Search

Fifth generation (5G) networks support ultra-reliable low-latency communications (URLLC) and enhanced mobile broadband (eMBB). The coexistence of URLLC and eMBB is often organized by non-orthogonal multiple access (NOMA), giving priority to URLLC and resulting in eMBB quality of service (QoS) degradation. In this paper, we address the issue of joint URLLC and eMBB transmission, focusing on the problem from the perspective of delay-tolerant eMBB. Due to the priority given to URLLC, we assume that an eMBB session may be interrupted if there are no free resources available for URLLC or delayed when a new eMBB session arrives. To make the scheme more flexible, we propose that interrupted and delayed eMBB sessions periodically check for free resources, rather than continuously. To analyze this scenario, we propose a retrial queuing system with two retrial buffers (orbits) for interrupted and delayed eMBB sessions. The stationary probability distribution, provided in matrix form by recursive formulas, is presented. The paper concludes with a numerical example showing that the scheme with two buffers, compared to one buffer, practically doubles the average number of active eMBB sessions while keeping the interruption probability below 0.001. We provide an illustration of the configuration of eMBB retrial rates to meet its QoS requirements. [ABSTRACT FROM AUTHOR]

With advances in Internet of Things (IoT) technologies, billions of devices are becoming connected, which can result in the unprecedented sensing and control of the physical environments. IoT devices have diverse quality of service (QoS) requirements, including data rate, latency, reliability, and energy consumption. Meeting the diverse QoS requirements presents great challenges to existing fifth-generation (5G) cellular networks, especially in unprecedented scenarios in 5G networks, such as connected vehicle networks, where strict data packet latency may be required. The IoT devices with these scenarios have higher requirements on the packet latency in networking, which is essential to the utilization of 5G networks. In this paper, we propose a multi-tier cellular-based IoT network to address this challenge, with a particular focus on meeting application latency requirements. In the multi-tier network, access points (APs) can relay and forward packets from IoT devices or other APs, which can support higher data rates with multi-hops between IoT devices and cellular base stations. However, as multiple-hop relaying may cause additional delay, which is crucial to delay-sensitive applications, we develop new schemes to mitigate the adverse impact. Firstly, we design a traffic-prioritization scheduling scheme to classify packets with different priorities in each AP based on the age of information (AoI). Then, we design different channel-access protocols for the transmission of packets according to their priorities to ensure the QoS in networking and the effective utilization of the limited network resources. A queuing-theory-based theoretical model is proposed to analyze the packet delay for each type of packet at each tier of the multi-tier IoT networks. An optimal algorithm for the distribution of spectrum and power resources is developed to reduce the overall packet delay in a multi-tier way. The numerical results achieved in a two-tier cellular-based IoT network show that the target packet delay for delay-sensitive applications can be achieved without a large cost in terms of traffic fairness. [ABSTRACT FROM AUTHOR]

Polar codes, as the coding scheme for the control channel in fifth-generation mobile communication technology (5G), have attracted widespread attention since their proposal. As a mainstream decoding algorithm for polar codes, the successive cancellation list (SCL) decoder usually improves the error correction performance by increasing the list size, but this method suffers from the problems of high decoding complexity. To address this problem, this paper proposes a layered-search bit-flipping (LS-SCLF) decoding algorithm based on SCL decoding. Firstly, a new flip-bit metric is proposed, which derives a formula to approximate the probability of an error occurring in an information bit. This formula introduces a perturbation parameter to improve the calculation accuracy. Secondly, a compromise scheme for determining the perturbation parameter is proposed. The scheme uses Monte Carlo simulation to determine an optimized parameter for the precise positioning of the first erroneous decoded bit under different decoding conditions. Finally, a layered search strategy is adopted to sequentially search the erroneous decoded bits from the low order to high order, which can correct up to multiple bits at the same time. Simulation results show that the proposed algorithm achieves improved error correction performance with a slight increase in decoding complexity compared to the generalized SCL-Flip (GSCLF) decoding algorithm. This algorithm also achieves a good balance between the error correction performance and decoding complexity. [ABSTRACT FROM AUTHOR]

