1. Solution-processed phosphorus-tungsten oxide film as hole injection layer for application in efficient organic light-emitting diode.
- Author
-
Deng, Weiwei, Wang, Shirong, Xiao, Yin, Zhou, Nonglin, and Li, Xianggao
- Subjects
- *
ORGANIC light emitting diodes , *PHOSPHOTUNGSTIC acids , *TUNGSTEN oxides , *THIN films , *SPIN coating - Abstract
The research on new functional layer materials and optimization of fabrication in organic light-emitting diode (OLED) has been continuously concerned. In this work, phosphotungstic acid solution used as a precursor is spin-coated onto ITO anode, and then a phosphorus-tungsten oxide (WO 3 -P 2 O 5 ) film is obtained after annealing treatment. Various parameters which include film composition, surface morphology, work function and optical property are measured. It suggests that the film has the composition of 24 WO 3 ·P 2 O 5 annealed at 200 °C, which exhibits work function of 5.55 eV, surface root mean square (RMS) roughness value of 1.525 nm and optical transmittance of over 92%. The WO 3 -P 2 O 5 film is used as hole injection layer (HIL), and the OLED with the structure of [ITO/ WO 3 -P 2 O 5 / TPD/ Alq 3 / LiF/ Al] is fabricated. The performance of device shows turn-on voltage of 2.6 V, maximum luminance of 13553 cd/m 2 , maximum current efficiency of 5.87 cd/A and maximum power efficiency of 3.44 lm/W, respectively. The results provide a new way to deposit HIL based on solution-processed metal oxide in efficient OLED. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF