Search

In this work, titania nanotube arrays (TiO 2 -NTs) were prepared by anodization, and the Eu(III) complexes (Eu (TTA) 3 phen with 2-thenoyltrifluoroacetone (TTA) and 1, 10-phenanthroline (phen)) were successfully coated onto the walls of the nanotubes. When a solution of glucose, cholesterol or triglycerides was dropped onto Eu(III) complex-modified TiO 2 -NTs, the fluorescence intensity of this material changes (glucose enhances fluorescence, cholesterol and triglycerides quench fluorescence). These phenomena are explained via an energy transfer process. The sensitivity of the fluorescence intensity to glucose, cholesterol or triglycerides concentration enables design of a multifunctional solid sheet-like detector. Under optimized experimental conditions, the change in fluorescence intensity ratio (ΔF/F 0) is linear with the concentration of glucose, cholesterol or triglycerides. To test the utility of the detector, glucose in orange juice, cholesterol in milk powder, and triglycerides in coconut oil were measured using this method and the results were in good agreement analytical data provided by a food testing company. The new method proposed here is simple, sensitive, reliable and suitable for practical applications. Unlabelled Image • Europium modified TiO 2 nanotube arrays were prepared by one-step anodization and in-situ Eu complex coating. • Fluorescence intensity of Europium modified TiO 2 nanotube arrays show good selectivity to glucose/cholesterol/triglycerides. • Europium modified TiO 2 nanotube arrays can accurately detect glucose, cholesterol or triglycerides content in food. • This method proposed is simple, sensitive, reliable and suitable for practical applications. [ABSTRACT FROM AUTHOR]

To develop hemocompatible surfaces, a cationic tannin derivate (TN) was used to prepare polyelectrolyte multilayers (PEMs) with the glycosaminoglycans heparin (HEP) and chondroitin sulfate (CS). The surface chemistry of the PEMs was characterized using X-ray photoelectron spectroscopy and water contact angle measurements. PEMs assembled with chitosan (CHI) and HEP or CS were used as controls. We investigate the hemocompatibility of PEMs by analyzing the adsorption of key blood serum proteins, adhesion and activation of platelets, and blood clotting kinetics. TN- and CHI-based PEMs adsorb similar amounts of albumin, whereas fibrinogen adsorption was more pronounced on TN-based PEMs, due to strong association with catechol groups. However, TN-based PEMs significantly reduce both platelet adhesion and platelet activation, while CHI-based PEMs promote platelet adhesion and activation. The whole-blood clotting kinetics assay also shows lower blood coagulation on TN-based PEMs. TN is an amphoteric, cationic, condensed tannin derivative with resonance structures. It also contains catechol groups, which are similar to those in mussel adhesive protein. These chemical features enable strong association with fibrinogen, which promotes the platelet-repelling effect. This study provides a new perspective for understanding platelet adhesion and activation on biomaterial surfaces, toward the development of new blood-compatible surfaces using a tannin derivative-based polymer. • Novel GAGs-Tanfloc polyelectrolyte multilayers reduce platelet adhesion on surfaces. • New surfaces also reduce whole blood clotting. • Blood compatibility properties can be related to the chemical structure of Tanfloc. • Heparin-Tanfloc polyelectrolyte multilayer is a promising candidate for developing blood-compatible surface coatings. [ABSTRACT FROM AUTHOR]

This study reports the synthesis, characterization and biological properties of films based on poly(vinyl alcohol) (PVA) and a cationic tannin polymer derivative (TN). Films are obtained from polymeric blends by tuning the PVA/TN weight ratios. The materials are characterized through infrared spectroscopy, X-ray photoelectron spectroscopy, contact angle measurements, mechanical analyses, and scanning electron microscopy. More hydrophilic surfaces are created by modulating the PVA and TN concentrations in the blends. Disintegration tests showed that the films present durability in phosphate buffer (pH 7.4) and low stability in simulated gastric fluid (pH 1.2). The film created at 90/10 PVA/TN weight ratio and crosslinked at 109 PVA/glutaraldehyde molar ratio (sample PVA10/TN10) supports the attachment and proliferation of bone marrow mesenchymal stem cells after 7 days of culture. The scaffolding capacity of the PVA10/TN10 surface is compared with titanium, one of the most important biomedical materials used in bone replacements. Also, the PVA/TN films exhibited cytocompatibility, antioxidant and antimicrobial activity against Staphylococcus aureus and Pseudomonas aeruginosa. These properties make PVA/TN films are candidates for biomedical applications in the tissue engineering field. Image 1 • New poly(vinyl alcohol)/cationic tannin films are produced. • The more hydrophilic film surface has antimicrobial and antioxidant activities. • The hydrophilic film supports the attachment and proliferation of cells. [ABSTRACT FROM AUTHOR]

Here, we have demonstrated the production and characterization of hydrogel scaffolds based on chitosan/gellan gum (CS/GG) assemblies, without any covalent and metallic crosslinking agents, conventionally used to yield non-soluble polysaccharide-based materials. The polyelectrolyte complexes (physical hydrogels called as PECs) are characterized by Fourier-transform infrared spectroscopy, wide-angle X-ray scattering, and scanning electron microscopy. Hydrogels containing chitosan (CS) excesses (ranging from 60 to 80 wt%) were created. Durable polysaccharide-based scaffolds with structural homogeneity and interconnecting pore networks are developed by modulating the CS/GG weight ratio. The CS/GG hydrogel prepared at 80/20 CS/GG weight ratio (sample CS/GG80-20) is cytocompatible, supporting the attachment, growth, and spreading of bone marrow mesenchymal stem cells (BMSCs) after nine days of cell culture. The cytocompatibility is correlated to the swelling capacity of the PEC in PBS buffer (pH 7.4). By controlling the CS content, we can tune the water uptake of the material, enhancing the capacity to serve as a three-dimensional cell scaffold for BMSCs. This work presents for the first time that CS/GG hydrogels can be applied as scaffolds for tissue engineering purposes. Image 1 • Durable chitosan/gellan gum scaffold assemblies are developed. • Chitosan/gellan gum hydrogels are cytocompatible. • The hydrogel promotes growth and spreading of bone mesenchymal stem cells. • Scaffolding behavior is achieved by increasing the chitosan content into the hydrogel. [ABSTRACT FROM AUTHOR]