In the realm of advanced mobile networks, such as the fifth generation (5G) and beyond, the increasing complexity and proliferation of devices and unique applications present a substantial challenge for User Association (UA) in wireless systems. The problem of UA in wireless networks is multifaceted and requires comprehensive exploration. This paper presents a pioneering approach to the issue, integrating a Deep Q-Network (DQN) with a Graph Neural Network (GNN) to enhance user-base station association in wireless networks. This novel approach surpasses recent methodologies, including Q-learning and max average techniques, in terms of average rewards, returns, and success rate. This superiority is attributed to its capacity to encapsulate intricate relationships and spatial dependencies among users and base stations in wireless systems. The proposed methodology achieves a success rate of 95.2%, outperforming other methodologies by a margin of up to 5.9%. [ABSTRACT FROM AUTHOR]

Device density in cellular networks is expected to increase considerably in the near future. Accordingly, the access point (AP) will be equipped with massive multiple-input multiple-output (mMIMO) antennas, using collimated millimeter-wave (mmW) and sub-THz communications, and increasing the bandwidth to accommodate the growing data rate demands. In this scenario, interference plays a critical role and, if not characterized and mitigated properly, might limit the performances of the network. In this context, this paper derives the statistical properties of the aggregated interference power for a cellular network equipping a mMIMO cylindrical array. The proposed statistical model considers the link blockage and other network parameters such as antenna configuration and device density. The findings show that the characteristic function (CF) of the aggregated interference power can be regarded as a weighted mixture of two alpha-stable distributions. Furthermore, by analyzing the service probability, it is found that there is an optimal configuration of the array depending on the AP height and device density. The proposed statistical model can be part of the design of dense networks providing valuable insights for optimal network deployment and resource management and scheduling. [ABSTRACT FROM AUTHOR]

With the rapid advancements of the internet of things (IoT), several applications have evolved with completely dissimilar structures and requirements. However, the fifth generation of mobile cellular networks (5G) is unable to successfully support the dissimilar structures and requirements. The sixth generation of mobile cellular networks (6G) is likely to enable new and unidentified applications with varying requirements. Therefore, 6G not only provides 10 to 100 times the speed of 5G, but 6G can also provide dynamic services for advanced IoT applications. However, providing security to 6G networks is still a significant problem. Therefore, in this paper, a hybrid image encryption technique is proposed to secure multimedia data communication over 6G networks. Initially, multimedia data are encrypted by using the proposed model. Thereafter, the encrypted data are then transferred over the 6G networks. Extensive experiments are conducted by using various attacks and security measures. A comparative analysis reveals that the proposed model achieves remarkably good performance as compared to the existing encryption techniques. [ABSTRACT FROM AUTHOR]

The 5th generation (5G) wireless networks propose to address a variety of usage scenarios, such as enhanced mobile broadband (eMBB), massive machine-type communications (mMTC), and ultra-reliable low-latency communications (URLLC). Due to the exponential increase in the user equipment (UE) devices of wireless communication technologies, 5G and beyond networks (B5G) expect to support far higher user density and far lower latency than currently deployed cellular technologies, like long-term evolution-Advanced (LTE-A). However, one of the critical challenges for B5G is finding a clever way for various channel access mechanisms to maintain dense UE deployments. Random access channel (RACH) is a mandatory procedure for the UEs to connect with the evolved node B (eNB). The performance of the RACH directly affects the performance of the entire network. Currently, RACH uses a uniform distribution-based (UD) random access to prevent a possible network collision among multiple UEs attempting to access channel resources. However, in a UD-based channel access, every UE has an equal chance to choose a similar contention preamble close to the expected value, which causes an increase in the collision among the UEs. Therefore, in this paper, we propose a Poisson process-based RACH (2PRACH) alternative to a UD-based RACH. A Poisson process-based distribution, such as exponential distribution, disperses the random preambles between two bounds in a Poisson point method, where random variables occur continuously and independently with a constant parametric rate. In this way, our proposed 2PRACH approach distributes the UEs in a probability distribution of a parametric collection. Simulation results show that the shift of RACH from UD-based channel access to a Poisson process-based distribution enhances the reliability and lowers the network's latency. [ABSTRACT FROM AUTHOR]

