Drill no. 2 took the longest to reach the desired depth and displayed the most deformation. Findings highlight the importance of adhering to the recommended operational limits, suggesting that drills should be replaced after 15 cycles to ensure efficacy and patient safety.

This study aimed to investigate the histological features of deproteinized equine bone mineral (DEBM) and anorganic bovine bone (ABB) after human sinus augmentation with the lateral approach. Twenty-three sinus augmentations were performed in 16 patients (male: 10/female: 6) using DEBM or ABB in a randomized fashion. Healing took place over the next 6 months. Bone core biopsies (N = 23) were obtained for each subject prior to placing the dental implants. The biopsies were processed for both histological descriptions and histomorphometric analysis. Statistical analyses were applied as appropriate, defining statistical significance as p < 0.05. Core bone biopsies revealed no differences in terms of newly formed bone between groups, or differences in terms of tissue inflammation. Both DEBM and ABB appear to be suitable biomaterials for bone augmentation in sinus lift surgery in the short term. However, dedicated studies are required to confirm these results and their stability in the long term.

Invisible orthodontic aligners (IOAs) have been introduced in the orthodontic field as an innovative alternative for fixed brackets, in relation to their ability to be easily inserted/removed from the oral cavity without affecting the chewing ability and the aesthetic of the patients. The paper provides a complete physicochemical and mechanical characterization of thermoplastic materials in the form of disks used for commercial IOAs. A wide palette of specific techniques is considered, from tensile tests and dynamic-mechanical analysis, to X-Ray diffraction (XRD), differential scanning calorimetry (DSC), Fourier transformation infrared spectroscopy (FTIR-ATR) analyses and water absorption tests. The disks are investigated before and after immersion into staining beverages (red wine, coffee, nicotine and artificial saliva), in terms of colour variations, transparency, and microscopic surface modifications by means of colorimetry, UV-VIS absorbance and scanning electron microscopy (SEM). Among all the samples, polyurethane (PU) exhibited the highest crystallinity and the highest values of mechanical and thermal resistance, while the poly(ethylene terephthalate)-glycol (PETG) samples presented better transparency and less ability to absorb water. Moreover, red wine and coffee give noticeable colour variations after 14 days of immersion, together with a slight reduction of transparency.