User equipment (UE) location estimation in emerging 5G/B5G/6G Ultra-Dense Networks (UDNs) is a breakthrough technology in future wireless info-communication ecosystems. Apart from communication aspects, network infrastructure densification promises significant improvement in UE positioning accuracy. Unlike networks of previous generations, an increased number of gNodeBs (gNBs) per unit area and/or volume in UDNs allows to perform measurements for UE positioning only with those base stations whose topologies are most suitable from the geometric point of view. Quantitative measurements of gNB topology suitability include horizontal (HDOP), vertical (VDOP), and position (PDOP) dilution of the precision (DOP) criteria on the plane, in height, and in space, respectively. In the current work, we formalize a set of methods for gNB topology search using time of arrival (TOA), time difference of arrival (TDOA), angle of arrival (AOA), and combined TOA–AOA and TDOA-AOA measurements. The background of the topology search using DOP criteria is a significantly increased number of gNBs per unit volume in UDNs. Based on a simulation, we propose a novel approach for a topology search in a positioning service area, resulting in a PDOP less than one for the Gazprom Arena with only five gNBs. The contribution of the current research includes algorithm and software for an iterative search of all possible gNB and UE locations in space, minimizing UE geometric DOP. The practical application of the algorithm is the gNB topology substantiation for the given positioning scenarios in 5G/B5G/6G UDNs. [ABSTRACT FROM AUTHOR]

The Third Generation Partnership Project (3GPP) and the International Telecommunication Union (ITU) identified the technical requirements that the fifth generation of mobile communications networks (5G) had to meet; within these parameters are the following: an improved data rate and a greater number of users connected simultaneously. 5G uses non-orthogonal multiple access (NOMA) to increase the number of simultaneously connected users, and by encoding data it is possible to increase the spectral efficiency (SE). In this work, eight codewords are used to transmit three bits simultaneously using Sparse Code Multiple Access (SCMA), and through singular value decomposition (SVD) the Euclidean distance between constellation points is optimized. On the other hand, applications of machine intelligence and machine intelligence in 5G and beyond communication systems are still developing; in this sense, in this work we propose to use machine learning for detecting and decoding the SCMA codewords using neural networks. This paper focuses on the Use Case of enhanced mobile broadband (eMBB), where higher data rates are required, with a large number of users connected and low mobility. The simulation results show that it is possible to transmit three bits simultaneously with a low bit error rate (BER) using SVD-SCMA in the uplink channel. Our simulation results were compared against recent methods that use spatial modulation (SM) and antenna arrays in order to increase spectral efficiency. In adverse Signal-to-Noise Ratio (SNR), our proposal performs better than SM, and antenna arrays are not needed for transmission or reception. [ABSTRACT FROM AUTHOR]

The popularity of deep reinforcement learning (DRL) applications in economics has increased exponentially. DRL, through a wide range of capabilities from reinforcement learning (RL) to deep learning (DL), offers vast opportunities for handling sophisticated dynamic economics systems. DRL is characterized by scalability with the potential to be applied to high-dimensional problems in conjunction with noisy and nonlinear patterns of economic data. In this paper, we initially consider a brief review of DL, RL, and deep RL methods in diverse applications in economics, providing an in-depth insight into the state-of-the-art. Furthermore, the architecture of DRL applied to economic applications is investigated in order to highlight the complexity, robustness, accuracy, performance, computational tasks, risk constraints, and profitability. The survey results indicate that DRL can provide better performance and higher efficiency as compared to the traditional algorithms while facing real economic problems in the presence of risk parameters and the ever-increasing uncertainties. [ABSTRACT FROM AUTHOR]

Network slicing is a novel key technology in 5G networks which permits to provide a multitude of heterogeneous communication services over a common network infrastructure while satisfying strict Quality of Service (QoS) requirements. Since radio spectrum resources are inherently scarce, the slicing of the radio access network should rely on a flexible resource sharing policy that provides efficient resource usage, fairness and slice isolation. In this article, we propose such a policy for bandwidth-greedy communication services. The policy implies a convex programming problem and is formalized to allow for session-level stochastic modeling. We developed a multi-class service system with service rates obtained as a solution to the optimization problem, a Markovian Arrival Process and state-dependent preemptive priorities. We use matrix-analytic methods to find the steady state distribution of the resulting continuous-time Markov chain and the expressions for important performance metrics, such as data rates. Numerical analysis illustrates the efficiency of the proposed slicing scheme compared to the complete sharing and complete partitioning policies, showing that our approach leads to a data rate about the double of that obtained under complete partitioning for the analyzed scenario. [ABSTRACT FROM AUTHOR]